References
- N. Fukuda and M. Shimizu, 'The Production of Cold Rolled Steel Sheet of Extra Deep Drawing Quality by Continuous Annealing Process,' ISIJ, Vol.61, No.6, pp.43-53, 1975
- B.Y. Lee, S.H. Lee, H.K. Ahn and O.Y. Lee, 'Effect of Phosphorus Addition on the Formation of Texture of Ti(Nb) Stabilized IF Steel,' J. of the Korean Inst. of Met. & Mater., Vol.32, No.7, pp.802-809, 1994
- W. C. Jeong, 'Manufacturing Technology of Ultra Light Steel Auto Body,' Journal of Korea Society of Automotive Engineers, Vol.23, No.4, pp.15-22, 2001
- W. C. Jeong and K. M. Cho, 'Effect of Mn on the Microstructure and Mechanical Properties of High Strength IF Steels for Automotive Body Panel,' J. Kor. Inst. Met. & Mater., Vol.37, No.6, pp.672-679, 1999
- H. Katoh, H. Takechi, N. Takahashi and M. Abe, Technology of Continuously Annealed Cold Rolled Sheet Steel, TMS-AIME, Warrendale, PA, pp.37-58, 2001
- S. Y. Kim, J. H. Kwak, J. H. Chung and K. M. Cho, 'Effects of Ti on the Formability of Ti-IF Steels,' Metals and Materials International, Vol.8, No.2, pp.155-161, 2002 https://doi.org/10.1007/BF03027012
- B.Y. Lee, O.Y. Lee and S.H. Lee, 'Effect of Phosphorus and Boron Addition on the Deep Drawing and High Strength of Ti-Stabilized Low Carbon Steel Sheet,' J. of the Korean Inst. of Met & Mater., Vol.31, No.2, pp.185-192, 1993
- O. Hashimoto, S. Satoh and T. Tanaka, 'Development of {111} Texture in Intercritical Annealing of Low Carbon Steels,' Transactions ISIJ, Vol.27, pp.746-754, 1987 https://doi.org/10.2355/isijinternational1966.27.746
- K. Sakata, S. Satoh, T. Kato and O. Hashimoto, 'Metallurgical Principles and Their Applications for Producing Extra-Low Carbon IF Steels with Deep Drawability and Bake Hardenability,' Physcical Metallurgy of IF Steels, May10-11, pp.279-288, 1994
- T. Miyoshi and O. Hashimoto, 'Effects of Ti and Mn Contents on Precipitation Behavior of Sulfides During Hot Rolling in IF Steel,' CAMP-ISIJ, Vol.5, No.3, pp.862-870, 1992
- A. Okamoto and N. Mizui, 'Texture Formation in Ultra-Low Carbon Ti-added Cold Rolled Sheet Steels,' Metallurgy of Vacuum-Degassed Steel Products, TMS-AIME, pp.161-180, 1989