The Transactions of the Korean Institute of Electrical Engineers P (전기학회논문지P)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Development of In-Flex System using the Flexibility Aluminum Clad Cable

가요성 알루미늄피 케이블을 이용한 인플렉스 시스템의 개발

  • 정순원 (ETRI 융합부품.소재연구부문 Post-Doc) ;
  • 구경완 (호서대학교 국방과학기술학과)
  • Published : 2009.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The developed in-flex system completed the wiring work with the plug-in connection. To maintain electrical and mechanical stability, and an insulation between the conductors was strengthened by forming a partition. Moreover, the error according to a bad connection was prevented by separating the inlet from the outlet of the electric trace and thus the quick construction become possible. The metal reinforcing material was added outside the upper case and lower case. The fire-resistance efficiency was maximized in order to minimize a damage by the fire. As to the developed system, we found that it takes shorter time to complete installation than the rigid steel conduit wiring work, and that about 25 % of construction cost was saved because the labor costs decrease due to the shorter construction period of time.

Keywords

References

  1. L. O. Hoeft, B.Bergsrud, E. W. Tokarsky, "Measured surface transfer impedance of braided cable shields made from metal clad aramid yarn blended with metal wires", IEEE International Symposium on Electromagnetic Compatibility, Vol. 2, pp. 887-890, 2000
  2. S. C. Roberts, R. L. Evans, "Preparation of shielded metal clad cables for sealing in classified locations", Record of Conference Papers - Annual Petroleum and Chemical Industry Conference, pp. 219-225, 1988
  3. V. Hoffmann, H. Rudolph, "Modular automotive wiring systems", VDI Berichte, Iss. 1789, pp. 579-591, 2003
  4. T. Ashment, "Designing high-reliability wiring systems with modular composite rectangular connectors", Connector Specifier, Vol. 4, Iss. 12, pp. 17-18, 1988
  5. A. Gibson, "Emerging applications for copper-clad steel and aluminum wire", Wire Journal International, Vol. 41, Iss. 2, pp. 142-148, 2008
  6. Y. Li, X. Zhao, Y. Li, "Vision-based detection of weld pool width in TIG welding of copper-clad aluminum cable", China Welding (English Edition), Vol. 16, Iss, 3, pp. 27-31, 2007
  7. N. Chow, "In-line cleaning of steel core wire for the manufacture of aluminum clad steel wire", Wire Journal International, Vol. 35, Iss. 2, pp. 104-109, 2002
  8. H. Kanithi, D. Phillips, C. King, B. Zeitlin, "Development and characterization of aluminum clad superconductors", IEEE Transactions of Magnetics, Vol. 24, Iss. 2. pp. 1029-1032, 1987 https://doi.org/10.1109/20.11403