초록
히스테리시스 전류 제어방식은 원리와 구조가 간단하여 널리 사용되었으나, 전류 오차 허용 밴드폭이 너무 작거나, 전원 전압이 상대적으로 너무 큰 경우 등에는 스위칭 주파수가 급격히 증가하여 많은 열을 발생할 수 있는 등의 단점이 있었다. 이에 본 연구에서는 단상 전류제어에서 0 모드를 추가하고, 기준 전류의 기울기를 비교하여 히스테리시스 전류 제어를 수행함으로써 대폭적인 스위칭 주파수 감소와 안정적인 전류제어가 가능하게 하였다. 또한 이를 컴퓨터 시뮬레이션을 통해 그 타당성을 확인하였다.
Hysteresis current regulator has been used widely because of its simple principle and structure. However, when the current band width is too narrow or the applied voltage is relatively too high, the switching frequency increases abruptly and it makes large amount of heat. In this study, for single phase current control, the hysteresis current control is executed by adding 0 mode state and comparing the slope of the current reference, which decreases the switching frequency so much and make the current control much stable. These were proved with computer simulations.