설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제21권7호
  • /
  • Pages.373-379
  • /
  • 2009
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

불균일한 온도분포를 갖는 열교환기 휜에서의 착상 특성

Characteristics of Frost Formed on Heat Exchanger Fins of Non-Uniform Temperature Distribution

  • 안원준 (한양대학교 대학원 기계공학과) ;
  • 김정수 (한양대학교 대학원 기계공학과) ;
  • 이관수 (한양대학교 기계공학부)
  • 발행 : 2009.07.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, frosting experiment was conducted to investigate the characteristics of frost formed on heat exchanger fins of non-uniform temperature distribution. Temperature distribution and frost characteristics of a 2-D fin surface were investigated in the airflow direction and the direction perpendicular to airflow. Temperature gradient was very small in the airflow direction, while it was large in the direction perpendicular to airflow due to fin heat conduction. The variations of the frost thickness gradient and the frost density gradient in the direction perpendicular to airflow were significant. On the other hand, the temperature gradient on frost surface in the direction perpendicular to airflow was significant at the early stage of frosting, while it decreased gradually as time elapsed.

키워드

참고문헌

  1. Cheng, C. H. and Shiu, C. C., 2002, Frost formation and frost crystal growth on a cold plate in atmospheric air flow, Int. J. of Heat and Mass Transfer, Vol. 45, pp. 4289-4303 https://doi.org/10.1016/S0017-9310(02)00134-5
  2. Lee, K. S., Kim, W. S. and Lee, T. H., 1997, A one-dimensional model for frost formation on a cold flat surface, Int. J. of Heat and Mass Transfer, Vol. 40, pp. 4359-4365 https://doi.org/10.1016/S0017-9310(97)00074-4
  3. Mao, Y., Besant, R. W. and Rezkallah, K. S., 1992, Measurement and correlations of frost properties with airflow over a flat plate, ASHRAE Trans., Vol. 91, pp. 267-281
  4. Hayashi, Y., Aoki, A., Adachi, S. and Hori, K., 1997, Study of frost properties correlating with frost formation types, Journal of Heat Transfer, Vol. 99, pp. 239-245 https://doi.org/10.1115/1.3450675
  5. $\ddot{O}$stin, R. and Anderson, S., 1991, Frost growth parameters in forced air stream, Int. J. of Heat and Mass Transfer, Vol. 34, No. 4/5, pp. 1009-1017 https://doi.org/10.1016/0017-9310(91)90012-4
  6. Lee, Y. B. and Ro, S. T., 2002, Frost formation on vertical plate in simultaneously developing flow, Experimental Thermal and Fluid Science, Vol. 26, pp. 939-945 https://doi.org/10.1016/S0894-1777(02)00216-9
  7. Lüer, A. and Beer, H., 2000, Frost deposition in a parallel plate channel under laminar flow conditions, Int. J. of Thermal Science, Vol. 39, pp. 85-95 https://doi.org/10.1016/S1290-0729(00)00193-8
  8. Yun, R., Kim, Y. C. and Min, M. K., 2002, Modeling of frost growth and frost properties with airflow over a flat plate, Int. J. of Refrigeration, Vol. 25, pp. 362-371 https://doi.org/10.1016/S0140-7007(01)00026-3
  9. Tokura, I., Saito, H. and Kishinami, K., 1983, Study on properties and growth rate of frost layers on cold surfaces, Journal of Heat Transfer, Vol. 105, pp. 895-901 https://doi.org/10.1115/1.3245679
  10. Jones, B. W. and Paker, J. D., 1975, Frost formation with varying environmental parameters, Journal of Heat Transfer, Vol. 97, pp. 255-259 https://doi.org/10.1115/1.3450350
  11. Tao, Y. X., Besant, R. W. and Mao, Y., 1993, Characteristics of frost growth on a flat plate during the early growth period, ASHRAE Trans., Vol. 99, pp. 746-753
  12. Ismail, K. A. R. and Salinas, C. S., 1999, Modeling of frost formation over parallel cold plates, Int. J. of Refrigeration, Vol. 22, pp. 425-441 https://doi.org/10.1016/S0140-7007(98)00069-3
  13. Yang, D. K. and Lee, K. S., 2005, Modeling of frosting behavior on a cold plate, Int. J. of Refrigeration, Vol. 28, pp. 396-402 https://doi.org/10.1016/j.ijrefrig.2004.08.001
  14. Yang, D. K. and Lee, K. S., 2004, Dimensionless correlations of frost properties on a cold plate, Int. J. of Heat and mass transfer, Vol. 27, pp. 89-96 https://doi.org/10.1016/S0140-7007(03)00118-X
  15. Chen, H., Thomas, L. and Besant, R. W., 2000, Modeling frost characteristics on heat exchanger fins, ASHRAE Trans., Vol. 105, pp. 357-367
  16. Xia, Y. and Jacobi, A. M., 2004, An exact solution to steady heat conduction in a twodimensional slab on a one-dimensional fin ：application to frosted heat exchangers, Int. J. of Heat and mass transfer, Vol. 47, pp. 3317-3326 https://doi.org/10.1016/j.ijheatmasstransfer.2004.01.019
  17. Kim, J. S., Kang, S. J. and Lee, K. S., 2008, Frost behavior on a one-dimensional fin considering heat conduction of heat exchanger fins, The Society Of Air-Conditioning and Refrigerating Engineers of Korea, Vol. 20, No. 11, pp. 727-732
  18. Tso, C. P., Cheng, Y. C. and Lai, A. C. K., 2006, An improved model for predicting performance of finned tube heat exchanger under frost condition, with frost thickness variation along fin, Applied Thermal Engineering, Vol. 26, pp. 111-120 https://doi.org/10.1016/j.applthermaleng.2005.04.009
  19. Thomas, L., Chen, H. and Besant, R. W., 1999, Measurement of frost characteristics on heat exchanger fins, Part I-Test facility and instrumentation, ASHRAE Trans., Vol. 105, pp. 283-293
  20. Kwon, J. T., Lim, H. J., Kwon, Y. C., Koyama, S., Kim, D. H. and Kondou, C., 2006, An experimental study on frosting of laminar air flow on cold surface with local cooling, Int. J. of Refrigeration, Vol. 29, pp. 754-760 https://doi.org/10.1016/j.ijrefrig.2005.12.009
  21. Wang, C. C., Chang, Y. J., Fan, S. J. and Sheu, W. J., 2004, Some observations of the frost formation in fin arrays, Heat Transfer Engineering, Vol. 25, pp. 35-47 https://doi.org/10.1080/01457630490520257
  22. Kim, J. S., Lee, K. S. and Yook, S. J., 2009, Frost behavior on a fin considering the heat conduction of heat exchanger fins, Int. J. of Heat and mass transfer, Vol. 52, pp. 2581-2588 https://doi.org/10.1016/j.ijheatmasstransfer.2008.12.023
  23. Lee, K. S., Jhee, S. and Yang, D. K., 2003, Prediction of the frost formation on a cold flat surface, Int. J. of Heat and Mass Transfer, Vol. 46, pp. 3789-3796 https://doi.org/10.1016/S0017-9310(03)00195-9