Structural Engineering and Mechanics

  • 제33권6호
  • /
  • Pages.765-779
  • /
  • 2009
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Damage assessment of reinforced concrete beams including the load environment

  • Zhu, X.Q. (School of Engineering, The University of Western Sydney, Kingswood Campus) ;
  • Law, S.S. (Civil and Structural Engineering Department, The Hong Kong Polytechnic University) ;
  • Hao, H. (School of Civil and Resource Engineering, The University of Western Australia)
  • 투고 : 2007.01.09
  • 심사 : 2009.10.14
  • 발행 : 2009.12.20
⟨ 이전 논문 다음 논문 ⟩

초록

Quantitative condition assessment of structures has been traditionally using proof load test leading to an indication of the load-carrying capacity. Alternative approaches using ultrasonic, dynamics etc. are based on the unloaded state of the structure and anomalies may not be fully mobilized in the load resisting path and thus their effects are not fully included in the measured responses. This paper studies the effect of the load carried by a reinforced concrete beam on the assessment result of the crack damage. This assessment can only be performed with an approach based on static measurement. The crack damage is modelled as a crack zone over an area of high tensile stress of the member, and it is represented by a damage function for the simulation study. An existing nonlinear optimization algorithm is adopted. The identified damage extent from a selected high level load and a low load level are compared, and it is concluded that accurate assessment can only be obtained at a load level close to the one that creates the damage.

키워드

참고문헌

  1. Banan, M.R. and Hjelmstad, K.D. (1994), "Parameter estimation of structures from static response. I. Computational aspects", J. Struct. Eng., ASCE, 120(11), 3243-3258 https://doi.org/10.1061/(ASCE)0733-9445(1994)120:11(3243)
  2. Cerri, M.N. and Vestroni, F. (2000) "Detection of damage in beams subjected to diffused cracking", J. Sound Vib., 234(2), 259-276 https://doi.org/10.1006/jsvi.1999.2887
  3. Goldfarb, D. and Idnani, A. (1983), "A numerically stable dual method for solving strictly convex quadratic problems", Math. Program., 27, 1-33 https://doi.org/10.1007/BF02591962
  4. Law, S.S., Ward, H.S., Shi, G.B., Chen, R.Z., Waldron, P. and Taylor, C. (1995), "Dynamic assessment of bridge load carrying capacities –II", J. Struct. Eng., ASCE, 121(3), 488-495 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(488)
  5. Maeck, J., Abdel Wahab, M., Peeters, B., De Roeck, G., De Visscher, J., De Wilde, W.P., Ndambi, J.-M. and Vantomme, J. (2000) "Damage identification in reinforced concrete structures by dynamic stiffness determination", Eng. Struct., 22(10), 1339-1349 https://doi.org/10.1016/S0141-0296(99)00074-7
  6. Wahab, M.M., De Roeck, G. and Peeters, B. (1999), "Parameterization of damage in reinforced concrete structures using model updating", J. Sound Vib., 228(4), 717-730 https://doi.org/10.1006/jsvi.1999.2448
  7. Wang, X., Hu, N., Fukunaga, H. and Yao, Z.H. (2001), "Structural damage identification using static test data and changes in frequencies", Eng. Struct., 23, 610-621 https://doi.org/10.1016/S0141-0296(00)00086-9

피인용 문헌

  1. Substructural interface force identification with limited vibration measurements vol.6, pp.3, 2016, https://doi.org/10.1007/s13349-016-0157-8
  2. Time domain identification of multiple cracks in a beam vol.35, pp.6, 2010, https://doi.org/10.12989/sem.2010.35.6.773
  3. Dynamic field monitoring data analysis of an ancient wooden building in seismic and operational environments vol.11, pp.6, 2016, https://doi.org/10.12989/eas.2016.11.6.1043
  4. A Two-Step Approach for Structural Damage Localization and Quantification Using Static and Dynamic Response Data vol.18, pp.9, 2015, https://doi.org/10.1260/1369-4332.18.9.1415
  5. A Bonding Damage Detection Method with Force-Based Beam Element vol.14, 2011, https://doi.org/10.1016/j.proeng.2011.07.147
  6. A layered beam element for modeling de-bonding of steel bars in concrete and its detection using static measurements 2018, https://doi.org/10.1002/stc.2142
  7. Bilinear elastodynamical models of cracked concrete beams vol.39, pp.4, 2011, https://doi.org/10.12989/sem.2011.39.4.465
  8. Vibration analysis of a cracked beam with axial force and crack identification vol.9, pp.4, 2009, https://doi.org/10.12989/sss.2012.9.4.355
  9. Vibration Reduction Using Tuned Mass Dampers in Composite Steel Box Girder Footbridge with Self-Anchored Suspension vol.21, pp.8, 2009, https://doi.org/10.1142/s0219455421501108