References
- P. C. Hidber, W. Helbig, E. Kim, and G. M. Whitesides, Langmuir, 12, 1375 (1996) https://doi.org/10.1021/la9507500
- J. B. Hajdu, Plat. Surf. Finish., 83, 29 (1996)
- D. O. Kim, W. I. Shon, J. M. Jin, and S. H. Oh, Polymer (Korea), 31, 410 (2007)
- D. O. Kim, W. I. Shon, J. M. Jin, and S. H. Oh, Polymer (Korea), 31, 184 (2007)
- T. H. Lim, Y. M. Jeon, and M. S. Gong, Polymer(Korea), Submitted
- Z. Hou, S. Dante, N. L. Abbott, and P. Stroeve, Langmuir, 15, 3011 (1999) https://doi.org/10.1021/la981644b
- S. Meltzer, R. Resch, B. E. Koel, M. E. Thompson, A. Madhukar, A. A. G. Requicha, and P. Will, Langmuir, 17, 1713 (2001) https://doi.org/10.1021/la001170s
- K. R. Brown and M. J. Natan, Langmuir, 14, 726 (1998) https://doi.org/10.1021/la970982u
- A. M. T. van de Putten, J. W. G. de Bakker, and L. G. J. Fokkink, J. Electrochem. Soc., 139, 3475 (1992) https://doi.org/10.1149/1.2069102
- V. P. Menon and C. R. Martin, Anal. Chem., 67, 1920 (1995) https://doi.org/10.1021/ac00109a003
- S. Hrapovic, Y. Liu, G. Enright, F. Bensebaa, and J. H. T. Luong, Langmuir, 19, 3958 (2003) https://doi.org/10.1021/la0269199
- D. I. Gittins, A. S. Susha, B. Schoeler, and F. Caruso, Adv. Mater., 14, 508 (2002) https://doi.org/10.1002/1521-4095(20020404)14:7<508::AID-ADMA508>3.0.CO;2-T
- O. Siiman and A. Burshteyn, J. Phys. Chem. B, 104, 9795 (2000) https://doi.org/10.1021/jp000255z
- B. H. Jun, J. H. Kim, H. Park, J. S. Kim, K. N. Yu, S. M. Lee, H. Choi, S. Y. Kwak, Y. K. Kim, D. H. Jeong, M. J. Cho, and Y. S. Lee, J. Comb. Chem., 9, 237 (2007) https://doi.org/10.1021/cc0600831
- G. H. Yang, E. T. Kang, and K. G. Neoh, Appl. Surf. Sci., 178, 165 (2001) https://doi.org/10.1016/S0169-4332(01)00325-7
- W. C. Wang, E. T. Kang, and K. G. Neoh, Appl. Surf. Sci., 199, 52 (2002) https://doi.org/10.1016/S0169-4332(02)00473-7
- A. L. Dearden, P. J. Smith, D. Y. Shin, N. Reis, B. Derby, and P. O'Brien1, Macromol. Rapid Commun., 26, 315 (2005) https://doi.org/10.1002/marc.200400445
- M. S. Park, T. H. Lim, Y. M. Jeon, J. G. Kim, S. W. Joo, and M. S. Gong, Macromol. Res., 16, 308 (2008) https://doi.org/10.1007/BF03218522
- M. S. Park, T. H. Lim, Y. M. Jeon, J. G. Kim, S. W. Joo, and M. S. Gong, Sens. Actuators B, 133, 166 (2008) https://doi.org/10.1016/j.snb.2008.02.008
- M. S. Park, T. H. Lim, Y. M. Jeon, J. G. Kim, S. W. Joo, and M. S. Gong, J. Colloid Interf. Sci., 321, 60 (2008) https://doi.org/10.1016/j.jcis.2008.01.053
- R. Alessio, D. B. Dell'Amico, F. Calderazzo, U. Englert, A. Guarini, L. Labella, and P. Strasser, Helv. Chim. Acta, 18, 219 (1998)
- D. B. Dell'Amico, F. Calderazzo, L. Labella, F. Marchetti, and G. Pampaloni, Chem. Rev., 103, 3857 (2003) https://doi.org/10.1021/cr940266m
- Poly(methylmethacrylate-co-ethyleneglycol dimethacrylate) (3-10 μm. 5% cross-linked) beads were purchased from Aldrich Chem. Co
- Electroless plating was carried out using a multi-step processes which included: etching, rinsing, conditioning, sensitization, activation, acceleration and electroless silver plating. MMA (5 g) beads were etched in NaOH (1 M, 500 mL) at 70 oC for 4 h prior to use, rinsed in distilled water, and conditioned in a solution of PEG-1000 (1 g) and water (500 mL) for 5 min. Surface sensitization was performed by immersing these beads on an aqueous solution containing SnCl2 (2 g) and water (100 mL) for 3 min. Beads were then rinsed in a solution of PdCl2 (1 g) and distilled water (1000 mL) for 3 min, and treated with 10% HCl (the accelerator). They were then rinsed with distilled water and completely dried at 40 oC. These pretreated MMA beads (0.5 g) were then dispersed in a solution of PVP (0.1 g)/methanol (40 mL) in a polypropylene container (to avoid silvering of the reaction vessel). To this dispersion was added a solution of silver 2-ethylhexylcarbamate (0.3 g, silver content 10%) in methanol (10 mL) and a solution of hydrazine (0.2 g) in methanol (10 mL) with stirring to increase the density and thickness of the silver coating for 30 min. Finally, the PMMA-Ag composites were filtered and washed with methanol by centrifugation
- The silver 2-ethylhexylcarbamate complex solution (Ag-EHCB, silver content, 10%) was supplied from Inktec Co. Ltd. (Korea)