Geomechanics and Engineering

  • 제1권1호
  • /
  • Pages.1-15
  • /
  • 2009
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effects of fines content on void ratio, compressibility, and static liquefaction of silty sand

  • Lade, Poul V. (Department of Civil Engineering, The Catholic University of America) ;
  • Yamamuro, Jerry A. (School of Civil and Construction Engineering, Oregon State University) ;
  • Liggio, Carl D. Jr. (Pharos Enterprise Intelligence, LLC)
  • 투고 : 2009.02.12
  • 심사 : 2009.03.05
  • 발행 : 2009.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Many aspects of the behavior of sands are affected by the content of non-plastic fine particles and these various aspects should be included in a constitutive model for the soil behavior. The fines content affects maximum and minimum void ratios, compressibility, shear strength, and static liquefaction under undrained conditions. Twenty-eight undrained triaxial compression tests were performed on mixtures of sand and fine particles with fines contents of 0, 10, 20, 30, 50, 75, and 100% to study the effects of fines on void ratio, compressibility, and the occurrence of static liquefaction. The experiments were performed at low consolidation pressures at which liquefaction may occur in near-surface, natural deposits. The presence of fines creates a particle structure in the soil that is highly compressible, enhancing the potential for liquefaction, and the fines also alter the basic stress-strain and volume change behavior, which should be modeled to predict the occurrence of static liquefaction in the field. The void ratio at which liquefaction occurs for each sand/fines mixture was determined, and the variation of compressibility with void ratio was determined for each mixture. This allowed a relation to be determined between fines content, void ratio, compressibility, and the occurrence of static liquefaction. Such relations may vary from sand to sand, but the present results are believed to indicate the trend in such relations.

키워드

참고문헌

  1. Fahey, M. and Randolph, M.F. (1984), "Effect of disturbance on parameters derived from self-boring pressuremeter in sand", Geotechnique, 34(1), 81-97. https://doi.org/10.1680/geot.1984.34.1.81
  2. Felio, G.Y. and Briaud, J.L. (1986), "Conventional parameters from pressuremeter test data: Review of existing methods", The Pressuremeter and Its Applications, Second International Symposium, ASTM STP 950, American Society for Testing and Materials, Philadelphia, 265-282.
  3. Hughes, J.M.O., Wroth, C.P. and Windle, D. (1977), "Pressuremeter Tests in Sand", Geotechnique, 27(4), 455- 477. https://doi.org/10.1680/geot.1977.27.4.455
  4. Janbu, N. and Senneset, K. (1973), "Field compressometer − principles and applications", Proceedings of the Eighth international Conference on Soil Mechanics and Foundation Engineering, Moscow, 1.1, 191-198.
  5. Lade, P.V. (1992), "Static instability and liquefaction of loose fine sandy slopes", J. Geotech. Eng., ASCE, 118(1), 51-71. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:1(51)
  6. Lade, P.V. (1993), "Initiation of static instability in the submarine Nerlerk berm", Can. Geotech. J., 30(5), 895-904. https://doi.org/10.1139/t93-088
  7. Lade, P.V. (1994a), "Creep effects on static and cyclic instability of granular soils", J. Geotech. Eng., ASCE, 120(2), 404-419. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:2(404)
  8. Lade, P.V. (1994b), "Instability and liquefaction of granular materials", Comput. Geotech., 16, 123-151. https://doi.org/10.1016/0266-352X(94)90018-3
  9. Lade, P.V., Liggio, C.D. Jr., and Yamamuro, J.A. (1998), "Effects of non-plastic fines on minimum and maximum void ratios of sand", Geotech. Test. J., ASTM, GTJODJ, 21(4), 336-347. https://doi.org/10.1520/GTJ11373J
  10. Lade, P.V., Nelson, R.B. and Ito, Y.M. (1987), "Nonassociated flow and stability of granular materials", J. Eng. Mech., ASCE, 113(9), 1302-1328. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:9(1302)
  11. Lade, P.V., Nelson, R.B. and Ito, Y.M. (1988), "Instability of granular materials with nonassociated flow", J. Eng. Mech., ASCE, 114(12), 2173-2191. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:12(2173)
  12. Lade, P.V. and Pradel, D. (1990), "Instability and plastic flow of soils, I: Experimental observations", J. Eng. Mech., ASCE, 116(11), 2532-2550. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:11(2532)
  13. Lade, P.V. and Yamamuro, J.A. (1997), "Effects of non-plastic fines on static liquefaction of sands", Can. Geotech. J., 34(6), 918-928. https://doi.org/10.1139/t97-052
  14. Lee, K.L. and Seed, H.B. (1967), "Drained strength characteristics of sands", J. Soil Mech. Found. Division, ASCE, 93(SM6), 117-141.
  15. Rutledge, P. (1947), "Cooperative triaxial shear research program of the corps of engineers, triaxial shear research distribution studies on soils", Waterways Experiment Station, Vicksburg, Mississippi, 1-178.
  16. Schmidt, B. (1967), "Uniaxial primary compression of sands", Bulletin No. 23, The Danish geotechnical Institute, 13-26.
  17. Schmertmann, J.H. (1970), "Suggested method for screw-plate load test", Special Procedures for Testing Soils and Rock for Engineering Purposes, ASTM STP 479, 81-85.
  18. Selvadurai, A.P.S. and Nicholas, T.J. (1979), "A theoretical assessment of the screw plate test", Proceedings of the 3rd International Conference on Numerical methods in Geomechanics, Aachen, West Germany, 1245-1252.
  19. Strout, J.M. and Senneset, K. (1998a), "International development of the field compressometer", Proceedings of the First International Conference on Site Characterization, Atlanta, Georgia, 2, 857-862.
  20. Strout, J.M. and Senneset, K. (1998b), "The field compressometer test in Norway", Proceedings of the First International Conference on Site Characterization, Atlanta, Georgia, 2, 863-868.
  21. Wood, F.M., Yamamuro, J.A. and Lade, P.V. (2008), "Effect of depositional method on the undrained response of silty sand", Can. Geotech. J. (accepted).
  22. Wroth, C.P. (1975), "In Situ measurement and initial stresses and deformation characteristics", Proceedings of the Conference on In Situ Measurement and Soil Properties, ASCE, Vol. II, North Carolina, 181-230.
  23. Yamamuro, J.A. and Lade, P.V. (1997), "Static liquefaction of very loose sands", Can. Geotech. J., 34(6), 905-917. https://doi.org/10.1139/t97-057
  24. Yamamuro, J.A. and Lade, P.V. (1998), "Steady state concepts and static liquefaction of silty sands", J. Geotech. Geoenviron. Eng., ASCE, 124(9), 868-877. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:9(868)
  25. Yamamuro, J.A. and Lade, P.V. (1999), "Experiments and modelling of silty sands susceptible to static liquefaction", Mech. Cohesive-Frictional Mater., Wiley, 4(6), 545-564. https://doi.org/10.1002/(SICI)1099-1484(199911)4:6<545::AID-CFM73>3.0.CO;2-O
  26. Yamamuro, J.A., Wood, F.M. and Lade, P.V. "Effect of depositional method on the microstructure of silty sand", Can. Geotech. J. (accepted).
  27. Zlatovic, S. and Ishihara, K. (1997), "Normalized behavior of very loose non-plastic soils: Effects of fabric", Soils Found., 37(4), 47-56. https://doi.org/10.3208/sandf.37.4_47

피인용 문헌

  1. Structural stability of rubble-pile asteroids vol.223, pp.1, 2013, https://doi.org/10.1016/j.icarus.2012.11.005
  2. Modeling flow instability of an Algerian sand with the dilatancy rule in CASM vol.9, pp.6, 2015, https://doi.org/10.12989/gae.2015.9.6.729
  3. Stability of rubble-pile satellites vol.229, 2014, https://doi.org/10.1016/j.icarus.2013.09.023
  4. Seismic table investigation of the effect of inclusions on the cyclic behaviour of tailings vol.49, pp.4, 2012, https://doi.org/10.1139/t2012-009
  5. Evaluation of static liquefaction potential of silty sand slopes vol.48, pp.2, 2011, https://doi.org/10.1139/T10-063
  6. Reply to the discussion by Jefferies, Been, and Olivera on “Evaluation of static liquefaction potential of silty sand slopes” 1Appears in the Canadian Geotechnical Journal, 49(6): 746–750 [doi: 10.1139/t2012-039]. vol.49, pp.6, 2012, https://doi.org/10.1139/t2012-046
  7. Stability and Instability of Granular Materials under Imposed Volume Changes: Experiments and Predictions vol.14, pp.5, 2014, https://doi.org/10.1061/(ASCE)GM.1943-5622.0000352
  8. Structural and Micromechanical Properties of Ternary Granular Packings: Effect of Particle Size Ratio and Number Fraction of Particle Size Classes vol.13, pp.2, 2009, https://doi.org/10.3390/ma13020339
  9. Packing Density and Overconsolidation Ratio Effects on the Mechanical Response of Granular Soils vol.38, pp.1, 2020, https://doi.org/10.1007/s10706-019-01061-2
  10. Stabilization of Sand with Colloidal Nano-Silica Hydrosols vol.10, pp.15, 2009, https://doi.org/10.3390/app10155192
  11. Forewarning of Static Liquefaction Landslides vol.146, pp.9, 2009, https://doi.org/10.1061/(asce)gt.1943-5606.0002320
  12. Liquefaction Resistance of Silty Sand with Ground Rubber Additive vol.21, pp.6, 2009, https://doi.org/10.1061/(asce)gm.1943-5622.0002002
  13. Modelling the influence of fines content on the instability of silty sands considering grain scale interactions vol.143, pp.None, 2021, https://doi.org/10.1016/j.ijplas.2021.103020