Computers and Concrete

  • 제6권4호
  • /
  • Pages.305-318
  • /
  • 2009
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Blast analysis of concrete arch structures for FRP retrofitting design

  • Nam, Jin-Won (Department of Civil and Environmental Engineering, University of California, School of Civil and Environmental Engineering, Yonsei University) ;
  • Kim, Ho-Jin (Institute of Technology Research Planning Team, ATMACS Co., Ltd.) ;
  • Yi, Na-Hyun (School of Civil and Environmental Engineering, Yonsei University) ;
  • Kim, In-Soon (School of Civil and Environmental Engineering, Yonsei University) ;
  • Kim, Jang-Ho Jay (School of Civil and Environmental Engineering, Yonsei University) ;
  • Choi, Hyung-Jin (Karagozian & Case)
  • 투고 : 2006.11.28
  • 심사 : 2009.06.17
  • 발행 : 2009.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Fiber Reinforced Polymer (FRP) is widely used for retrofitting concrete structures for various purposes. Especially, for the retrofitting of concrete structures subjected to blast loads, FRP is proven to be a very effective retrofitting material. However, a systematic design procedure to implement FRP for concrete structure retrofitting against blast loads does not exist currently. In addition, in case of concrete structures with inarticulate geometrical boundary conditions such as arch structures, an effective analysis technique is needed to obtain reliable results based on minimal analytical assumptions. Therefore, in this study, a systematic and efficient blast analysis procedure for FRP retrofitting design of concrete arch structure is suggested. The procedure is composed of three sequential parts of preliminary analysis, breach and debris analysis, and retrofit-material analysis. Based on the suggested procedure, blast analyses are carried out by using explicit code, LS-DYNA. The study results are discussed in detail.

키워드

과제정보

연구 과제 주관 기관 : KOSEF, KRF

참고문헌

  1. ASCE (1999), Structural Design for Physical Security, State of the Practice.
  2. Belytschko, T. and Tsay, C.S. (1981), "Explicit algorithms for nonlinear dynamics of shells", Proceedings of the Winter Annual Meeting, Washington, DC, November.
  3. Biggs, J.M. (1964), Introduction to Structural Dynamics, McGraw-Hill, New York.
  4. Buchan, P.A. and Chen, J.F. (2007), "Blast resistance of FRP composite and polymer strengthened concrete and masonry structures: A state-of-the-art review", Compos. Part B-Eng., 38(5/6), 509-522. https://doi.org/10.1016/j.compositesb.2006.07.009
  5. Byun, K.J., Nam, J.W., Kim, H.J. and Kim, S.B. (2006), "Dynamic analysis of reinforced concrete wall under blast loading", Proceedings of the 2nd ACF International Conference, Asian Concrete Federation, Bali, November.
  6. Choi, H.J. and Krauthammer, T. (2003), "Investigation of progressive collapse phenomena in a multi story building", Proceedings of the 11th International Symposium on Interaction of Effects of Munitions with Structures, Mannheim, May.
  7. Crawford, J.E., Malvar, L.J., Wesevich, J.W., Valancius, J. and Reynolds, A.D. (1997), "Retrofit of reinforced concrete structures to resist blast effects", ACI Struct. J., 94(4), 371-377.
  8. Hartmann, M. (2005), Behind-Armour Debris- Modelling and Simulation: A literature review, Base Data Report FOI-R-1678-SE, FOI - Swedish Defence Research Agency, Weapons and Protection, SE-147 25, Tumba, June.
  9. Hyde, D.W. (1992), "Fundamental of protective design for conventional weapons", CONWEP (Conventional Weapons Effects), TM5-8511-1, United States Army Waterway Experiment Station, Vicksburg, Miss.
  10. Jones, N. (1983), Structural Aspects of Ship Collisions, Chapter 11, in Structural Crashworthiness, (Eds. Jones, N. and Wierzbicki, T.), Butterworths, London, 308-337.
  11. Kingery, C.N. and Bulmash, G. (1982), Airblast Parameters from TNT Spherical Air Burst and Hemispherical Surface Burst, Technical Report ARBRL-TR-02555, U.S. Army ARDC-BRL, Aberdeen Proving Ground, MD, April.
  12. Kollar, L.P. and Springer, G.S. (2002), Mechanics of Composite Structures, Cambridge University Press, UK.
  13. Lee, K., Kim, T. and Kim, J. (2009), "Local response of W-shaped steel columns under blast loading", Struct. Eng. Mech., 31(1), 25-38. https://doi.org/10.12989/sem.2009.31.1.025
  14. Li, Q.M. and Meng, H. (2002), "Pressure-impulse diagram based on dimensional analysis and single-degree-offreedom (SDOF) model", J. Eng. Mech., ASCE, 128(1), 87-92. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(87)
  15. Livermore Software Technology Corporation (LSTC) (2003), LS-DYNA theory Manual Version 970, Livermore, California, April.
  16. Malvar, L.J., Crawford, J.E., Wesevich, J.W. and Simons, D. (1997), "A plasticity concrete material model for DYNA3D", Int. J. Impact Eng., 19(9-10), 847-873. https://doi.org/10.1016/S0734-743X(97)00023-7
  17. Marchand, K.A. and Alfawakhiri, F. (2005), Facts for Steel Buildings: Blast and Progressive Collapse, American Institute of Steel Construction (AISC), Chicago.
  18. Mosalam, K.M. and Mosallam, A.S. (2001), "Nonlinear transient analysis of reinforced concrete slab subjected to blast loading and retrofitted with CFRP composites", Compos. Part B-Eng., 32(8), 623-636. https://doi.org/10.1016/S1359-8368(01)00044-0
  19. Muszynski, L.C. and Purcell, M.R. (2003), "Composite reinforcement to strengthen existing concrete structures against air blast", J. Compos. Constr., ASCE, 7(2), 93-97. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:2(93)
  20. Nam, J.W., Kim, H.J., Kim, S.B., Kim, J.J.H. and Byun, K.J. (2009), "Analytical study of finite element models for FRP retrofitted concrete structure under blast loads", Int. J. Damage Mech., 18(5), 461-490. https://doi.org/10.1177/1056789507088339
  21. Nam, J.W., Kim, J.J.H., Kim, S.B., Yi, N.H. and Byun, K.J. (2008b), "A study on mesh size dependency of finite element blast structural analysis induced by non-uniform pressure distribution from high explosive blast wave", J. Civil Eng., KSCE, 12(4), 259-265. https://doi.org/10.1007/s12205-008-0259-x
  22. Patoary, M.K.H. and Tan, K.H. (2003), "Blast resistance of prototype in-build masonry walls strengthened with FRP systems", Proceedings of the 6th International Symposium on FRP Reinforcement for Concrete Structures, Singapore, July, 1189-1198.
  23. Silva, P.F. and Lu, B. (2007), "Improving the blast resistance capacity of RC slabs with innovative composite materials", Compos. Par B-Eng., 38, 523-534. https://doi.org/10.1016/j.compositesb.2006.06.015
  24. Tavarez, F.A. (2001), Simulation of Behavior of Composite Grid Reinforced Concrete Beams using Explicit Finite Element Method, Thesis of Master of Science, University of Wisconsin-Madison, 47-48.
  25. TM5-1300/AFR 88-2/NAVFAC P-39 (1990), Structures to Resist the Effects of Accidental Explosions, Joint Departments of the Army, Air Force and Navy Washington, DC, November.
  26. Tolba, A. (2001), Response of FRP-Retrofitted Reinforced Concrete Panels to Blast Loading, Thesis of Ph.D. of Philosophy, Department of Civil and Environmental Engineering, Carleton University, Ottawa, 78-173.
  27. Winget, D.G., Marchand, K.A. and Williamson, E.B. (2005), "Analysis and design of critical bridges subjected to blast loads", J. Struct. Eng., ASCE, 131(8), 1243-1255. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:8(1243)

피인용 문헌

  1. Blast-resistant characteristics of ultra-high strength concrete and reactive powder concrete vol.28, pp.1, 2012, https://doi.org/10.1016/j.conbuildmat.2011.09.014
  2. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2011, https://doi.org/10.12989/cac.2011.8.4.445
  3. Blast-loaded behaviors of severely damaged buried arch repaired by anchored CFRP strips vol.122, 2015, https://doi.org/10.1016/j.compstruct.2014.11.049
  4. Strengthening of Reinforced Concrete Arches with Externally Bonded Composite Materials: Testing and Analysis vol.19, pp.1, 2015, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000495
  5. Deformability design of high-performance concrete beams vol.22, pp.9, 2013, https://doi.org/10.1002/tal.728
  6. Numerical evaluation of the retrofit effectiveness for GFRP retrofitted concrete slab subjected to blast pressure vol.92, pp.5, 2010, https://doi.org/10.1016/j.compstruct.2009.10.031
  7. Experimental behaviors of CFRP cloth strengthened buried arch structure subjected to subsurface localized explosion vol.116, 2014, https://doi.org/10.1016/j.compstruct.2014.05.045
  8. Experimental study on hybrid CFRP-PU strengthening effect on RC panels under blast loading vol.93, pp.8, 2011, https://doi.org/10.1016/j.compstruct.2011.02.014
  9. CFRP strengthening reinforced concrete arches: Strengthening methods and experimental studies vol.131, 2015, https://doi.org/10.1016/j.compstruct.2015.06.034
  10. RC Arch Deck Development and Performance Evaluation for Enhanced Deck Width vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0295-y
  11. 철근콘크리트 패널의 FRP 보강에 의한 방폭 성능 향상에 관한 실험 연구 vol.22, pp.1, 2009, https://doi.org/10.4334/jkci.2010.22.1.093
  12. 차량 충돌하중을 받는 RC 압축부재의 성능기반형 저항성능 평가방법 개발 vol.22, pp.4, 2009, https://doi.org/10.4334/jkci.2010.22.4.535
  13. Normalised rotation capacity for deformability evaluation of high-performance concrete beams vol.1, pp.3, 2009, https://doi.org/10.12989/eas.2010.1.3.269
  14. Debonding failure analysis of FRP-retrofitted concrete panel under blast loading vol.38, pp.4, 2009, https://doi.org/10.12989/sem.2011.38.4.479
  15. Collision Capacity Evaluation of RC Columns by Impact Simulation and Probabilistic Evaluation vol.13, pp.2, 2009, https://doi.org/10.3151/jact.13.67
  16. 철근콘크리트 아치 데크의 정적 휨 거동 vol.29, pp.4, 2009, https://doi.org/10.4334/jkci.2017.29.4.371
  17. New methodology to prevent blasting damages for shallow tunnel vol.15, pp.6, 2009, https://doi.org/10.12989/gae.2018.15.6.1227
  18. Research on damage of 3D random aggregate concrete model under ultrasonic dynamic loading vol.26, pp.1, 2009, https://doi.org/10.12989/cac.2020.26.1.011