Structural Engineering and Mechanics

  • 제33권6호
  • /
  • Pages.747-763
  • /
  • 2009
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration of mitred and smooth pipe bends and their components

  • Redekop, D. (Department of Mechanical Engineering, University of Ottawa) ;
  • Chang, D. (Department of Mechanical Engineering, University of Ottawa)
  • 투고 : 2009.04.20
  • 심사 : 2009.10.08
  • 발행 : 2009.12.20
⟨ 이전 논문 다음 논문 ⟩

초록

In this work, the linear vibration characteristics of $90^{\circ}$ pipe bends and their cylindrical and toroidal shell components are studied. The finite element method, based on shear-deformation shell elements, is used to carry out a vibration analysis of metallic multiple $90^{\circ}$ mitred pipe bends. Single, double, and triple mitred bends are considered, as well as a smooth bend. Sample natural frequencies and mode shapes are given. To validate the procedure, comparison of the natural frequencies is made with existing results for cylindrical and toroidal shells. The influence of the multiplicity of the bend, the boundary conditions, and the various geometric parameters on the natural frequency is described. The differential quadrature method, based on classical shell theory, is used to study the vibration of components of these bends. Regression formulas are derived for cylindrical shells (straight pipes) with one or two oblique edges, and for sectorial toroidal shells (curved pipes, pipe elbows). Two types of support are considered for each case. The results given provide information about the vibration characteristics of pipe bends over a wide range of the geometric parameters.

키워드

참고문헌

  1. ADINA, AUI 8.2 (2003), User Interface Primer and AUI Command Reference Manual, ADINA R & D Inc., Watertown, MA
  2. ANSYS (2005), Release 10.0 - Documentation for ANSYS, ANSYS Inc., Canonsburg, PA
  3. Baylac, G. and Copin, A. (1975), "Vibration studies of the primary circuit of the Chinon 3 reactor", Proceedings 3rd Int. Conf. on Struct. Mech. in React. Tech., Paper F4/3, London, Sept
  4. Bert, C.W. and Malik, M. (1996), "Free vibration analysis of thin cylindrical shells by the differential quadrature method", J. Pres. Ves. Tech., 118, 1-12 https://doi.org/10.1115/1.2842156
  5. Blevins, R.D. (1979), Formulas for Natural Frequency and Mode Shape, Van Nostrand Reinhold, New York
  6. Budiansky, B. (1968), "Notes on nonlinear shell theory", J. Appl. Mech., 35, 393-401 https://doi.org/10.1115/1.3601208
  7. Carneiro, J.O., de Melo, F.J.Q., Rodrigues, J.F.D., Lopes, H. and Teixeira, V. (2005), "The modal analysis of a pipe elbow with realistic boundary conditions", Int. J. Pres. Ves. Pip., 82, 593-601 https://doi.org/10.1016/j.ijpvp.2005.04.001
  8. Chang, D. and Redekop, D. (2007), "Collapse analysis of multiple $90{^{\circ}}$ mitred pipe bends", Proceedings 3rd Int. Conf. on Struct. Eng. Mech. & Comp. (SEMC 2007), Cape Town, Sept. 10-12, 8 pages
  9. Chang, D. and Redekop, D. (2008), "Stress analysis of pressurized multiple 90o mitred pipe bends", Proceedings 4th Int. Conf. on Advances in Struct. Eng. and Mech. (ASEM '08), Korea, 11 pages
  10. Grimes, R.G., Lewis, J.G. and Simon, H.D. (1994), "A shifted block Lanczos algorithm for solving sparse symmetric generalized eigenproblems", SIAM J. Matrix Anal. A., 15(1), 228-272 https://doi.org/10.1137/S0895479888151111
  11. Hinton, E., Sienz, J. and Ozakca, M. (2003), Analysis and Optimization of Prismatic and Axisymmetric Shell Structures, Springer, Berlin
  12. Hu, X.J. and Redekop, D. (2003), "Blending functions for vibration analysis of a cylindrical shell with an oblique end", Int. J. Struct. Stab. Dyn., 3, 405-418 https://doi.org/10.1142/S0219455403000987
  13. Ming, R.S., Pan, J. and Norton, M.P. (2002), "Free vibrations of elastic circular toroidal shells", Appl. Acoust., 63, 513-528 https://doi.org/10.1016/S0003-682X(01)00051-2
  14. Leissa, A.W. (1973), Vibration of Shells, NASA SP-288, Scientific and Technical Information Office, Washington
  15. Orynyak, I.V., Radchenko, S.A. and Batura, A.S. (2007), "Calculation of natural and forced vibrations of a piping system. Part 2. Dynamic stiffness of a pipe bend", Strength Mater., 39(2), 144-158 https://doi.org/10.1007/s11223-007-0020-6
  16. Redekop, D. (1994), "Natural frequency of a short curved pipe", Trans. CSME, 18, 35-45
  17. Redekop, D. and Chang, D. (2008), "Linear vibration analysis of multiple 90o mitred pipe bends", Proc. 3rd Int. Conf. on Advances in Struct. Eng. and Mech. (ASEM '08), Korea, 10 pages
  18. Redekop, D. (2004), "Vibration analysis of a torus-cylinder shell assembly", J. Sound Vib., 277, 919-930 https://doi.org/10.1016/j.jsv.2003.09.034
  19. Salley, L. and Pan, J. (2002), "A study of the modal characteristics of curved pipes", Appl. Acoust., 63, 189-202 https://doi.org/10.1016/S0003-682X(01)00027-5
  20. Soedel, W. (2006), Vibration of Shells and Plates, 3rd Ed., Marcell Dekker, New York
  21. Shu, C. (2000), Differential Quadrature and Its Application in Engineering, Springer, Berlin
  22. Wachel, J.C., Morton, S.H. and Atkins, K.E. (1990), "Piping vibration analysis", Proc. 19th Turbomachinery Symposium, College Station, Texas, 119-134
  23. Wang, X.H., Xu, B. and Redekop, D. (2006), "Theoretical natural frequencies and mode shapes for thin and thick curved pipes and toroidal shells", J. Sound Vib., 292, 424-434 https://doi.org/10.1016/j.jsv.2005.07.049
  24. Wood, J. (2008), "A review of literature for the structural assessment of mitred bends", Int. J. Pres. Ves. Pip., 85(5), 275-294 https://doi.org/10.1016/j.ijpvp.2007.11.003