초록
탄소 섬유와 유리 섬유를 체적 비율 1 : 8.8로 조합하여 강성이 높은 탄소 섬유가 인장에 저항한 후 먼저 파단되고 그 후 유리 섬유가 인장에 저항하여 높은 연성을 발휘하도록 한 하이브리드 시트를 제작하고 시트 길이를 100, 200, 400 mm로 각각 다르게 하여 시트 길이에 따른 콘크리트와 하이브리드 시트 계면에서의 부착 특성에 대해 고찰하였다. 실험 결과, 시트의 유효 부착 길이는 100$\sim$200 mm 사이에서 존재하고, 시트의 콘크리트 계면에서의 효율적인 부착강도를 발휘하기 위해서는 150 mm 이상의 부착 길이가 확보되어야 하며, 콘크리트와 하이브리드 시트 계면에서의 부착강도는 대략 3.0 MPa이고 슬립량은 0.175 mm로 나타나는 것을 알 수 있었다.
12 concrete blocks, on which hybrid fibrous sheets (carbon fiber and glass fiber) had been bonded, were subjected to tensile load in order to estimate properties of the bonded interface. the sheet length was varied by 100mm, 200mm and 400mm. It was found that more than 150mm bond length is required to achieve the maximum bearing capacity of the interface. In this study, maximum bond stress $\tau_{F,max}$, ultimate slip $S_{FU}$ of the interface were estimated $\tau_{F,max}$=3.0MPa and $S_{FU}$= 0.175mm, respectively.