대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제11권4호
  • /
  • Pages.311-317
  • /
  • 2009
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지

Ba-Ferrite계 자기연마재 거동이 연마특성에 미치는 영향

The Effects of Ba-Ferrite Magnetic Abrasive Behavior on Polishing Characteristics

  • Yun, Yeo-Kwon (Dept. of Mechanical Design, Yuhan University) ;
  • Kim, Hee-Nam (Dept. of Mechanical Engineering, Myongji University)
  • 투고 : 2009.09.18
  • 심사 : 2009.12.09
  • 발행 : 2009.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper deals with behavior of the magnetic abrasive using Ba-Ferrite on polishing characteristics in a new internal finishing of STS304 pipe applying magnetic abrasive polishing. The magnetic abrasive using Ba-Ferrite grain WA used to resin bond fabricated low temperature. And Ba-Ferrite of magnetic abrasive powder fabricated that Ba-Ferrite was crused into 200 mesh. The previous research have made an experiment in the static state the movement of magnetic abrasive grain is nevertheless in the dynamic state. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

키워드

참고문헌

  1. Takeo Shinmura and Hitomi Yamaguchi, '磁氣硏磨法による內面の平滑加工に關する硏究,' 日本機械學會論文集, 第59卷, 第560号, pp. 293-299, 1993
  2. Takeo Shinmura, Yoshitaka Hamato and Hitomi Yamaguchi, '磁氣硏磨法による內面の精密バリ取リに關する硏究(第1報),' 日本機械學會論文集, 第64卷, 第620号, pp. 312-318, 1998
  3. Masahiro Anzai, Toru Sudo and Takeo Nakagawa, '磁氣硏磨用砥粒の新製造技術とその硏磨特性,' 生産硏究, 第43卷, 第11号, pp. 13-22, 1991
  4. Hitomi Yanaguchi and Takeo Shinmura, '磁氣硏磨法 による內面の平滑加工に關する硏究(第4 報),' 日本機械學會論文集, 第61卷, 第591号, pp. 348-353, 1995
  5. Hitomi Yamaguchi, Takeo Shinmura, '內面磁氣硏法における磁性砥粒の特異な擧動と加工能率向上効果,' 機械と工具, pp. 89-93, 1999. 3
  6. Takeo Shinmura, Eiju Hatano and Koya Takazawa, '回轉磁界を利用した磁氣硏磨法とその加工裝置の開發,' 日本機械學會論文集, 第52卷, 第476号, pp. 1462-1468, 1985
  7. Takeo Shinmura, '円筒磁氣硏磨法,' 機械技術, 第44卷, 第8号, pp. 108-112, 1996
  8. Takeo Shinmura, '磁氣硏磨法の現狀と課題,' 機械と工具, 第44卷, 第9号, pp. 16-21, 1996
  9. Kazuhiro Tsuchiya, Yasuo Shimizu, Kazuhiko Sakaki and Mototaro Sato, '磁氣硏磨法における 硏磨機構,' 日本金屬學會誌, 第57卷, 第11号, pp. 1333-1338, 1993
  10. Kiyoshi Suzuki, '最近の特殊硏磨加工技術,' 機械と工具, pp. 9-12, 1998.5
  11. 進村武南, 波田野榮十, '磁氣硏磨法の硏究-回轉磁極による內面および球面の硏磨,' JSPE-52-08, '86-08-1390, pp. 108-110, 1986
  12. 김희남, 윤여권, 심재환, 'STS304 파이프 내면의 초정밀 자기연마,' 한국정밀공학회 추계학술대회논문집, pp. 947-952, 2001
  13. 김희남, 윤여권, 심재환, 'STS304 파이프 내면의 초정밀 자기연마,' 한국산업안전.위생학회 공동학술대회논문집, pp. 179-185, 2001
  14. 김희남, 윤여권, 심재환, '자기연마를 이용한 STS 304 파이프 내면의 초정밀 가공,' 한국산업안전학회지, Vol. 17, No. 3, pp. 30-35, 2002
  15. 김희남, 윤여권, 김상백, 최희성, 안효종, 'sludge를 이용한 자기 연마재 개발', 한국산업안전학회지, Vol. 19, No. 2, pp.6-10, 2004., Vol. 17, No. 3, pp.30-35, 2002
  16. 김희남, 윤여권, 김상백, 최희성, '슬러지 연마입자를 이용한 이음매 없는 스테인리스강 튜브 내면의 자기연마', 한국자동차공학회논문집, Vol. 12, No. 6, pp.151-157, 2004
  17. 김희남, 윤여권, 'Ba-Ferrite와 GC, CBN을 이용한 자기연마재 개발', 한국안전학회지, Vol. 23, No. 5, pp.43-48, 2008