참고문헌
- K. H. Hong, K. H. Kim, S. C. Yang, H. S. Kim, S. G. Lee, M. H. Kook, M. G. Bok, H. T. Kim, H. L. Yang, M. S. Kim, J. H. Won, 2007, A study on characteristics of surface roughness of oxygem-free copper by Development of micromachine, Proceedings of the Kspe Spring Conference 2007
- J. W. Jung, J. G. Kim, T. J. Ko, H. S. Kim, J. K. Park, 2004, Reasearch on the machinability in Micro Machining, Proceedings of the Ksmte Spring Conference 2004, pp. 99-104
- G. D. Kim, B. G. Loh, 2007, Elliptical Vibration Cutting with Variable Trajectory for Ultra-precision Micro-Machining, Korean society for Precision Engineering, Vol. 24, No.11, pp. 52-58
- A. B. M. A. Asad, Takeshi Masaki, M. Rahman, H. S. Lim, Y. S. Wong, 2007, Tool-based micromachining, Journal of Materials Processing Technology, Vol.192- 193, pp. 204-211 https://doi.org/10.1016/j.jmatprotec.2007.04.038
- Eckart Uhlmann, Sascha Piltz and Kai Schauer, 2005, Micro milling of sintered tungsten-copper composite materials, Journal of Materials Processing Technology, Vol. 167, pp. 402-407 https://doi.org/10.1016/j.jmatprotec.2005.05.022
- C. S. Kim, S. S. Oh, Y. H. Lim, 1994, A Study on the Cutting Characteristics of SCM440, SNCM21, STS 304 in Cryogenic Cutting, Korean society for Precision Engineering, Vol. 11, No. 1, pp. 44-53
- Yakup Yildiz and Muammer Nalbant, 2008, A review of cryogenic cooling in machining processes, International Journal of Machine Tools & Manufacture, Vol.48, pp. 947-964 https://doi.org/10.1016/j.ijmachtools.2008.01.008
- Shane Y. Hong, Yucheng Ding, 2001, Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V, International Journal of Machine Tools & Manufacture, Vol. 41, pp. 1417-1437 https://doi.org/10.1016/S0890-6955(01)00026-8
- K. A. Venugopal, S. Paul, A. B. Chattopadhyay, 2007, Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling, Wear, Vol. 262, pp. 1071-1078 https://doi.org/10.1016/j.wear.2006.11.010
- J. Chae, S. S. Park, T. Freiheit, 2006, Investigation of micro-cutting operations, International Journal of Machine Tools & Manufacture, Vol. 46, pp. 313-332 https://doi.org/10.1016/j.ijmachtools.2005.05.015
- D. Cox, G. Newby, H. W. Park, S. Y. Liang, 2004, Performance evaluation of a miniaturized machining center for precision manufacturing, Proceedings ASME International Mechanical Engineering Congress and Exposition, pp. 13-20
- G.H. Kim, K. P. Hong, Y. M. Heo, G. S. Yoon, T. I. Seo, M. W.Cho, 2008, Development of a Micro Tool inspection and Verification System, International Conference on Mechanical & Manufacturing Engineering 2008
- O. K. Kwon, H. T. Jeong, J. H. Yun, K. Park, 2007, A Study on Rapid Mold Heating System using High-Frequency Induction Heating, Transactions of the KSMEA, Vol. 31, No.5, pp. 594-600 https://doi.org/10.3795/KSME-A.2007.31.5.594
피인용 문헌
- Fabrication of LGP Micro-Channels by Micro End-Milling and MR Fluid Jet Polishing vol.22, pp.2, 2013, https://doi.org/10.5228/KSTP.2013.22.2.80