Computers and Concrete

  • 제6권6호
  • /
  • Pages.437-450
  • /
  • 2009
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Influence of extreme curing conditions on compressive strength and pulse velocity of lightweight pumice concrete

  • Anwar Hossain, Khandaker M. (Department of Civil Engineering, Ryerson University)
  • 투고 : 2009.01.22
  • 심사 : 2009.09.08
  • 발행 : 2009.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The effect of six different curing conditions on compressive strength and ultrasonic pulse velocity (UPV) of volcanic pumice concrete (VPC) and normal concrete (NC) has been studied. The curing conditions include water, air, low temperature ($4^{\circ}C$) and different elevated temperatures of up to $110^{\circ}C$. The curing age varies from 3 days to 91 days. The development in the pulse velocity and the compressive strength is found to be higher in full water curing than the other curing conditions. The reduction of pulse velocity and compressive strength is more in high temperature curing conditions and also more in VPC compared to NC. Curing conditions affect the relationship between pulse velocity and compressive strength of both VPC and NC.

키워드

참고문헌

  1. ACI 213R (2003), "Guide for Structural Lightweight-Aggregate Concrete", ACI Committee 213, American Concrete Institute, Farmington Hills, Michigan, 38.
  2. Al-Sugair, F.H. (1995), "Destructive and non-destructive tests for evaluating the strength properties of concrete containing silica fume", Eds. Sakai, K., Banthis, N. and Gjorv, O.E., Concrete under severe conditions: environment and loading, 2, E & FN Spon.
  3. Basri, H.B., Mannan, M.A. and Zain, M.F.M. (1999), "Concrete using waste oil palm shells as aggregate", Cement Concrete Res., 29(4), 619-622. https://doi.org/10.1016/S0008-8846(98)00233-6
  4. Bremner, T.W., Holm, T.A. and McInerney, J.M. (1993), "Influence of Compressive Stress on the Permeability of Concrete", Special Publication, 136, 345-356.
  5. Cabrera, J.G., Rivera-Villarreal, R. and Ravindrarajah, R.S. (1997), "Properties and Durability of a Pre-Columbian Lightweight Concrete", Special Publication, 170, 1215-1230.
  6. Carmichael, J. (1986), "Pumice concrete panels", Concrete Inter., 8(11), 31-32.
  7. CSA 23.3-94 (1994), Design of Concrete structures, Canadian Standard Association, Rexdale, Ontario.
  8. Demirboga, R., Turkmen, I. and Karakoc, M.B. (2004), "Relationship between ultrasonic velocity and compressive strength for high volume mineral admixtured concrete", Cement Concrete Res., 34(12), 2329-2336. https://doi.org/10.1016/j.cemconres.2004.04.017
  9. DiFrancesco, C.A., Bolen, W.P., Founie, A. and Crangle, R.D. (2008), Pumice and Pumicite, U.S. Geological Survey Minerals Year Book-140 series.
  10. FIP (1983), FIP Manual of Lightweight Aggregate Concrete, 2nd Edition, London, Surrey University Press, 4.
  11. Ghavami, K. (1995), "Ultimate load behaviour of bamboo-reinforced lightweight concrete beams", Cement Concrete Comp., 17(4), 281-288. https://doi.org/10.1016/0958-9465(95)00018-8
  12. Glenn, G.M., Gray, G.M., Orts, W.J. and Wood, D.W. (1999), "Starch-based lightweight concrete: effect of starch source, processing method, and aggregate geometry", Industri. Crop. Product., 9(2), 133-144. https://doi.org/10.1016/S0926-6690(98)00024-7
  13. Grasser, K. and Minke, G. (1990), Building with Pumice, Deutsche Gesellschaft fur Technische Zusammenarbeit (GTZ) GmbH, Eschburn, Germany, 64.
  14. Gul, R., Demirboga, R. and Guvercin, T. (2006), "Compressive strength and ultrasound pulse velocity of mineral admixtured mortars", Indian J. Eng. Mater. S., 13, 18-24.
  15. Hossain, K.M.A. (2003), "Behaviour of volcanic pumice based thin walled composite filled columns under eccentric loading", Struct. Eng. Mech., 16(1), 63-81. https://doi.org/10.12989/sem.2003.16.1.063
  16. Hossain, K.M.A. (2004a), "Potential use of volcanic pumice as a construction material", J. Mater. Civil. Eng., 16(6), 573-577. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:6(573)
  17. Hossain, K.M.A. (2004b), "Properties of volcanic pumice based cement and lightweight concrete", Cement Concrete Res., 34(2), 283-291. https://doi.org/10.1016/j.cemconres.2003.08.004
  18. Hossain, K.M.A. (2008a), "Bond characteristics of plain and deformed bars in pumice based lightweight concrete", Constr. Build. mater., 22(7), 1491-1499. https://doi.org/10.1016/j.conbuildmat.2007.03.025
  19. Hossain, K.M.A. (2008b), "Pumice based blended cement concretes exposed to marine environment: effects of mix composition and curing conditions", Cement Concrete Comp., 30(2), 97-105. https://doi.org/10.1016/j.cemconcomp.2007.05.013
  20. Hossain, K.M.A. and Lachemi, M. (2007), "Mix design, strength, durability and fire resistance of lightweight concrete with pumice aggregate", ACI Mater. J., 104(5), 449-457.
  21. Humay, F.K. and Durrani, A.J. (2001), "Experimental study of perforated infill panels for retrofitting flat plates", ACI Struct. J., 98(5), 727-734
  22. Jamal, A., Khalid, A., Haque, M.N. and Khalid, E. (1999), "Lightweight concrete in hot coastal areas", Cement Concrete Comp., 21(5-6), 453-458. https://doi.org/10.1016/S0958-9465(99)00035-9
  23. Kohono, K., Okamoto, T., Isikawa, Y., Sibata, T. and Mori, H. (1999), "Effects of artificial lightweight aggregate on autogenous shrinkage of concrete", Cement Concrete Res., 29(4), 611-614. https://doi.org/10.1016/S0008-8846(98)00202-6
  24. Kostmatka, S.H., Kerkhoff, B., Panarese, W.C., Macleod, N.F. and McGrath, R.J. (2002), Design and Control of Concrete Mixtures, 7th Canadian edition, Engineering Bulletin 101, Cement Association of Canada, Ottawa, 356.
  25. Litvan, G.G. (1985), "Further study of particulate admixtures for enhanced freeze-thaw resistance of concrete", ACI J., 82(5), 724-730.
  26. Nevile, A.M. (1995), Properties of Concrete, 4th Edition, Pitman Publishing Limited, London.
  27. Nisnevich, M. (1997), "Improving lightweight concrete with bottom ash", Concrete Inter., 1(12), 56-60.
  28. Nontananandh, S. (1990), Industrial waste utilization as construction materials by chemical stabilization, PhD thesis, Department of Civil Engineering, Kyoto University, Japan.
  29. Orchard, D.F. (1979), Concrete Technology, Vol. 2, Applied Science Publishers Ltd, London.
  30. Rivera-Villarreal, R. and Cabrera, J.G. (1999), "Microstructure of two-thousand-year old lightweight concrete", Special Publication, 186, 183-200.
  31. Stepanova, V.F. (1991), "Protection of steel reinforcing by the passivating effect of lightweight conncrete", Special Publication, 126, 1135-1146.
  32. Sturrup, V.R., Vecchio R.J. and Caratin, H. (1984), "Pulse velocity as a measure of concrete compressive strength", Special Publication, 82, 210-227.
  33. Tan, K. and Gjorv, O.E. (1996), "Performance of concrete under different curing conditions", Cement Concrete Res., 26(3), 355-361. https://doi.org/10.1016/S0008-8846(96)85023-X
  34. Tepponen, P. and Erikson, B. (1987), "Damages in concrete railway sleepers in Finland", Nordic Concrete Res., 6, 199-209.
  35. Turkmen, I., Demirboga, R. and Gul, R. (2006), "The effects of different cement dosages, slumps and pumice aggregate ratios on the freezing and thawing of concrete", Comput. Concrete, 3(2), 163-175. https://doi.org/10.12989/cac.2006.3.2_3.163
  36. Yeginobali, A., Sobolev, K.G., Soboleva, S.V. and Tokyay, M. (1998), "High strength natural lightweight aggregate concrete with silica fume", Special Publication, 178, 739-758.
  37. Zain, M.F. (1995), The study on the physical properties of surface layer concrete under the influence of medium temperature environments, PhD thesis, Faculty of Engineering, Kyushu University, Japan.

피인용 문헌

  1. Properties of artificial lightweight aggregates made from waste sludge vol.8, pp.6, 2011, https://doi.org/10.12989/cac.2011.8.6.617
  2. Influence of temperature in the evolution of compressive strength and in its correlations with UPV in eco-concretes with recycled materials vol.124, 2016, https://doi.org/10.1016/j.conbuildmat.2016.07.104
  3. Influence of ground pumice powder on the mechanical properties and durability of self-compacting mortars vol.150, 2017, https://doi.org/10.1016/j.conbuildmat.2017.05.220
  4. High temperature effect on the mechanical behavior of steel fiber reinforced self‐compacting concrete containing ground pumice powder vol.20, pp.5, 2009, https://doi.org/10.1002/suco.201900067