References
- P. W. Schilke, Advanced Gas Turbine Materials and Coatings, GER-3569 (2004 Materials and Coatings, GER-3569 (2004)
- G. C. Chang and R. A. Miller, 'Behavior of thermal barrier coatings for advanced gas turbine blades,' Surface and Coating Technology, Vol. 30, pp. 13-28 (1987) https://doi.org/10.1016/0257-8972(87)90004-1
- W. J. Brindley and R. A. Miller, 'Thermal barrier coating life and isothermal oxidation of low-pressure plasma-sprayed bond coat alloys,' Surface and Coating Technology, Vol. 43, pp. 446-457 (1990) https://doi.org/10.1016/0257-8972(90)90096-U
- R. A. Miller and C. E. Lowell, 'Failure mechanisms of thermal barrier coatings exposed to elevated temperatures,' Thin Solid Films, Vol. 95, pp. 265-273 (1981) https://doi.org/10.1016/0040-6090(82)90019-0
- A. Bennett, 'Properties of thermal barrier coatings,' Material Science and Technology, Vol. 2, pp. 257-261 (1986) https://doi.org/10.1179/026708386790123378
- T. Tomimatsu, S. Zhu and Y. Kagawa, 'Effect of thermal exposure on stress distribution in TGO layer of EB-PVD TBC,' Acta Materialia, Vol. 51, pp. 2397-2405 (2003) https://doi.org/10.1016/S1359-6454(03)00046-6
- 정우석, 김길무, 'NiCoCrAlY Bond Coat를 사용한 Thermal Barrier Coating의 고온 안정성에 미치는 Pt의 영향', 대한금속재료학회지,Vol. 44, No. 12, pp. 806-815 (2006) https://doi.org/10.3740/MRSK.2005.15.6.375
- 이한상, 김의현, 이정혁, '대기플라즈마 용사법으로 제조된 열차폐코팅의 열피로특성 평가', 대한금속재료학회지, Vol. 46, No. 6, pp. 363-369 (2008)
- J. H. Park, J. S. Kim and K. H. Lee, 'Acoustic emission characteristics for diagnosis of TBC damaged by hightemperature thermal fatigue,' Journal of Materials Processing Technology, Vol. 187-188, pp. 537-541 (2007) https://doi.org/10.1016/j.jmatprotec.2006.11.219
- 이준현, 이진경, 조윤호, '세라믹의 열충격 손상거동 및 초음파 Lamb파를 이용한 비파괴적 손상평가', 대한기계학회논문집 A권, 제22권, 제12호, pp. 2278-2285 (1998)
- V. Teixeira, M. Andritschky, W. Fischer, H. P. Buchkremer and D. Stover, 'Effects of deposition temperature and thermal cycling on residual stress state in zirconia-based thermal barrier coatings,' Surface and Coatings Technology, Vol. 120-121, pp. 103-111 (1999) https://doi.org/10.1016/S0257-8972(99)00341-2
- 장중철, 최성철, 'Thermally Grown Oxide의 고온 크리프에 따른 열차폐 코팅의 잔류응력분포에 관한 유한요소해석', 한국세라믹학회지, Vol. 43, No. 8, pp. 479-485 (2006) https://doi.org/10.4191/KCERS.2006.43.8.479
- 이길승, 김태옥, 김화영, 안중환, '와전류 센서를 이용한 금속 모재 선별에 관한 연구', 한국정밀공학회 학술발표대회 논문집, pp. 1788-1792 (2005)
- 정태언, 장기옥, 박대영, '와전류(渦電流) 표준침투(標準浸透) 깊이 표피효과(表皮效果)와 결함신호(缺陷信號) 위상각(位相角)의 관계해석(關係解析)', 비파괴검사학회지, Vol. 4, No. 2, pp. 7-14 (1985)
- 황춘욱, 조희동, 박영민, 김순철, 이성식, '열교환기 세관의 확관부 Mock-Up 시편에 대한 와전류 신호 분석', 한국비파괴검사학회 추계학술발표회 논문집, pp. 293-298 (2001)
- 정현규, 이윤상, 정용무, 허형, 심철무, 양동주, '지르코늄 이중관의 Gap 측정을 위한 원거리장 와전류 기술', 한국비파괴검사학회 춘계학술대회 논문집, pp. 134-138 (2002)
- 박병철, 안연식, 정계조, 박상기, 조용상, 길두송, '가스터빈 동익의 와전류검사', 한국비파괴검사학회 제7차 극동지역비파괴검사학술대회 및 춘계학술대회, pp. 291-296 (2006)