대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제33권8호
  • /
  • Pages.760-766
  • /
  • 2009
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

HDD 액추에이터의 스웨이징성능향상을 위한 베이스플레이트 최적설계

Baseplate Design to Improve Swaging Performance of Actuator in a HDD

  • 이행수 (울산과학대학 디지털기계학부) ;
  • 홍어진 (삼성전자 스토리지사업부)
  • 발행 : 2009.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the manufacturing process of HDD, ball swaging method is commonly used to joint the Head Gimbal Assembly(HGA) with the arm of the actuator. The hub on the HGA is placed into the hole of the actuator arm, and the hub and arm is bonded by the pressure of steel ball. The pressure for plastic deformation on the baseplate causes the undesirable deformation on HGA, such as tilting, flying height change of head. After obtaining the key parameters that have large sensitivity on the swaging process, the optimal shape of baseplate is proposed to increase the static performance during swaging process. Contribution of the proposed design for the swaging performance is verified by contact simulation with elasto-plastic deformation.

키워드

참고문헌

  1. Wadhwa, S. K., 1996, 'Material Compatibility and Some Understanding of the Ball Swaging Process,' IEEE Trans. of Magnetics, Vol. 32, No. 3, pp. 1837~1842 https://doi.org/10.1109/20.492874
  2. Kamnerdtong, T., Chutima, S. and Ekintumas, K., 2005, 'Effects of Swaging Process Parameters on Specimen Deformation,' 8th Asian Symp. on Visualization, pp. 50.1~50.7
  3. Kenichiro, A. and Keiji, A., 2006, 'Numerical Ball Swaging Analysis of Head Arm for Hard Disk Drives,' ASME/JSME Joint Conf. on MIPE, S05-04
  4. Lee, H. S., Kim, Y. H., Hwang, T. Y. and Kim, C. S., 2005, 'VCM Design to Improve Dynamic Performance of Actuator in a Disk Drive,' IEEE Trans. of Magnetics, Vol. 41, No. 2, pp. 774~778 https://doi.org/10.1109/TMAG.2004.840312
  5. Lim, P. and Yang, G. E., 2007, 'Optimization of Finish Cutting Condition of Impeller with Five-axis Machine by Response Surface Method,' Trans. of KSME, A, Vol. 31, No. 9, pp. 924~933 https://doi.org/10.3795/KSME-A.2007.31.9.924
  6. Han, S. Y., Maeng, J. S. and Kim, S. H., 2004, 'Parameter Optimization of a Micro-Static Mixer Using Successive Response Surface Method,' Trans. of KSME, A, Vol. 28, No. 9, pp. 1314~1319 https://doi.org/10.3795/KSME-A.2004.28.9.1314
  7. Davis, R., 1998, Minitab Lab Manual, Duxbury Press.
  8. Lee, S. B., 2008, Experiments Design Based on Applications, Eretec Inc.