기어 치형 설계 프로그램 개발에 관한 연구

A Study on the Development of the Gear Profile Design Program

  • 정성필 (아주대학교 기계공학과 대학원) ;
  • 박태원 (아주대학교 기계공학과)
  • 발행 : 2009.08.01

초록

In this paper, the gear design program is presented. The profile of gears is created using classical mathematic formulations. In each gear, a kinematic joint is applied and one can define the 20 contact condition between gear pairs. Initial and boundary conditions such as force, torque, velocity, acceleration, etc. can be set. Thus, it is possible to analyze dynamic characteristics of gear pairs such as reaction moment and the variation of angular velocity. In order to find the optimal profile of gear pairs, two optimization methods based on design of experiments are inserted in the program; One is the Taguchi method and the other is the response surface analysis method. To verify the program, the rack & pinion gear is created and analyzed. Simulation results show that the developed program is useful and result data is reliable.

키워드

참고문헌

  1. Merritt, H. E., "Gear Engineering," John Wiley & Sons, Inc., 1971
  2. Dudley, D. W., "Handbook of Practical Gear Design," CRC Press, 1984
  3. Maitra, G. N., "Handbook of Gear Design," McGraw-Hill, pp. 10-17, 1985
  4. Colbourne, J. R., "The Geometry of Involute Gears," Springer-Verlag, 1987
  5. Lee, K. W. and Cho, K. Z., "A Study on the Automatic Gear Design & Analysis Program," Proc. of KSPE Spring Conference, pp. 226-229, 2000
  6. Cho. G. Y., Kim, S. C., Choi, J. U. and Song, J. C., "A Study on the Developement of Computer-Aided Automatic Design System for Gears," Journal of the Korean Society for Precision Engineering, Vol. 13, No. 5, pp. 95-103, 1996
  7. Kwak, J. S. and Chung, S. W., "Development of the Optimal Design Program and the 3-D Modeling for the Helical Gear," Journal of Korean Society of Industrial Application, Vol. 3, No. 2, pp. 107-114, 2000
  8. Jeong, H. J., Jung, Y. H. and Yun, J. D., "Developemnt of the Program for Optimum Design of Spur Gear Using Hungting Tooth," Proc. of KSPE Spring Conference, pp. 545-546, 2007
  9. Lee, K. W., Ban J. S., Kim, G. H. and Cho, K. Z., "A Study on Stress Analysis of Spur Gear Using FEM," Journal of the Korean Society for Precision Engineering, Vol. 19, No. 2, pp. 171-176, 2002
  10. Cho, S. C., "A Study the Development of Involute Sour Gears Profiles Strength," Journal of Korean Society of Industrial Application, Vol. 9, No. 4, pp. 269-276, 2006
  11. American Gear Manufactures Association: AGMA Standard for Rating the Ritting Resistance and Bending Strength of Spur and Helical Involute Gear Teeth, AGMA 218.01, 1982
  12. Song, I. H., Choi, J. H., Ryu, H. S. and Bae, D. S., "Dyamic Analysis of Spur Gear Pairs:Mesh Forces with Efficient Contact Analysis," Proc. of Korean Society of Automotive Engineers Spring Conference, pp. 779-783, 2004
  13. Tack, G. R., Chweh, S. H. and Yoon, K. Y., "A Stress Analysis on the Involute-Circular Arc Composite Tooth Profile Gear," Journal of the Korean Sociaty of Mechanical Engineers, Vol. 11, No. 2, pp. 198-204, 1987
  14. Baud, S. and Velex, P., "Static and Dynamic Tooth Loading in Spur and Helical Geared Systems-Experiments and Modle Validation," Journal of Mechanical Design, Vol. 124, No. 2, pp. 334-346, 2002 https://doi.org/10.1115/1.1462044
  15. Amos, G., "MATLAB: An Introduction with Applications," John Wiley & Sons, Inc., pp. 186-221, 2005
  16. Haug, E. J., "Computer Aided Kinematics and Dynamics of Mechanical Systems: Vol. I Basic Method," Prentice-Hall, Inc., pp. 1-301, 1988
  17. Nikravesh, P. E., "Computer Aided Analysis of Mechanical systems," Prentice-Hall, Inc., pp. 289-311, 1988
  18. Jung, S. P. and Park, T. W., "Analysis and Control of the Flexible Multibody System Using MATLAB," Transactions of KSME(A), Vol. 32, No. 5, pp. 437-443, 2008 https://doi.org/10.3795/KSME-A.2008.32.5.437
  19. Shabana, A. A. and Sany, J. R., "An Augmented Formulation for Mechanical Systems with Non-Generalized Coordinates: Application to Rigid Body Contact Problems," Nonliner Dynamics, Vol. 24, No. 2, pp. 183-204, 2001 https://doi.org/10.1023/A:1008362309558
  20. Jung, S. P. and Park, T. W., "An Optimum Design of a Gas Circuit Breaker Using Design of Experiments," Mechanics Based Design of Structures and Machines, Vol. 36, No. 4, pp. 346-363, 2008 https://doi.org/10.1080/15397730802405895
  21. Kuang, J. H. and Yang, Y. T., "An Estimate of Mesh Stiffness And Load Sharing Ratio of a Spur Gear Pair," Proceedings of the 6th International Power Transmission and Gearing Conference, pp. 1-9, 1992
  22. Jung, S. P. and Park, T. W., "Development of the Optimization Design Module of a Brake System," Transactions of Korean Society of Automotive Engineers, Vol. 16, No. 3, pp. 166-171, 2008