참고문헌
- C.W. Stewart, C.L. Wheeler, R.J. Cena, C.A. McMonagle, J.M. Cuta, and D.S. Trent “COBRA-IV: The Model and The Method,” BNWL-2214, PNL (1977)
- J.E. Kelly, S.P. Kao, and M.S. Kazimi, “THERMIT-2: A Two-Fluid Model for Light Water Reactor Subchannel Transient Analysis,” MIT-EL 81-014, MIT (1981)
- Y.J. Yoo, D.H. Hwang, and D.S. Sohn, “Development of A Subchannel Analysis Code MATRA Applicable to PWRs and ALWRs,” J. Korean Nuclear Society, 31, 314 (1999)
- D.H. Hwang, S.Y. Chun, K.K. Kim, and C.C. Lee, “Mass Velocity and Cold-wall Effects on Critical Heat Flux in an Advanced Light Water Reactor,” Nucl. Eng. Design, 237, 369 (2007) https://doi.org/10.1016/j.nucengdes.2006.04.034
- X. Cheng and D.H. Hwang, “Subchannel analysis of LBEcooled fuel assemblies of Accelerator Driven Systems,” Proceedings of GLOBAL 2005, Paper 115, Tsukuba, Japan, 2005
- K.H. Han, K.W. Seo, D.H. Hwang, and S.H. Chang, “Development of a Thermal Hydraulic Analysis Code for Gas-cooled Reactors with Annular Fuels,” Nucl. Eng. Design, 236, 164 (2006) https://doi.org/10.1016/j.nucengdes.2005.07.006
- D.H. Hwang, K.W. Seo, and H. Kwon, “Assessment of Critical Heat Flux Data Base for Rod Bundles,” Proceeding of KNS Spring Meeting, Kyeongju, Korea, 2008
- J.J. Jeong, K.S. Ha, B.D.Chung, and W.J. Lee, “Development of A Multi-dimensional Thermal-Hydraulic System Code, MARS 1.3.1,” Annals of Nuclear Energy, 26, 1611 (1999) https://doi.org/10.1016/S0306-4549(99)00039-0
- M.J. Thurgood, J.M. Kelly, T.E. Guidotti, R.J. Kohrt, and K.R. Crowell, “COBRA/TRAC - A Thermal-Hydraulic Code for Transient Analysis of Nuclear Reactor Vessels and Primary Coolant Systems,” NUREG-CR-3046, U.S. Nuclear Regulatory Commission (1983)
- J.J. Jeong, D.H. Hwang, and B.D. Chung, “Improvement of the Subchannel Flow Mixing Model of the MARS Code,” Nuclear Technology, 156, 360 (2006) https://doi.org/10.13182/NT06-A3797
- H. Herkenrath, W. Hufschmidt, U. Jung, and F. Weckermann, Experimental Investigation of The Enthalpy and Mass Flow Distribution in 16-Rod Clusters with BWR-PWRGeometries and Conditions, EUR 7575 EN, ISPRA (1981)
- R.T. Lahey, Jr., B.S. Shiralkar, and D.W. Radcliffe, Two- Phase Flow and Heat Transfer in Multi-rod Geometries: Subchannel and Pressure Drop Measurements in a Nine- Rod Bundle for Diabatic and Adiabatic Conditions, GEAP- 13049, GE (1970)
- A. Tapucu, M. Geckinli, N. Troche, and R. Girard, “Experimental Investigation of Mass Exchanges Between Two Laterally Interconnected Two-Phase Flows,” Nucl. Eng. Design, 105, 295 (1998) https://doi.org/10.1016/0029-5493(88)90251-8
- B. Neykov, F. Aydogan, L. Hochreiter, K. Ivanov, H. Utsuno, K. Fumio, E. Sartori, and M. Martin, NUPEC BWR Full-Size Fine-Mesh Bundle Test Benchmark, Volume I. Specifications, NEA/NSC/DOC(2005)5, OECD Nuclear Energy Agency (2005)
- R.T. Lahey, Jr., and F.J. Moody, The Thermal Hydraulics of a Boiling Water Reactor, 2nd Ed., ANS, La Grange Park, Illinois USA, p. 122 (1977)
- J.J. Jeong, W.J. Lee, and B.D. Chung, “Simulation of A Main Steam Line Break Accident Using A Coupled ‘System Thermal-Hydraulics, Three-dimensional Reactor Kinetics, and Hot Channel’ Analysis Code,” Annals of Nuclear Energy, 33, 820 (2006) https://doi.org/10.1016/j.anucene.2006.04.008
- J.M. Gonzalez-Santalo and P. Griffith, “Two-phase flow Mixing in Rod Bundle Subchannels,” ASME Paper 72- WA/NE-19 (1972)
- D.H. Hwang, Y.J. Yoo, W.K. In, and S.Q. Zee, “Assessment of the Interchannel Mixing Model with a Subchannel Analysis Code for BWR and PWR Conditions,” Nucl. Eng. Design, 199, 257 (2000) https://doi.org/10.1016/S0029-5493(00)00234-X
- J.E. Kelly, Development of a Two-Fluid, Two-Phase Model for Light Water Reactor Subchannel Analysis, PhD Thesis, Department of Nuclear Engineering, MIT (1980)
- S.G. Beus, A Two-phase Turbulent Mixing Model for Flow in Rod Bundles, Westinghouse Report, Bettis Atomic Power Laboratory, WAPD-T-2438 (1971)