Structural Engineering and Mechanics

  • 제32권5호
  • /
  • Pages.587-608
  • /
  • 2009
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Development of analytical modeling for an energy-dissipating cladding panel

  • Maneetes, H. (Department of Architectural Engineering, The Pennsylvania State University) ;
  • Memari, A.M. (Department of Architectural Engineering, The Pennsylvania State University)
  • 투고 : 2008.07.15
  • 심사 : 2009.06.11
  • 발행 : 2009.07.30
⟨ 이전 논문 다음 논문 ⟩

초록

Modern earthquake-resistant design aims to isolate architectural precast concrete panels from the structural system so as to reduce the interaction with the supporting structure and hence minimize damage. The present study seeks to maximize the cladding-structure interaction by developing an energy-dissipating cladding system (EDCS) that is capable of functioning both as a structural brace, as well as a source of energy dissipation. The EDCS is designed to provide added stiffness and damping to buildings with steel moment resisting frames with the goal of favorably modifying the building response to earthquake-induced forces without demanding any inelastic action and ductility from the basic lateral force resisting system. Because many modern building facades typically have continuous and large openings on top of the precast cladding panels at each floor level for window system, the present study focuses on spandrel type precast concrete cladding panel. The preliminary design of the EDCS was based on existing guidelines and research data on architectural precast concrete cladding and supplemental energy dissipation devices. For the component-level study, the preliminary design was validated and further refined based on the results of nonlinear finite element analyses. The stiffness and strength characteristics of the EDCS were established from a series of nonlinear finite element analyses and are discussed in detail in this paper.

키워드

참고문헌

  1. American Concrete Institute (ACI) Committee 318. (2002), Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02), ACI, Farmington Hills, Michigan
  2. Arnold, C., Hopkins, D.C. and Elsesser, E. (1987), Design and Detailing of Architectural Elements for Seismic Damage Control, Building Systems Development, Inc., KRTA Limited and Forell/ Elsesser Engineers, San Mateo, CA
  3. Craig, J.I., Goodno, B.J., Pinelli, J.P. and Moor, C. (1992), "Modeling and evaluation of ductile cladding connection systems for seismic response attenuation in buildings", Proceedings, 10th World Conference on Earthquake Engineering, Rotterdam, Netherlands, 4183-4188
  4. Ellis, B.R. (1980), "An assessment of the accuracy of predicting the fundamental natural frequencies of buildings and the implications concerning the dynamic analysis of the structures", Proceedings, Institution of Civil Engineers, Part II, 69, 763-776 https://doi.org/10.1680/iicep.1980.2376
  5. El-Gazairly, L.F. and Goodno, B.J. (1989), "Dynamic analysis of a high-rise building damaged in the mexico earthquake including cladding-structure interaction", Proceedings, International Symposium on Architectural Precast Concrete Cladding – Its Contribution to Lateral Resistance of Buildings, PCI, Chicago, IL, 257-286
  6. Fanning, P. (2001), "Nonlinear models of reinforced and post-tensioned concrete beams", Elect. J. Struct. Eng.,2, 111-119
  7. Gaiotti, R. and Smith, B.S. (1992), "Stiffening of moment-resisting frame by precast concrete cladding", PCI J.,37(5), 80-92 https://doi.org/10.15554/pcij.09011992.80.92
  8. Goodno, B.J. and Craig, J.I. (1998), "Ductile cladding connection systems for seismic design", Report No. NIST GCR 98-758, National Institute of Standards and Technology, Gaithersburg, MD
  9. Goodno, B.J., Craig, J.I., El-Gazairly, L.F. and Hsu, C.C. (1992), "Use of advanced cladding systems for passive control of building response in earthquakes", Proceedings, 10th World Conference on Earthquake Engineering, Madrid, Spain, 4195-4200
  10. Goodno, B.J. and Will, K.M. (1978), "Dynamic analysis of a high-rise building including cladding-structure interaction effects", Proceedings, Conference on Computers in Civil Engineering, Atlanta, GA, 623-638
  11. Grigorian, C.E., Yang, T.S. and Popov, E.P. (1993), "Slotted bolted connection energy dissipators", Earthq. Spect., EERI, 9(3), 491-504 https://doi.org/10.1193/1.1585726
  12. Idelsohn, S.R., Onate, E. and Dvorkin, E.N., eds. (1998), Computational Mechanics. New Trends and Applications, CIMNE, Barcelona, Spain
  13. Maneetes, H. (2007), "Development of a seismic dissipating mechanism for precast concrete cladding panels",Ph.D. Thesis, Pennsylvania State University, University Park, PA
  14. McMullin (2000), http://www.engr.sjsu.edu/mcmullin/research/cladding/
  15. Meyyappa, M., Palsson, H. and Craig, J.I. (1981), "Modal parameter estimation for a highrise building using ambient response data taken during construction", Proceedings, 2nd Specialty Conference on Dynamic Response of Structures: Experimentation, Observation, Prediction, and Control, Atlanta, GA, 141-151
  16. Pall, A.S., Marsh, C. and Fazio, P. (1980), "Friction joints for seismic control of large panel structures", Journal of Prestressed Concrete Institute, 25(6), 38-61
  17. Petkovski, M. and Waldron, P. (1995), "Seismic behavior of reinforced concrete frames with energy dissipating cladding", European Seismic Design Practice, Balkema, Rotterdam, Netherlands
  18. Pinelli, J.P., C., Craig, J.I., Goodno, B.J. and Hsu, C.C. (1993), "Passive control of building response using energy dissipating cladding connections", Earthq. Spect., 9(3), 529-546 https://doi.org/10.1193/1.1585728
  19. Precast/Prestressed Concrete Institute (PCI). (1989), Architectural Precast Concrete, 2nd ed., PCI, Chicago, IL
  20. Precast/Prestressed Concrete Institute (PCI). (2004), PCI Design Handbook: Precast and Prestressed Concrete,6th ed., PCI, Chicago, IL
  21. Timoshenko, S.P. and Goodier, J.N. (1970), Theory of Elasticity, 3rd ed., McGraw-Hill, Singapore
  22. Uchida, N., Aoygai, T., Kawamura, M. and Nakagawa, K. (1973), "Vibration test of steel frame having precast concrete panels", Proceedings, 5th World Conference on Earthquake Engineering, Rome, Italy, 1167-1176
  23. Wiss, J.F and Curth, O.E. (1970), "Wind deflections of tall concrete frame buildings", J. Struct. Div., ASCE,96(ST7), 1461-1480
  24. Wolanski, A.J. (2004), "Flexural behavior of reinforced and prestressed concrete beams using finite element analysis", Master Thesis, Marquette University, Milwaukee, WI