DOI QR코드

DOI QR Code

On the steel cost of circular flat-bottomed silos designed using the Eurocodes

  • Gonzalez-Montellano, Carlos (BIPREE Research Group (Buildings, Infrastructures and Projects for Rural and Environmental Engineering). Universidad Politecnica de Madrid.) ;
  • Ramirez, Alvaro (BIPREE Research Group (Buildings, Infrastructures and Projects for Rural and Environmental Engineering). Universidad Politecnica de Madrid.) ;
  • Gallego, Eutiquio (BIPREE Research Group (Buildings, Infrastructures and Projects for Rural and Environmental Engineering). Universidad Politecnica de Madrid.) ;
  • Ayuga, Francisco (BIPREE Research Group (Buildings, Infrastructures and Projects for Rural and Environmental Engineering). Universidad Politecnica de Madrid.)
  • 투고 : 2008.06.02
  • 심사 : 2009.09.23
  • 발행 : 2009.11.30

초록

Nowadays, Eurocodes have become the reference standards for silo design within the European Union. They include new procedures for load assessment and structural verifications aiming to design safer silos. However, many silo manufacturers are still reluctant to use them (or at least all their prescriptions) because of the loss of competitiveness they are experiencing in comparison with former standards. This paper shows how steel cost of flat-bottomed circular silos varies when different silo geometries and stored materials are considered. The influence of critical structural verifications on steel costs, such as buckling of the silo wall, were also analyzed and some conclusions and practical recommendations for silo designers were proposed.

키워드

참고문헌

  1. AFNOR P22-630 (1992), Construction m$\dot{e}$tallique Silos en acier: calcul des actions dans les cellules
  2. Brown, C.J and Nielsen, J. (1998), Silos: Fundamentals of Theory, Behaviour and Design. E & FN Spon. London. 835 pp
  3. DIN 1055-6 (1986), Actions on structures. Design loads for buildings and loads in silo bins. Deutsches Institut f$\ddot{u}$r Normung, Berlin, May
  4. EN 1991-4 (2006), Actions on structures. Silos and tanks. Brussels, CEN
  5. EN 1993-4-1 (2007), Design of steel structures. Silos. Brussels, CEN
  6. EN 1993-1-1 (2003), Design of steel structures. General rules and rules for buildings. Brussels, CEN
  7. EN 1993-1-8 (2005), Design of steel structures. Design of joints. Brussels, CEN
  8. Moya, M., Guaita, M., Aguado, P. and Ayuga, F. (2006), 'Mechanical properties of granular agricultural materials. Part 2', T. ASABE, 49(2), 479-489
  9. Moya, M., Ayuga, F., Guaita, M. and Aguado, P. (2002), 'Mechanical properties of granular agricultural materials', T. ASAE, 45(5), 1569-1577
  10. Rotter, J.M. (1998), 'Shell structures: the new European standard and current research needs', Thin Wall. Struct., 31(1-3), 3-23 https://doi.org/10.1016/S0263-8231(98)00005-6
  11. Rotter, J.M. (2001), Guide for the Economic Design of Circular Metal Silos. Spon Press. London
  12. Vidal, P., Guaita, M. and Ayuga, F. (2005), 'Discharge from cylindrical slender steel silos: Finite element simulation and comparison with Eurocode 1', T. ASABE, 48(6), 2315-2321 https://doi.org/10.13031/2013.20095

피인용 문헌

  1. A simplified analytical procedure for assessing the worst patch load location on circular steel silos with corrugated walls vol.33, pp.6, 2011, https://doi.org/10.1016/j.engstruct.2011.02.032
  2. Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection vol.21, pp.12, 2018, https://doi.org/10.1177/1369433218754698