References
- US 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," (1997).
- IAEA Safety Standard Series No. TS-R-1, "Regulations for the Safe Transport of Radioactive Material," (2005).
- H.A. Nelms, "Structural Analysis of Shipping Casks - Effects of Jacket Physical Properties and Curvature on Puncture Resistance," Oak Ridge National Laboratory Report, ORNL/TM-1312, Vol. 3(1968).
- R.C. Shieh, "Empirical Equations for Puncture Analysis of Lead-Shielded Spent Fuel Shipping Casks," Proc. of the 5th Int. Symp. on the Packaging and Transportation of Radioactive Materials, Vol. 2, pp. 341-350, Las Vegas(1978).
- R.S.J. Corran, P.J. Shadbolt and C. Ruiz, "Impact Loading of Plates-An Experimental Investigation," International Journal of Impact Engineering, Vol. 1, pp. 3-22 (1983). https://doi.org/10.1016/0734-743X(83)90010-6
- A.I.O Zaid, A. El-Kalay and F.W. Travis, "An Examination of the Perforation of a Mild Steel Plate by a Flat-Ended Cylindrical Projectile," International Journal of Mechanical Science, Vol. 15, pp. 129-143 (1973). https://doi.org/10.1016/0020-7403(73)90061-1
- N. Jones and S.B. Kim, "A Study on the Large Ductile Deformations and Perforation of Mild Steel Plates Struck by a Mass-Part II: Discussion," Journal of Pressure Vessel Technology, Vol. 119, pp. 185-191 (1997). https://doi.org/10.1115/1.2842282
- E.T. Onat and R.M. Haythornthwaite, "The Load-carrying Capacity of Circular Plates at Large Deflection," Trans. of ASME, Journal of Applied Mechanics, Vol. 23, pp. 49-55 (1956).
- K. Asada, M. Yamamoto, M. Ohashi, S. Hode and A. Higashino, "Development of Simplified Analysis Code for 9-m drop and 1-m Puncture Tests for a Radioactive Material Transport Cask," Waste Management' 88, pp. 135-144, Tuscon (1988).
- H.M. Wen and N. Jones, "Low-velocity Perforation of Punch-impact-loaded Metal Plates," Journal of Pressure Vessel Technology, Vol. 118, pp. 181-187(1996). https://doi.org/10.1115/1.2842178
- T.R. Bump and Y.Y. Liu, "A Simplified Analysis of the Regulatory Puncture Test," PATRAM '95, pp. 407-414, Las Vegas (1995).
- J. Altes, H. Geiser, W. Volzer, A. Frenk and G. Deeken, "Finite Element Analysis for the Impact Behaviour of a Cask Interacting with a Rigid Pin," Proc. of the 12th Int. Conf. on Structural Mechanics in Reactor Technology, pp. 77-82, Stuttgart (1993).
- Y.S. Lee, C.H. Ryu, H.S. Kim and Y.J. Choi, "A Study on the Free Drop Impact of a Cask Using Commercial FEA Codes," Nuclear Engineering and Design, Vol. 235, pp. 2219-2226 (2005). https://doi.org/10.1016/j.nucengdes.2005.03.009
- T.Y. Lo, "Puncture Evaluation of Shippingport Package," Proc. of the 9th Int. Symp. on the Packaging and Transportation of Radioactive Materials, Vol. 3, pp. 1451-1459, Washington (1989).
- 정성환, 김덕희, 정진세, 양계형, 이흥영, "HIC 운반용기의 사고조건에 대한 구조평가," 방사성폐기물학회지, Vol. 3, pp. 231-236 (2005).
- 이민수, 백승우, 김광락, 안도희, 임성팔, 정홍석, 최희주, 최종원, 손순환, 송규민, "B형 삼중수소 운반용기 안전성 평가," 방사성폐기물학회지, Vol. 5, pp. 199-212 (2007).
- LS-DYNA Keyword User's Manual, Livermore Software Technology Corporation, (2005).