Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Improvement of Dynamic Characteristic of Large-Areal Planar Stage Using Induction Principle

인덕션 방식을 이용한 평면 스테이지의 동특성 개선

  • 정광석 (충주대학교 기계공학과) ;
  • 박준규 (충주대학교 기계공학과 대학원) ;
  • 김효준 (강원대학교 기계자동차공학부 기계공학과)
  • Published : 2009.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Instead of direct driving like BLDC, the induction principle is adopted as a driving one for planar stage. The stage composed of four linear induction motors put in square type is activated by two-axial forces; low-frequency attractive force and thrust force of the linear induction motors. Here, the modified vector control whose new inputs are q-axis current and dc current biased to three phase current instead of d-axis current or flux current is applied extensively to overall motion of the stage. For the developed system, the precision step test and the constant velocity test are tried to guarantee its feasibility for TFT-LCD pattern inspection. However, to exclude a discontinuity due to phase shift and minimize a force ripple synchronized with the command frequency, the initial system is revised to the antagonistic structure over the full degree of freedom. Concretely describing, the porous air bearings guide an air-gapping of the stage up and down and a pair of liner induction motors instead of single motor are activated in the opposite direction each other. The performances of the above systems are compared from trapezoid tracking test and sinusoidal test.

Keywords

References

  1. TFT-LCD Equipment Report, DisplaySearch, 2007
  2. 한혁, 서민호, '평판디스플레이 요소장비, LCD 장비,' KISTI TCI report, 2006
  3. W. Gao, S. Dejima, H. Yanai, K. Katakura, S. Kiyono, and Y Tomita, 'A surfuce motor-driven planar motion stage integrated with an $XY\theta_z$surface encoder for precision positioning,' Precision Engineering, vol. 28, pp. 329-337, 2004 https://doi.org/10.1016/j.precisioneng.2003.12.003
  4. 디지털 노광장비 핵심 기술 개발 기획 보고서, 지식경제부, 2008
  5. Y. Ogino, Y. Murakami, K. Ohishi, and M. Nakaoka, 'High perfonnance control in ultra-low speed range of inverter-fed linear induction motor using vector control scheme,' Proc. of the 5th Conf. Power Electronics and Applications, vol. 5, pp. 464-467,1993
  6. H. S. Hahn and J. L. Sanders, 'Perfonnance analysis of a LIMbased high-speed tool delivery system for machining,' Int. J. Prod Res., vol. 32, no. 1, pp. 179-207, 1994 https://doi.org/10.1080/00207549408956923
  7. I. Takahashi and M. Iwata, 'High resolution position control under 1 sec. of an induction motor with full digitized methods,' Proceedings of IEEE-IAS, pp. 632-638, 1989 https://doi.org/10.1109/IAS.1989.96715
  8. D. F. Spicer, J. N. Sackett, and C. T. Black, 'Precision X-Y positioning systems using linear induction motors,' lEE Colloquium on Limited Motion Electrical Actuation System, pp.6/1-6/3, 1998 https://doi.org/10.1049/ic:19980931
  9. F. J. Henley, 'Flat panel in-process test, repair and inspection : An overview,' SID Digest, pp. 623-627, 1992
  10. W. E. Hinds, Controlling movement oflinear induction motor, US Patent 6215260, 2001
  11. 정광석, 이상현, '대면적 비접촉 스테이지에의 구동기 적용을 위한 선형유도기의 변형된 2축 벡터 제어기,' 제어, 로봇, 시스템학회 논문지, 제14권 제4호, pp.385-391, 2008 https://doi.org/10.5302/J.ICROS.2008.14.4.385
  12. P. Vas, Sensorless Vector and Direct Torque Control, OXFORD University PRESS, 1996
  13. I. Takahashi and Y. Ide, 'Decoupling control of thrust and attractive force of a LIM using a space vector control inverter,' IEEE Transactions on Industry Application, vol. 29, no. 1, pp.161-167,1993 https://doi.org/10.1109/28.195902
  14. J. A. Santisteban and R. M. Stephan, 'Vector control methods for induction motor machines : An overview,'IEEE Transactions on Education, vol. 44, no. 2, pp. 170-175,2001 https://doi.org/10.1109/13.925828

Cited by

  1. Screw Motion and Control of Conductive Rod by Rotating a Spiral Electrodynamic Wheel vol.17, pp.9, 2011, https://doi.org/10.5302/J.ICROS.2011.17.9.882