Structural Engineering and Mechanics

  • 제32권2호
  • /
  • Pages.251-267
  • /
  • 2009
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Bond slip modelling and its effect on numerical analysis of blast-induced responses of RC columns

  • Shi, Yanchao (School of Civil Engineering, Tianjin University) ;
  • Li, Zhong-Xian (School of Civil Engineering, Tianjin University) ;
  • Hao, Hong (School of Civil & Resource Engineering, the University of Western Australia, School of Civil Engineering, Tianjin University)
  • 투고 : 2009.01.11
  • 심사 : 2009.03.13
  • 발행 : 2009.05.30
⟨ 이전 논문 다음 논문 ⟩

초록

Reinforced concrete (RC) structures consist of two different materials: concrete and steel bar. The stress transfer behaviour between the two materials through bond plays an important role in the load-carrying capacity of RC structures, especially when they subject to lateral load such as blast and seismic load. Therefore, bond and slip between concrete and reinforcement bar will affect the response of RC structures under such loads. However, in most numerical analyses of blast-induced structural responses, the perfect bond between concrete and steel bar is often assumed. The main reason is that it is very difficult to model bond slip in the commercial finite element software, especially in hydrodynamic codes. In the present study, a one-dimensional slide line contact model in LS-DYNA for modeling sliding of rebar along a string of concrete nodes is creatively used to model the bond slip between concrete and steel bars in RC structures. In order to model the bond slip accurately, a new approach to define the parameters of the one-dimensional slide line model from common pullout test data is proposed. Reliability and accuracy of the proposed approach and the one-dimensional slide line in modelling the bond slip between concrete and steel bar are demonstrated through comparison of numerical results and experimental data. A case study is then carried out to investigate the bond slip effect on numerical analysis of blast-induced responses of a RC column. Parametric studies are also conducted to investigate the effect of bond shear modulus, maximum elastic slip strain, and damage curve exponential coefficient on blast-induced response of RC columns. Finally, recommendations are given for modelling the bond slip in numerical analysis of blast-induced responses of RC columns.

키워드

참고문헌

  1. Alsiwat, J.M. and Saatcioglu, M. (1992), 'Reinforcement anchorage slip under monotonic loading', J. Struct. Eng., 118(9), 2421-2438 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:9(2421)
  2. Bischoff, P.H. and Perry, S.H. (1991), 'Compressive behavior of concrete at high strain rate', Mater. Struct., 24, 425-450 https://doi.org/10.1007/BF02472016
  3. Eligehausen, R., Popov, E.P. and Bertero, V.V. (1983), 'Local bond stress-slip relationships of deformed bars under generalized excitations', Earthquake Engineering Research Center, University of California, Berkeley, Berkeley
  4. Gambarova, P.G. (1989), 'Steel-to-concrete bond after concrete splitting. Test results', Mater. Struct., 22(127), 35-47 https://doi.org/10.1007/BF02472693
  5. Gaston, J.R., Siess, C.P. and Newmark, N.M. (1972), “A layered finite element non-linear analysis of reinforced concrete plates and shells”, Civil Engineering Studies, University of Illinois, Urbana
  6. Girard, C. and Bastien, J. (2002), 'Finite-element bond-slip model for concrete columns under cyclic loads', J. Struct. Eng., 128(12), 1502-1510 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1502)
  7. Kwak, H.-G. and Kim, S.-P. (2001), 'Bond-slip behavior under monotonic uniaxial loads', Eng. Struct., 23(3), 298-309 https://doi.org/10.1016/S0141-0296(00)00008-0
  8. Lehman, D.E. and Moehle, J.P. (2000), 'Seismic performance of well-confined concrete bridge columns', University of California, Berkeley, Berkeley
  9. Li, Q.M. and Lu, Y.B. (2008), 'Compressive strength of hydrostatic-stress-sensitive materials at high strainrates', Transactions Tianjin Univ., 14(5), 324-328 https://doi.org/10.1007/s12209-008-0055-1
  10. LS-DYNA. (2006), 'Keyword User’s Manual', Livermore Software Technology Coporation, California
  11. Luccioni, B.M., Ambrosini, R.D. and Danesi, R.F. (2004), 'Analysis of building collapse under blast loads', Eng. Struct., 26, 63-71 https://doi.org/10.1016/j.engstruct.2003.08.011
  12. Luccioni, B.M. and Luege, M. (2006), 'Concrete pavement slab under blast loads', Int. J. Impact Eng., 32(8), 1248-1266 https://doi.org/10.1016/j.ijimpeng.2004.09.005
  13. Luccioni, B.M., Lopez, D.E. and Danesi, R.F. (2005), 'Bond-slip in reinforced concrete elements', J. Struct. Eng., 131(11), 1690-1698 https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1690)
  14. Malvar, L. (1998), 'Review of static and dynamic properties of steel reinforcing bars', ACI Mater. J., 95(6), 609-16
  15. Malvar, L.J. (1991), “Bond of reinforcement under controlled confinement”, Naval Civil Engineering Laboratory, Port Hueneme
  16. Malvar, L.J. (1992), 'Bond of reinforcement under controlled confinement', ACI Mater. J., 89(6), 593-601
  17. Malvar, L.J. and Ross, C.A. (1999), 'Review of strain rate effects for concrete in tension', ACI Mater. J., 96(5), 614-16
  18. Meng, H. and Li, Q.M. (2003), 'Correlation between the accuracy of a SHPB test and the stress uniformity based on numerical experiments', Int. J. Impact Eng., 28(5), 537-55 https://doi.org/10.1016/S0734-743X(02)00073-8
  19. Mirza, S.M. and Houde, J. (1979), 'Study of bond-slip relationships in reinforced concrete', ACI J., 76(1), 19-46
  20. Moetaz, M.E. and Sameer, A.H. (1996), 'Bond shear modulus of reinforced concrete at high temperatures', Eng. Fract. Mech., 55(6), 991-999 https://doi.org/10.1016/S0013-7944(96)00049-5
  21. Morita, S. and Fujii, S. (1985), 'Bond-slip models in finite element analysis', Finite Elem. Anal. Reinforced Concrete Struct., 348-363
  22. Naito, C.J. and Wheaton, K.P. (2006), 'Blast assessment of load-bearing reinforced concrete shear walls', Practice Period. Struct. Des. Constr., 11(2), 112-121 https://doi.org/10.1061/(ASCE)1084-0680(2006)11:2(112)
  23. Nilson, A.H. (1968), 'Nonlinear analysis of reinforced concrete by the finite element method', ACI J., 65(9), 757-766
  24. Oh, B.H. and Kim, S.H. (2007), 'Realistic models for local bond stress-slip of reinforced concrete under repeated loading', J. Struct. Eng., 133(2), 216-224 https://doi.org/10.1061/(ASCE)0733-9445(2007)133:2(216)
  25. Sezen, H. and Setzler, E.J. (2008), 'Reinforcement slip in reinforced concrete columns', ACI Struct. J., 105(3), 280-289
  26. Tepfers, R. and Olsson, P. (1992), 'Ring test for evaluation of bond properties of reinforcing bars', International Conference Bond in Concrete from Research to Practice, Riga, Latvia 189-199
  27. Weatherby, J.H. (2003), 'Investigation of bond slip between concrete and steel reinforcement under dyanmic loading conditions', Mississippi State University, Mississippi
  28. Woodson, S.C. and Baylot, J.T. (1999), 'Structural collapse: Quarter-scale model experiments', Technical Report SL-99-8, US Army Corps of Engineers Engineer Research and Development Center
  29. Woodson, S.C. and Baylot, J.T. (2000), 'Quarter-scale building/column experiments', Advanced Technology in Structural Engineering, Philadelphia, Pennsylvania, USA, 1-6
  30. Zhou, X.Q., Kuznetsovb, V.A. Hao, H. and Waschl, J. (2008), 'Numerical prediction of concrete slab response to blast loading', Int. J. Impact Eng., 35(10), 1186-1200 https://doi.org/10.1016/j.ijimpeng.2008.01.004

피인용 문헌

  1. Meso-scale modelling of steel fibre reinforced concrete with high strength vol.165, 2018, https://doi.org/10.1016/j.conbuildmat.2018.01.028
  2. Development of P-I diagrams for FRP strengthened RC columns vol.38, pp.5, 2011, https://doi.org/10.1016/j.ijimpeng.2010.10.029
  3. Response of reinforced concrete columns impacted by tsunami dispersed 20′ and 40′ shipping containers vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.07.034
  4. Implementation of Bond-Slip Performance Models in the Analyses of Non-Ductile Reinforced Concrete Frames Under Dynamic Loads 2020, https://doi.org/10.1080/13632469.2017.1401565
  5. The Effect of Lap Splice Length on the Cyclic Lateral Load Behavior of RC Members with Low-Strength Concrete and Plain Bars vol.17, pp.5, 2014, https://doi.org/10.1260/1369-4332.17.5.639
  6. Numerical investigations on static and dynamic responses of reinforced concrete sub-assemblages under progressive collapse vol.149, 2017, https://doi.org/10.1016/j.engstruct.2016.07.042
  7. Numerical study of ultra-high-performance steel fibre–reinforced concrete columns under monotonic push loading 2017, https://doi.org/10.1177/1369433217747710
  8. Numerical Analysis of FRP-Composite-Strengthened RC Panels with Anchorages against Blast Loads vol.25, pp.5, 2011, https://doi.org/10.1061/(ASCE)CF.1943-5509.0000199
  9. A simplified model of catenary action in reinforced concrete frames under axially restrained conditions vol.69, pp.21, 2017, https://doi.org/10.1680/jmacr.17.00009
  10. Effect of blast loading on CFRP-Retrofitted RC columns - a numerical study vol.8, pp.1, 2011, https://doi.org/10.1590/S1679-78252011000100004
  11. Cyclic Tests on Concrete Reinforcement for Development of Seismic Bond Model vol.114, pp.4, 2017, https://doi.org/10.14359/51689777
  12. Simulation of Tests on Cast-In and Postinstalled Column-to-Foundation Connections to Quantify the Effect of Cyclic Loading vol.142, pp.1, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001330
  13. Study on Impact Behavior and Impact Force of Bridge Pier Subjected to Vehicle Collision vol.2017, 2017, https://doi.org/10.1155/2017/7085392
  14. On the numerical modelling of bond for the failure analysis of reinforced concrete 2018, https://doi.org/10.1016/j.engfracmech.2017.10.008
  15. Performance of Reinforced Concrete Columns Impacted by Water-Borne Shipping Containers vol.15, pp.8, 2012, https://doi.org/10.1260/1369-4332.15.8.1307
  16. Investigating the effect of bond slip on the seismic response of RC structures vol.46, pp.5, 2013, https://doi.org/10.12989/sem.2013.46.5.695
  17. Progressive Collapse Resistance of RC Frames under a Side Column Removal Scenario: The Mechanism Explained vol.10, pp.2, 2016, https://doi.org/10.1007/s40069-016-0134-y
  18. Numerical analysis of shear transfer across an initially uncrack reinforced concrete member vol.102, 2015, https://doi.org/10.1016/j.engstruct.2015.08.022
  19. Pressure–Impulse (P–I) Diagrams for Reinforced Concrete (RC) Structures: A Review pp.1886-1784, 2018, https://doi.org/10.1007/s11831-018-9260-9
  20. Simulation of Real Defect Geometry and Its Detection Using Passive Magnetic Inspection (PMI) Method vol.8, pp.7, 2018, https://doi.org/10.3390/app8071147
  21. Debonding failure analysis of FRP-retrofitted concrete panel under blast loading vol.38, pp.4, 2009, https://doi.org/10.12989/sem.2011.38.4.479
  22. Effects of blast-induced random ground motions on the stochastic behaviour of industrial masonry chimneys vol.43, pp.6, 2012, https://doi.org/10.12989/sem.2012.43.6.835
  23. New methodology to prevent blasting damages for shallow tunnel vol.15, pp.6, 2009, https://doi.org/10.12989/gae.2018.15.6.1227
  24. Mechanism of Progressive Collapse Resistance of RC Frames Subjected to a Center Column Loss vol.267, pp.None, 2019, https://doi.org/10.1088/1755-1315/267/5/052066
  25. Numerical formulation of P-I diagrams for blast damage prediction and safety assessment of RC panels vol.75, pp.5, 2009, https://doi.org/10.12989/sem.2020.75.5.607
  26. Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column vol.28, pp.None, 2020, https://doi.org/10.1016/j.istruc.2020.08.084
  27. FRP 기둥 재킷 시스템이 보강된 지진 취약 철근콘크리트 건축물의 유한요소해석 vol.21, pp.2, 2021, https://doi.org/10.9712/kass.2021.21.2.57