고자속밀도와 저손실 특성을 갖는 중주파수대 철심재료 개발 및 응용

Development of Core Material with High Magnetic Induction and Low Iron Loss for Middle-Frequency Applications

  • 발행 : 2009.06.01

초록

Thin-gauged 3% silicon steel sheets having a highly grain-oriented texture have been developed as a core material for applications of middle-frequency (400 Hz ${\sim}$ 10 kHz) devices. The newly developed sheets with a tension coating showed an excellent reduction in iron loss at 400 Hz (iron loss at 1.0 T and 400 Hz = 4.677 W/kg, iron loss at 1.5 T and 400 Hz = 9.742 W/kg) due to high magnetic induction, $B_{10}$(measured induction at 1000 A/m), of over 1.9 T. In cases of frequencies below 400 Hz, magnetic induction, $B_{10}$, of the sample plays a major role to reduce its iron loss as excitation induction increases, whereas, in case of frequency of 1 kHz, thickness dependence becomes dominant due to a lower iron loss at relatively thinner sample. The sheets with a high magnetic induction, therefore, are favorable for high excitation induction (over 1.0 T) and low excitation frequency (below 400 Hz) applications, whereas the sheets that can reduce eddy current loss by reducing thickness or domain wall width are advantageous for low excitation induction (below 1.0 T) and high excitation frequency (around 1 kHz) applications.

키워드

참고문헌

  1. N. P. Goss, U. S. Patent 1965559, 1934
  2. C. G. Dunn, "On the detemination of preferrde orientations", J. Appl. Phys., Vol. 30 No. 6, pp. 850-857, 1959 https://doi.org/10.1063/1.1735252
  3. K. Foster, J. J. Kramer and C. W. Wiener, "Growth rates of surface controlled secondary grains in 3 pct Si-Fe Sheets", Trans. AIME, vol. 227, pp.185-188, 1963.
  4. N. H. Heo, K. H. Chai, J. G. Na, J. Kim, J. S. Woo, "Nucleation and development of Goss testure and magnetic induction in thin-gauged 3% Si-Fe alloy", J. Appl. Phys., Vol. 85, No. 8, pp. 6022-6024, 1999 https://doi.org/10.1063/1.369069
  5. M. Nakano, K. Ishiyama and K. I. Arai, "Production of ultra thin grain oriented silicon steel sheets" IEEE Trans. Magn., Vol. 31, No. 6, pp. 3886-3888, 1995 https://doi.org/10.1109/20.489805
  6. N. H. Heo, S. B. Kim, Y. S. Choi, S. S. Cho, K. H. Chai and S. O. Han, "Seletive nucleation and growth in 3% silicon steel" IEEE Trans. Magen., Vol. 38, No. 5, pp. 3195-3197, 2002 https://doi.org/10.1109/TMAG.2002.802412
  7. Hiroi Yamaguchi, Mineo Muraki, Michiro Komatsubara, "Application of CVD method on grain-oriented electrical steel", Surface & Coating Tech., 200, pp. 3351-3354, 2006 https://doi.org/10.1016/j.surfcoat.2005.07.051
  8. T. Shimazu and M. Shiozaki, "Effect of grain size and frequency on eddy current loss in Si-Fe sheets", IEEE Trans. Magn., Vol. 26, No. 5, pp. 1972-1974, 1990 https://doi.org/10.1109/20.104587
  9. W. G. Morris, J. W. Shilling, D. R, Fecich and P. Rao, "Effect of forsterite oatings on the domain structure of grain-oriented 3-percent Si-Fe", IEEE Trans. Magn., Vol. MAG-14, No. 1, pp. 14-17, 1978
  10. S. D. Washko and E. G. Choby, "Evidence for the effectivenss of stress coatings in improving the magnetic properties of high permeability 3% Si-Fe" IEEE Trans. Magn., Vol. MAG-15, No. 6, pp. 1586-1591, 1979
  11. M. Nakamura K. Hirose, T Iuchi, S. Yamaguchi and Y. Ohya, "Characteristics of laser irradiation grain oriented silicon steel", IEEE Trans. Magn., Vol. MAG-18, No. 6, pp. 1508-1510, 1982
  12. K. Sato, A. Honda, K. Nakano, M. Ishida, B. Fukuda, and T. Kan, "Development of domain refined grain-oriented silicon steel by grooving", J. Appl. Phys., Vol. 73, No. 10, pp. 6609-6611, 1993 https://doi.org/10.1063/1.352526
  13. M. Nakano, K. Ishiyama, K. I. Arai, "Production of ultra thin grain oriented silicon steel sheets", IEEE Trans. Magn., Vol. 31, No. 6, pp. 3886-3888, 1995 https://doi.org/10.1109/20.489805
  14. K. H. Chai, N. H. Heo, S. S. Cho, J. G. Na, S. R. Lee, "Effet of flow rate of hydrogen on seletive growth kinetics and magnetic induction in thin gauged 3% Si-Fe strip", J. Appl. Phys., Vol. 91, No. 10, pp. 8192-8194, 2002. https://doi.org/10.1063/1.1452219
  15. K. Honda, S. Kaya, "On the magnetization of single crystais of iron", Sci. Reports Tohoku Univ., Vol. 15, pp. 721-753, 1926
  16. Y. Ushigami, M. Mizokami, M. Fujikura, T. Kubota, H. Fujii, K. Murakami, "Recent development of low-loss grain-oriented silicon steel." J. Magn. Magn. Mater, 254-255, pp. 307-341, 2003.
  17. K. Foster and J. M. Jackson, "Effect of anneal coatings and surface condition on magnetic properties of grain oriented 3% Si-Fe", IEEE Trans. Magn., Vol. MAG-16, No. 5, pp.743-745, 1980