Abstract
In this study, the ultimate lateral load capacity of pile driven into multi-layered soil was estimated using cone penetration test results and a method was proposed to reflect multi-layered soil conditions. For multi-layered specimens prepared with different relative density at different layers, the cone penetration tests and lateral pile load tests were conducted. Based on the test results, measured and estimated values of the ultimate lateral load were compared and analyzed. The estimated results were obtained from the methods proposed by Broms (1964), Petrasovits & Award (1972) and Prasad & Chari (1999). The method was proposed for modifying the earth pressure distribution of Prasad & Chari (1999) to consider multi-layered soil conditions. From the analysis, it was seen that results obtained from the proposed method showed improvement with less data scatter similarly to those obtained from Broms (1964) and Petrasovits & Award (1972)'s methods.
본 연구에서는 다층지반에서 수평하중을 받는 말뚝을 대상으로 콘관입치를 이용하여 극한수평지지력을 산정하였으며, 다층지반조건을 고려할 수 있는 토압분포 형태를 제안하고자 한다. 이를 위해 각 층의 상대밀도를 달리한 12개의 다층지반을 조성하여 각 지반에 대해 콘관입시험 및 수평말뚝재하시험을 수행하였으며, 각각의 다층지반조건에 대한 극한수평지지력을 비교, 분석하였다. 극한수평지지력 산정은 Broms(1964), Petrasovits & Award(1972), Prasad & Ch뼈(1999)가 제안한 방법을 기준으로 하였으며, Prasad & Chari(1999)의 방법에 대해서는 다층지반 조건을 고려하기 위한 수정된 토압분포형상을 적용하였다. 본 연구 결과, 다층지반 조건을 고려한 제안 방법이, 기존의 단일지반에 적용했던 토압분포 형상을 이용하는 방법보다 향상된 정밀도를 보여 주였다. 극한수평지지력 분포형상에 있어서도 Broms(1964), Petrasovits & Award(1972)의 방법으로 산정한 극한수평지지력과 유사한 분포를 보였다.