References
- 1993, Tidman, D.A. and Massey, D.W., "Electrothermal Light Gas Gun," IEEE Trans. Magn., Vol.29, pp.621-624 https://doi.org/10.1109/20.195647
- 1997, White, K.J., Katulka, G.L., Khong, T. and Nekula, K., "Plasma Characterization for Electrothermal-Chemical Gun Applications," ARL-TR-1491, U.S. Army Research Laboratory, Aberdeen Proving Ground
- 1999, Nusca, M.J., White, K.J., Williams, A.W., Landsberg, A.M., Young, T.R. and Lind, C.A., "Computational and Experimental Investigations of Open-Air Plasma Discharges," AIAA Paper 99-0865
- 2008, Pekker, L., "A Zero Dimensional Time-Dependent Model of High Pressure Ablative Capillary Discharge," AIAA Paper 2008-3891
- 1997, Peterson, D.R., "Design and Operation of the Electrogun, an Electrothermal Gun for Producing Metal and Carbon Plasma Jets," IEEE Trans. Magn., Vol.33, pp.373-378 https://doi.org/10.1109/20.560040
- 2008, Kim, K. and Peterson, D.R., "A Low Aspect Ratio Electrothermal Gun for Metal Plasma Vapor Discharge and Ceramic Nanopowder Production," J. Mech. Sci. Technol., Vol.22, pp.1408-1416 https://doi.org/10.1007/s12206-008-0414-9
- 1997, Kohel, J.M., Su, L.K., Clemens, N.T. and Varghese, P.L., "Emission Spectroscopic Measurements and Analysis of a Pulsed Plasma Jet," IEEE Trans. Magn., Vol.35, pp.201-206
- 1992, Powell, J.D. and Zielinski, A.E., "Theory and Experiment for an Ablating-Capillary Discharge and Applications to Electrothermal-Chemical Guns," BRL-TR-3355, U.S. Army Ballistic Research Laboratory, Aberdeen Proving Ground
- 2001, Zaghloul, M.F., Bourham, M.A. and Doster, J.M., "Semi-Analytical Modelling and Simulation of the Evolution and Flow of Ohmically-Heated Non-Ideal Plasmas in Electrothermal Guns," J Phys. D: Appl. Phys., Vol.34, pp.772-786 https://doi.org/10.1088/0022-3727/34/5/316
- 2003, Kim, K., "Time-Dependent One-Dimensional Modeling of Pulsed Plasma Discharge in a Capillary Plasma Device," IEEE Trans. Plasma Sci., Vol. 31, pp.729-735 https://doi.org/10.1109/TPS.2003.815472
- 2008, Kim, K., "Transient Flowfield Characteristics of Polycarbonate Plasma Discharge from Pulse-Powered Electrothermal Gun Operation," J Therm. Spray Technol., Vol.17, pp.517-524 https://doi.org/10.1007/s11666-008-9204-2
- 1975, Schmidt, E.M. and Shear, D.D., "Optical Measurements of Muzzle Blast," AIAA J., Vol.13, pp.1086-1091 https://doi.org/10.2514/3.60506
- 1987, Liebermann, R.W. and Zollweg, R.J., "Electrical Conductivity of Nonideal Plasmas," J. Appl. Phys., Vol.62, pp.3621-3627 https://doi.org/10.1063/1.339265
- 1995, Batteh, J., Powell, J., Sink, D. and Thornhill, L., "A Methodology for Computing Thermodynamic and Transport Properties of Plasma Mixtures in ETC Injectors," IEEE Trans. Magn., Vol.31, pp.388-393 https://doi.org/10.1109/20.364656
- 1993, Boris, J.P., Landsberg, A.M., Oran, E.S. and Gardner, J.H., "LCPFCT - Flux-Corrected Transport Algorithm for Solving Generalized Continuity Equations," NRL MR 6410-93-7192, Naval Research Laboratory, Washington, D.C.
- 1976, Boris, J.P., "Flux-Corrected Transport Modules for Generalized Continuity Equations," NRL MR 3237, Naval Research Laboratory, Washington, D.C.