DOI QR코드

DOI QR Code

Discrete Optimization for Vibration Design of Composite Plates by Using Lamination Parameters

  • Honda, Shinya (Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University) ;
  • Narita, Yoshihiro (Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University) ;
  • Sasaki, Katsuhiko (Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University)
  • Received : 2008.08.04
  • Accepted : 2008.09.04
  • Published : 2009.12.01

Abstract

A design method is proposed to optimize the stacking sequence of laminated composite plates for desired vibration characteristics. The objective functions are the natural frequencies of the laminated plates, and three types of optimization problems are studied where the fundamental frequency and the difference of two adjacent frequencies are maximized, and the difference between the target and actual frequencies is minimized. The design variables are a set of discrete values of fiber orientation angles with prescribed increment in the layers of the plates. The four lamination parameters are used to describe the bending property of a symmetrically laminated plate, and are optimized by a gradient method in the first stage. A new technique is introduced in the second stage to convert from the optimum four lamination parameters into the stacking sequence that is composed of the optimum fiber orientation angles of all the layers. Plates are divided into sub-domains composed of the small number of layers and designed sequentially from outer domains. For each domain, the optimum angles are determined by minimizing the errors between the optimum lamination parameters obtained in the first step and the parameters for all possible discrete stacking sequence designs. It is shown in numerical examples that this design method can provide with accurate optimum solutions for the stacking sequence of vibrating composite plates with various boundary conditions.

Keywords

References

  1. W. C. Bert, Optimal design of a composite-material plate to maximize its fundamental frequency, J. Sound Vibr. 50, 229–237 (1977) https://doi.org/10.1016/0022-460X(77)90357-1
  2. W. C. Bert, Design of clamped composite-material plates to maximize fundamental frequency, J. Mech. Design 1, 274–278 (1978)
  3. T. Y. Kam and R. R. Chang, Optimal design of laminated composite plates with dynamic and static considerations, Comput. Struct. 32, 387–393 (1992)
  4. S. Adali and V. E. Verijenko, Optimum stacking sequence design of symmetric hybrid laminates undergoing free vibrations, Compos. Struct. 54, 131–138 (2001) https://doi.org/10.1016/S0263-8223(01)00080-0
  5. R. L. Riche and R. T. Haftka, Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm, AIAA J. 31, 951–956 (1993) https://doi.org/10.2514/3.11710
  6. J. L. Pelletier and S. S. Vel, Multi-objective optimization of fiber reinforced composite laminates for strength, stiffness and minimal mass, Computers and Structures 84, 2065–2080 (2006) https://doi.org/10.1016/j.compstruc.2006.06.001
  7. Y. Narita, Layerwise optimization for the maximum fundamental frequency of laminated composite plate, J. Sound Vibr. 263, 1005–1016 (2003) https://doi.org/10.1016/S0022-460X(03)00270-0
  8. Y. Narita and G. J. Turvey, Maximizing the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimization approach, J. Mech. Engng Sci. 218, 681–691 (2004) https://doi.org/10.1243/0954406041319554
  9. Y. Narita, Maximum frequency design of laminated plates with mixed boundary conditions, Intl J. Solid Struct. 43, 4342–4356 (2006) https://doi.org/10.1016/j.ijsolstr.2005.06.104
  10. Z. G$\ddot{u}$rdal, R. T. Haftka and P. Hajela, Design and Optimization of Laminated Composite Materials. Wiley, London (1999)
  11. H. Fukunaga and H. Sekine, Stiffness design method of symmetric laminates using lamination parameters, AIAA J. 30, 2791–2793 (1992) https://doi.org/10.2514/3.11304
  12. H. Fukunaga, H. Sekine and M. Sato, Optimal design of symmetric laminated plates for fundamental frequency, J. Sound Vibr. 171, 219–229 (1994) https://doi.org/10.1006/jsvi.1994.1115
  13. H. Fukunaga, H. Sekine, M. Sato and A. Iino, Buckling design of symmetrically laminated plates using lamination parameters, Computers and Structures 57, 643–649 (1995) https://doi.org/10.1016/0045-7949(95)00050-Q
  14. J. L. Grenestedt, Layup optimization and sensitivity analysis of the fundamental eigenfrequency of composite plates, Compos. Struct. 12, 193–209 (1989) https://doi.org/10.1016/0263-8223(89)90022-6
  15. A. Serge, Design of mulitspan composite plates to maximize the fundamental frequency, Composites 26, 691–697 (1995) https://doi.org/10.1016/0010-4361(95)91135-R
  16. A. Todoroki and R. T. Haftka, Stacking sequence optimization by a genetic algorithm with a new recessive gene like repair strategy, Composites Part B: Engng 29, 277–285 (1998) https://doi.org/10.1016/S1359-8368(97)00030-9
  17. A. Todoroki and T. Ishikawa, Design of experiments for stacking sequence optimizations with genetic algorithm using response surface approximation, Compos. Struct. 64, 349–357 (2004) https://doi.org/10.1016/j.compstruct.2003.09.004
  18. R. Matsuzaki and A. Todoroki, Stacking-sequence optimization using fractal branch-and-bound method for unsymmetrical laminates, Compos. Struct. 78, 537–550 (2007) https://doi.org/10.1016/j.compstruct.2005.11.015
  19. M. Kameyama and H. Fukunaga, Optimum design of composite plate wings for aeroelastic characteristics using lamination parameters, Computers and Structures 85, 213–224 (2007) https://doi.org/10.1016/j.compstruc.2006.08.051
  20. S. Setoodeh, M. M. Abdalla and Z. Gürdal, Design of variable-stiffness laminates using lamination parameters, Composites Part B: Engng 37, 301–309 (2006) https://doi.org/10.1016/j.compositesb.2005.12.001
  21. M. M. Abdalla, S. Setoodeh and Z. Gürdal, Design of variable stiffness composite panels for maximum fundamental frequency using lamination parameters, Compos. Struct. 81, 283–291 (2007) https://doi.org/10.1016/j.compstruct.2006.08.018
  22. S. Setoodeh, M. M. Abdalla, S. T. Ijsselmuiden and Z. G$\ddot{u}$rdal, Design of variable-stiffness composite panels for maximum buckling load, Compos. Struct. 87, 109–117 (2009) https://doi.org/10.1016/j.compstruct.2008.01.008
  23. Z. G$\ddot{u}$rdal and R. Olmedo, In-plate response of laminates with spatially varying fiber orientations: variable stiffness concept, AIAA J. 31, 751–758 (1993) https://doi.org/10.2514/3.11613
  24. K. Yamazaki, Two-level optimization technique of composite laminate panels by genetic algorithms, in: Proc. AIAA/ASME/ASCE/AHS/ASC Struct., Struct. Dynamics, Mater. Conf. Exhibit, 37th, Salt Lake City, UT, April 15–17, AIAA-96-1539-CP, pp. 1882–1887 (1996)
  25. M. Autio, Determining the real lay-up of a laminate corresponding to optimal lamination parameters by genetic search, Struct. Multidiscipl. Optimization 20, 301–310 (2000) https://doi.org/10.1007/s001580050160
  26. Y. Narita, Combinations for the free-vibration behaviors of anisotropic rectangular plates under general edge condition, J. Appl. Mech. 67, 568–573 (2000) https://doi.org/10.1115/1.1311959
  27. G. N. Vanderplaats and H. Sugimoto, A general-purpose optimization program for engineering design, Comp. Struct. 24, 13–21 (1986) https://doi.org/10.1016/0045-7949(86)90331-7
  28. W. H. Press, S. A. Teukolsky,W. T. Vetterling and B. P. Flannery, Numerical Recipes in Fortran 77. Cambridge University Press, London (1992)