A Optimal Method of Sensor Node Deployment for the Urban Ground Facilities Management

도시지상시설물 관리를 위한 최적 센서노드 배치 방법

  • Kang, Jin-A (Ubiquitous Land Research Division, Korea Institute of Construction Technology) ;
  • Nam, Sang-Kwan (Ubiquitous Land Research Division, Korea Institute of Construction Technology) ;
  • Kwon, Hyuk-Jong (Solution Group, WAVUS Corporation) ;
  • OH, Yoon-Seuk (Ubiquitous Land Research Division, Korea Institute of Construction Technology)
  • 강진아 (한국건설기술연구원 유비쿼터스국토연구실) ;
  • 남상관 (한국건설기술연구원 유비쿼터스국토연구실) ;
  • 권혁종 ((주) 웨이버스 솔루션 부문) ;
  • 오윤석 (한국건설기술연구원 유비쿼터스국토연구실)
  • Received : 2009.11.19
  • Accepted : 2009.12.21
  • Published : 2009.12.31

Abstract

As nation and society progresses, urban ground facilities and their management system get more complicated and the cost and effort to control the system efficiently grows exponentially. This study suggests to the deployment method of a sensor node by Wireless Sensor Network for controling the Urban Ground Facilities of National Facilities. First, we achieve the management facilities and method using the first analysis and then make the coverage of sensing and then set up the Sensor Node in Urban Ground Facilities. Second, we propose the solution way of repetition by the second analysis. And, we embody the GIS program by Digital Map and this method, we improve the reality by overlapping an aerial photo. Also we make an experience on the sensor node allocation using making program. we can remove the repetition sensor node about 50%, and we can confirm that the sensor nodes are evenly distributed on the road.

국가와 도시가 급속히 발전할수록 국민생활에 필요한 기반시설물들과 관리 체계는 날로 복잡해지고, 이를 체계적으로 건설하고 유지하는 비용과 노력이 기하급수적으로 증가한다. 본 연구에서는 국가기반시설물 중 도시지상시설물을 무선 센서 네트워크로 관리하기 위해 센서노드를 설치하는 방법을 제시하였다. 먼저, 1차 분석으로 관리 대상 및 방법을 도출하여 센싱 커버리지를 만든 후, 이를 도시지상시설물에 센서노드 설치에 적용하였다. 그리고 2차 분석을 통하여 중복설치 문제의 해결 방안을 제시하였다. 제시된 방법과 수치지도를 활용하여 GIS 프로그램을 구현하였으며, 항공사진과의 중첩을 통해 관리의 방법에 현실성을 향상시켰다. 개발된 프로그램을 사용하여, 한국건설기술연구원 주변 지형에 대해 센서노드 실험을 실시하였다. 그 결과 중복 설치된 센서노드를 약 50% 제거하였으며, 도로를 따라 센서노드가 골고루 배치된 것을 확인할 수 있었다.

Keywords

References

  1. 김태영, 최혁재, 이종언, 차시호, 강석주, 조국현, 조민호. 2008. 센서의 성능에 미치는 환경 요소에 기반한 센서 노드 배치 방법. 한국통신학회 논문지 33(10):894-903.
  2. 김정은, 윤만기, 한정희, 이창건, 하은용. 2008. 유비쿼터스 센싱 인프라 구축을 위한 최적센서 배치 방법. 한국컴퓨터종합학술대회 35(1):313-317.
  3. 전문장, 심규원, 김 민. 2009. 과수의 생육환경 모니터링을 위한 유비쿼터스 센서 네트워크의적용. 한국지리정보학회지 12(3):56-65.
  4. 김우승, 김진석. 2008. 대규모 무선 센서 네트워크에서 게이트웨이 배치와 연결성. 한국컴퓨터종합학술대회 논문집 35(1):342-345.
  5. 김의명, 강민수, 이진영, 김병헌, 김호준, 김인현. 2006. 유비쿼터스 기술을 이용한 시설물 관리. 한국지리정보학회지 9(4):105-118.
  6. 오동진, 박재현. 2006. SPIN을 이용한 무선 이동 센서 네트워의 배치 알고리즘 검증. 한국정보처리학회지 13(3):391-398.
  7. Sharp, C., S. Schaffert, A. Woo, N. Sastry, C. Karlof, S. Sastry and D. Culler. 2005. Design and implementation of a sensor network system for vehicle tracking and autonomous interception. IEEE EWSN.
  8. Poduri S., B. Har-Peled., B, Krishnamachari. and G.S. Sukhatme. 2006. Sensor network cofiguration and the curse of dimensionality, IEEE Workshop on Embeded Networked Sensors, Cambridge, MA.
  9. Zou. Y. and K. Chakrabarty. 2003. Sensor deployment and target localization based on Virtual Forces, IEEE INFOCOM Conference, pp.1293-1303.
  10. Liu, X. and P. Mahapatra. 2005. On the deployment of wireless sensor nodes. In Proceedings of the Third International Workshop on Measurement, Modeling, and Performance Analysis of Wireless Sensor Networks, in conjunction with MobiQuitous, ACM Press