DOI QR코드

DOI QR Code

엔진 밸브 자기 구동기의 설계 최적화

Design Optimization for the Magnetic Engine Valve Actuator

  • 소현준 (연세대학교 기계공학과 대학원) ;
  • 박순옥 (연세대학교 기계공학과 대학원) ;
  • 유정훈 (연세대학교 기계공학부)
  • 발행 : 2009.06.01

초록

As the automobile energy efficiency stands out an important matter of interest, the magnetic engine valve system receives attention. It has an advantage of no engine power leakage in opening and closing the valve. Moreover, it generates much bigger force than the piezo actuator system, so it can be a good alternative system of the cam and camshaft system. However, since the valve system is not light enough, it is necessary to make its weight reduce. In this study, topology optimization is applied to find the optimal shape of the armature in a magnetic valve system combined with the finite element analysis for the magnetic field analysis. The result is used to obtain a concept design. The adjoint variable method is employed in order to calculate the design sensitivity of the magnetic driving force in the armature component mostly to reduce the computational time during the repeated sensitivity calculation. The sequential linear programming is employed for the optimization algorithm.

키워드

참고문헌

  1. Park, S. H., 2003, Study on Design and Operating Parameters of Electromechanical Valve System, Ph D Thesis, Ajou University
  2. http://www.global-autonews.com/board/view.php3?table=bd_chae_war&gubun=7&page_num=&idx=1707&keyfield=&key
  3. Kim, J. and Lieu, D. K., 2007, 'A New Electromagnetic Engine Valve Actuator with Less Energy Consumption for Variable Valve Timing,' Journal of Mechanical Science and Technology, Vol. 21, pp. 602-606 https://doi.org/10.1007/BF03026964
  4. Bendsoe, M. P. and Kikuchi, N., 1988, 'Generating Optimal Topologies in Structural Design Using a Homogenization Method,' Computer methods in applied Mechanics and Engineering, Vol. 71, pp. 197-224 https://doi.org/10.1016/0045-7825(88)90086-2
  5. Bendsoe, M. P. and Sigmund O., 2003, Topology Optimization Theory, Methods and Applications. Springer-Verlag: New York
  6. Dick, D. N. and Lowther, D. A., 1997, 'Composite Microstructure of Permeable Material for the Optimized Material Distribution Method of Automated Design,' IEEE Transactions on Magnetics, Vol. 33, Issue 2, pp. 1828-1831 https://doi.org/10.1109/20.582634
  7. Yoo, J. and Soh, H. J., 2005, 'An Optimal Design of Magnetic Actuators Using Topology Optimization and the Response Surface Method,' Microsystem Technologies, Vol. 11, pp. 1252-1261 https://doi.org/10.1007/s00542-005-0610-9
  8. Haftka, R. T. and Gurdal, Z., 1992, Elements of Structural Optimization, Kluwer Academic, Dordrech
  9. Yoo, J., Yang. S., and Choi, J. S., 2008, 'Optimal Design of an Electromagnetic Coupler to Maximize Force to a Specific Direction,' IEEE Transactions on Magnetics, Vol. 44, Issue 7, pp. 1737-1742 https://doi.org/10.1109/TMAG.2008.922183
  10. Haug, E. J., Choi, K. K. and Komkov, V., 1986, Design Sensitivity Analysis of Structural Systems, Academic Press, New York