참고문헌
- Charles Seife, Sun in a bottle, Viking Penguin, New York (2008)
- G.S. Lee et al., “The KSTAR project: An advanced steady state superconducting tokamak experiment,” Nucl. Fusion, 40, 575 (2000) https://doi.org/10.1088/0029-5515/40/3Y/319
- G.S. Lee et al., “Design and construction of the KSTAR tokamak,” Nucl. Fusion, 41, 1515 (2001) https://doi.org/10.1088/0029-5515/41/10/318
- M. Kwon et al., “A strategic plan of Korea for developing fusion energy beyond ITER,” Fusion Eng. Design, 83, 883 (2008) https://doi.org/10.1016/j.fusengdes.2008.06.009
- L.A. Artsimovich, “Tokamak devices,” Nucl. Fusion, 12, 215 (1972) https://doi.org/10.1088/0029-5515/12/2/012
- Keilhacker M. and the JET team, “High fusion performance from deuterium-tritium plasmas in JET,” Nucl. Fusion, 39, 209 (1999) https://doi.org/10.1088/0029-5515/39/2/306
- H. L. Yang, and et al., “Construction, Assembly and Commissioning of KSTAR Main Structure,” Nucl. Eng. Technol., 40, 439 (2008) https://doi.org/10.5516/NET.2008.40.6.439
- Y. K. Oh, et al., “Design Overview of KSTAR Magnet Structures,” 19th Symposium on Fusion Engineering, 19, 400 (2002) https://doi.org/10.1109/FUSION.2002.1027722
- Y. K. Oh, et al., "KSTAR Magnet Structure Design," IEEE Trans. Applied Superconductivity, 11, 2066 (2001) https://doi.org/10.1109/77.920262
- S. Lee, et al “Fabrication of cables for the backgroundfield magnet system of SSTF,” IEEE Trans. on Applied Superconductivity, 12, 583 (2002) https://doi.org/10.1109/TASC.2002.1018471
- B. Lim, et al., “Fabrication of the KSTAR superconducting CICC,” IEEE Trans. on Applied Superconductivity, 12, 591 (2002) https://doi.org/10.1109/TASC.2002.1018473
- B. Lim, et al., “Development of CICC for KSTAR TF Coil System,” IEEE Trans. on Applied Superconductivity, 13, 1496 (2003) https://doi.org/10.1109/TASC.2003.812752
- K. Kim, et al., “Status of the KSTAR Superconducting Magnet System Development,” Nucl. Fusion, 45, 783 (2005) https://doi.org/10.1088/0029-5515/45/8/003
- H. J. Ahn, et al., “Engineering Design Status of KSTAR TF Coil Structure,” IEEE Trans. Applied Superconductivity, 12, 492 (2002) https://doi.org/10.1109/TASC.2002.1018450
- C. H. Choi, et al., “Electromagnetic Loads on the KSTAR Magnet System,” IEEE Trans. on Applied Superconductivity, 12, 534 (2002) https://doi.org/10.1109/TASC.2002.1018460
- Pyeongyeol Park and Keeman Kim, “Status of Nb3Sn strand development in Korea,” Cryogenics, 48, 347 (2008) https://doi.org/10.1016/j.cryogenics.2008.04.010
- S. Oh, et al., “A Variable Temperature Walters Spiral Probe for the Critical Current Measurement of Superconducting Strands,” IEEE Trans. on Applied Superconductivity. 18, 1063 (2008) https://doi.org/10.1109/TASC.2008.921254
- S. Oh, et al., “Field dependence of the n-value and its relation with the critical current of Nb3Sn strands,” Superconductor Science and Technology, 20, 851 (2007) https://doi.org/10.1088/0953-2048/20/8/022
- S. Oh, et al., “A Study on the Temperature Dependence of the Ginzburg-Landau Parameter, Thermodynamic and Upper Critical Field of Nb3Sn Strands,” IEEE Trans. on Applied Superconductivity, 17, 2635 (2007) https://doi.org/10.1109/TASC.2007.899368
- Sangjun Oh and Keeman Kim, “A Scaling Law for the critical current of Nb3Sn Stands Based on Strong Coupling Theory of Superconductivity,” Journal of Applied Physics, 99, 033909 (2006). https://doi.org/10.1063/1.2170415
- Sangjun Oh and Keeman Kim, “A Consistent Description of Scaling Law for Flux Pinning in Nb3Sn Strands Based on the Kramer Model,” IEEE Trans. on Applied Superconductivity, 16, 1216 (2006) https://doi.org/10.1109/TASC.2006.871303
- Byung-Hoon Oh, Doo-Hee chang, Seung Ho Jeong, Kwang- Won Lee, Sang-Ryul In, Byung-Joo Yoon, Min-Seok Seo, Jung-Tae Jin, Bum-Ryul Kim, Dae-Sik Chang, “Long pulse beam extraction with a prototype ion source for the KSTAR neutral beam system,” Rev. Sci. Instrum. 79, 1140 (2008) https://doi.org/10.1063/1.2802590
- Doo-Hee Chang, Seung-Ho Jeong, Byung-Hoon Oh, Kwang-Won Lee, and Chang-Seog Seo, “Arc discharge efficiency of a multi-megawatt long pulse ion source for the KSTAR neutral beam injector,” Plasma Sources Sci. and Technol. 14, 336 (2005) https://doi.org/10.1088/0963-0252/14/2/016
-
B.H. Oh, K.W. Lee, S.H. Jeong, I.H. Song, H.S. Shin, C.H. Choi, “Development of an Acceleration Power Supply for the KSTAR Tokamak”,
$3^{rd}$ IAEA Technical Committee Meeting on Steady-State Operation of Magnetic Fusion Devices, Greifswald, Germany, 2002 - S.R. In, B.J. Yoon, B.Y. Kim and T.S. Kim, “Ion beam optics in the bending magnet of the KSTAR NBI system,” J. Korean Phys. Soc. 49, S320 (2006)
- S.R. In, H.J. Shim, “Neutral beam evolution in the KSTAR NBI test stand”, J. Kor. Vac. Sci. Technol. 7, 27 (2003)
- Tae-Seong Kim, Jinchoon Kim, Sang Ryul In, Seung Ho Jeong, “Calculation of extracted ion beam particle distribution including within-extractor collisions from Halpha Doppler shift measurements”, Rev. Sci. Instrum. 79, 704 (2008) https://doi.org/10.1063/1.2816921
- Y. D. Bae et al., “Development of a KSTAR ICRF antenna for long pulse operation,” Nucl. Fusion, 43, 805(2003) https://doi.org/10.1088/0029-5515/43/9/302
- J. G. Kwak et al., 'Progress in the development of heating systems towards long pulse operation for KSTAR,' Nucl. Fusion, 47, 463(2007) https://doi.org/10.1088/0029-5515/47/5/011
- J.G. Kwak et al., “Achievement of 1.9 MW for 300s during the commissioning of the KSTAR ICRF transmitter,” Fusion Eng. Des., (2009) to be published https://doi.org/10.1016/j.fusengdes.2008.11.012
- Y. S. Bae et al., “KSTAR ECH system; status and plan,” Fusion Sci. Tech. 52, 321 (2007) https://doi.org/10.13182/FST07-A1510
- Y. S. Bae et al., “ECH pre-ionization and assisted startup in the fully superconducting KSTAR tokamak using second harmonic,” Nucl. Fusion, 49, 022001 (2009) https://doi.org/10.1088/0029-5515/49/2/022001
- ITER Physics Expert Group on Energetic Particles, Heating and Current Drive, “Chapter 6: Plasma auxiliary heating and current drive,” Nucl. Fusion 39, 2495 (1999) https://doi.org/10.1088/0029-5515/39/12/306
- M. Kwon, I. S. Choi, J. W. Choi, J. S. Hong, M. C. Keum, et al, “The control system of KSTAR,” Fusion Eng. Des., 71, 17 (2004) https://doi.org/10.1016/j.fusengdes.2004.04.004
- M.K. Park, et al., “Overview of KSTAR integrated control system,” Nucl. Eng. Technol., 40, 451 (2008) https://doi.org/10.5516/NET.2008.40.6.451
- S. H. Hahn, et al., “Plasma control system for “Day-one” operation of KSTAR tokamak,” Fusion Eng.Des., doi:10.1016/j.fusengdes.2008.12.082 (2009)
- Y. K. Oh, et al., “Commissioning and initial operation of KSTAR superconducting tokamak,” Fusion Eng. Des., doi:10.1016/j.fusengdes.2008.12.099 (2009)
- A.J.H. Donne, et. al., “Progress in the ITER Physics Basis: Chapter 7: Diagnostics,” Nucl. Fusion 47, 337 (2007) https://doi.org/10.1088/0029-5515/47/4/012
- S.I. Pak, H.G. Lee, K.J. Jung, C.I. Walker, D.G. Kim, and K.S. Choi, “A conceptual design of the ITER upper port plug structure,” Fusion Eng. Des., 83, 1594 (2008) https://doi.org/10.1016/j.fusengdes.2008.07.012
- M.S. Cheon, S. Pak, H.G. Lee, L. Bertalot, and C. Walker, “In-vessel design of ITER diagnostic neutron activation system,” Rev. Sci. Instrum. 79, 10E505 (2008) https://doi.org/10.1063/1.2990857
- E. Bertolini, P.L. Mondino, P. Noll, “The JET magnet power supplies and plasma control systems,” Fusion Technol. 11, 71 (1987) https://doi.org/10.13182/FST87-A25001
- ITER Final Design Report, July 2001
- H. Smolleck, et al., “Effects of pulsed-power loads upon an electric power grid,” IEEE Trans. Power Del. 6, 1305 (1991) https://doi.org/10.1109/61.97702
- P. Bettini, A. De Lorenzi, “400 kV-network harmonic impedance evaluation from harmonic distortion measurements,” ETEP, 8, 31 (1998) https://doi.org/10.1002/etep.4450080106
- H. Akagi, “Large static converters for industry and utility applications,” Proc. IEEE 89, 976 (2001) https://doi.org/10.1109/5.931498
- G. Rostagni , “The electric power handling from present machines to fusion power stations,” Fusion Eng. Des., 74, 87 (2005) https://doi.org/10.1016/j.fusengdes.2005.09.003
-
J. H. Choi, “Overview of the superconducting magnet power supply system for the KSTAR
$1^{st}$ Plasma experiment,” Nucl. Eng.Technol., 40, 459 (2008) https://doi.org/10.5516/NET.2008.40.6.459 - B.G. Hong et al., “Tokamak Reactor System Analysis Code for the Conceptual Development of DEMO Reactor,” Nucl. Eng. Technol..40, 1 (2008) https://doi.org/10.5516/NET.2008.40.1.087
- B.G. Hong, D.W. Lee, S.K. Kim, Y. Kim, “Development of a tokamak reactor system code and its application for concept development of a demo reactor,” Fusion Eng. Des., 83, 1615(2008) https://doi.org/10.1016/j.fusengdes.2008.07.037
- Y. Kim, B.G. Hong, C.H. Kim, “A neutronic investigation of He-cooled liquid Li-breeder blankets for fusion power reactor,” Fusion Eng. Des., 75-79, 1067(2005) https://doi.org/10.1016/j.fusengdes.2005.06.005
- Duck-Hoi Kim, et. al., “Current status on the detailed design and development of fabrication techniques for the ITER blanket shield block in Korea,” Fusion Eng. Des., 83, 1181 (2008) https://doi.org/10.1016/j.fusengdes.2008.08.006
- Duck Hoi KIM, et. al., “Welding technology development for the fabrication of ITER blanket shield block in KO,” Proc. Of the 18th Topical Meeting on the Technology of Fusion Energy, Sep. 2008
- Seungyon Cho, et. al., “Current status of design and analysis of Korean Helium-Cooled Solid Breeder Test Blanket Module,” Fusion Eng. Des., 83, 1163 (2008) https://doi.org/10.1016/j.fusengdes.2008.05.037
- Mu-Young Ahn, et. al., “Preliminary safety analysis of Korea Helium Cooled Solid Breeder Test Blanket Module,” Fusion Eng. Des., 83, 1753 (2008) https://doi.org/10.1016/j.fusengdes.2008.06.059
- Sunghwan Yun, et. al., “Depletion analysis of a solid-type blanket design for ITER,” Fusion Eng. Des., 83, 1654 (2008) https://doi.org/10.1016/j.fusengdes.2008.07.002
- D. W. Lee et. al., “Current status and R&D plan on ITER TBMs of Korea,” J. Korean Phys. Soc., 49, S340 (2006)
- S.J. Zinkle, M. Victoria, K. Abe, “Scientific and engineering advances from fusion materials R&D,” J. Nucl. Mater. 307-311, 31 (2002) https://doi.org/10.1016/S0022-3115(02)01088-7
- E.E. Bloom, J.T. Busby, C.E. Duty, P.J. Maziasz, T.E. McGreevy, B.E. Nelson, B.A. Pint, P.F. Tortorelli, S.J. Zinkle, “Critical questions in materials science and engineering for successful development of fusion power,” J. Nucl. Mater. 367-370, 1 (2007) https://doi.org/10.1016/j.jnucmat.2007.02.007
- W.S. Ryu, et al., “Characterization and Improvement of Nuclear Materials,” KAERI/RR-2793/2006 (2006)
- W.-J. Kim, S.M. Kang, J.Y. Park, W.S. Ryu, “Effect of SiC whisker formation on the densification of Tyranno SA/SiC composites fabricated by CVI process,” Fusion Eng. Des., 81, 931-936 (2006) https://doi.org/10.1016/j.fusengdes.2005.07.013
- J.Y. Park, S.M. Kang, W.J. Kim and A. Kohyama, “Characterization of MeV ion-irradiated SiCf/SiC composites prepared with different methods,” Advanced Mater. Res. 59, 257 (2009) https://doi.org/10.4028/www.scientific.net/AMR.59.257
- J.I. Kim, W.J. Kim, D.J. Choi, J.Y. Park, W.S. Ryu “Design of a C/SiC functionally graded coating for the oxidation protection of C/C composites,” Carbon, 43, 1749 (2005) https://doi.org/10.1016/j.carbon.2005.02.025
-
J.Y. Park, C.H. Jung, H.K. Park, S.J. Oh, and Y.S. Kim, “Preparation of
$Li_{2}ZrO_{3}$ Powders by the Combustion Process,” Ceram. Trans., 85, 55 (1997) - C.H. Jung, J.Y. Park, W.J. Kim, W.S. Ryu and S.J. Lee, “Characterizations of Li2TiO3 prepared by a solution combustion synthesis and fabrication of spherical particles by dry-rolling granulation process,” Fusion Eng. Des. 81, 1039 (2006) https://doi.org/10.1016/j.fusengdes.2005.08.085
- M.H. Lee, C.-H. Jung and S.J. Lee, “Highly sinterable lithium titanate powders fabricated by an organic-inorganic solution route,” Solid State Phen., 807, 124 (2007) https://doi.org/10.4028/www.scientific.net/SSP.124-126.807
- J.-Y. Park, “Fabrication and destructive tests of ITER first wall qualification mock-ups,” presentation in Korea-Japan Blanket Workshop, Feb. 26-27, 2009, Seoul, Korea
- H.K. Seok, K.H. Jung, Y.C. Kim, J.H. Shim, D.I. Kim, S.H. Han, K.H. Baik, P.R. Cha, “Evaluation of W-Si-C thick coating as a plasma facing material,” Accepted in J. Nucl. Materials https://doi.org/10.1016/j.jnucmat.2008.12.247
- G.-G. Lee, J.H. Kwon and C.S. Shin, "An Overview of multi-scale modeling approach to radiation effects on materials," presentation in Korea-Japan Blanket Workshop, Feb. 26-27, 2009, Seoul, Korea
- N.Y. Park, Y.C. Kim, H.K. Seok, S.H. Han, S. Cho, P.R. Cha, “Molecular dynamics simulation of irradiation damage in tungsten,” Nucl. Instru. Meth. Phys. Res. B 265, 547 (2007) https://doi.org/10.1016/j.nimb.2007.10.003
- R. Coppola, M. Magnami, R. May and A. Moeslang, “He bubble growth in a martensitic steel for fusion reactors”, J. Appl. Cryst., 33, 469-472 (2000) https://doi.org/10.1107/S0021889899014855
- B.N. Kolbasov, “Safety aspects of fusion power plants,” Nucl. Fusion 47, editorial (2007) https://doi.org/10.1088/0029-5515/47/7/E01
-
J.Ph. Girard, et. al., “Summary of the
$8^{th}$ IAEA technical meeting on fusion power plant safety,” Nucl. Fusion, 48, Conference Report, 1(2008) https://doi.org/10.1088/0029-5515/48/1/015008 - J.-Ph. Girard, et. al., “ITER, safety and licensing,” Fusion Eng. Des., 82, 506 (2008) https://doi.org/10.1016/j.fusengdes.2007.03.017
- Nuclear Technology Roadmap (NuTRM) - Vision E, Korea Nuclear Society (2005)
- Fusion Development Roadmap 2007-2036, Ministry of Education, Science and Technology (2007)
피인용 문헌
- Coating as a Corrosion Barrier of Ferritic-Martensitic Steel in Pb-Li Melt vol.64, pp.2, 2013, https://doi.org/10.13182/FST12-497
- Fusion Licensing and Safety Studies in Korea vol.42, pp.3, 2014, https://doi.org/10.1109/TPS.2013.2288789
- Fusion energy development status in Korea vol.42, pp.1, 2017, https://doi.org/10.1002/er.3799