Computers and Concrete

  • 제6권3호
  • /
  • Pages.225-234
  • /
  • 2009
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Homogeneity of lightweight aggregate concrete assessed using ultrasonic-echo sensing

  • Wang, H.Y. (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Li, L.S. (Assets and Property Management, Hwa Hsia Institute of Technology) ;
  • Chen, S.H. (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Weng, C.F. (Department of Civil Engineering, National Kaohsiung University of Applied Sciences)
  • 투고 : 2009.04.02
  • 심사 : 2009.06.10
  • 발행 : 2009.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Dredged silt from reservoirs in southern Taiwan was sintered to make lightweight aggregates (LWA), which were then used to produce lightweight aggregate concrete (LWAC).This study aimed to assess the compressive strength and homogeneity of LWAC using ultrasonic-echo sensing. Concrete specimens were prepared using aggregates of four different particle density, namely 800, 1100, 1300 and 2650 kg/$m^3$. The LWAC specimens were cylindrical and a square wall with core specimens drilled. Besides compressive strength test, ultrasonic-echo sensing was employed to examine the ultrasonic pulse velocity and homogeneity of the wall specimens and to explore the relationship between compressive strength and ultrasonic pulse velocity. Results show that LWA, due to its lower relative density, causes bloating, thus resulting in uneven distribution of aggregates and poor homogeneity. LWAC mixtures using LWA of particle density 1300 kg/$m^3$ show the most even distribution of aggregates and hence best homogeneity as well as highest compressive strength of 63.5 MPa. In addition, measurements obtained using ultrasonic-echo sensing and traditional ultrasonic method show little difference, supporting that ultrasonic-echo sensing can indeed perform non-destructive, fast and accurate assessment of LWAC homogeneity.

키워드

과제정보

연구 과제 주관 기관 : National Science Council

참고문헌

  1. ASTM C167-09 (1998), Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations.
  2. ASTM C192/C192M-07 (1998), Standard Practices for Making and Curing Concrete Test Specimens in the Laboratory.
  3. ASTM C31/C31M-08b (1998), Standard Practice for Making and Curing Concrete Test Specimens in the Field.
  4. ASTM Standard C494/C494M-05a (2005), Standard Specification for Chemical Admixtures for Concrete, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA.
  5. ASTM C597 - 97(1998), Standard Test Method for Pulse Velocity Through Concrete .
  6. Carino, N.J. and Sansalone, M. (1990), "Flaw detection in concrete using the impact-echo method", Proceedings NATO Conference on Bridge Evaluation, Repair and Rehabilitation (Ed. Nowak, A. S.), Dordrecht, Netherlands, 101-118.
  7. Chang, P.K. (2004), "An approach to optimizing mix design for properties of high-performance concrete", Cement Concrete Res., 34(4), 623-629. https://doi.org/10.1016/j.cemconres.2003.10.010
  8. Chia, K.S. and Zhang, M.H. (2002), "Water permeability and chloride penetrability of high-strength lightweight aggregate concrete", Cement Concrete Res., 32, 639-645. https://doi.org/10.1016/S0008-8846(01)00738-4
  9. Chinese National Standards, 61 R2001 (2001), Portland cement.
  10. Chinese National Standards, 3036 A2040 (2003), Coal Fly Ash and Raw or Claimed Natural Pozzolan for Use as a Mineral Admixture in Concrete.
  11. Chinese National Standards, 12549 A2233 (1993), Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars.
  12. Chinese National Standards, 13961 A2269 (1997), Mixing Water of Concrete.
  13. Chinese National Standards, 1240 A2029 (2002), Concrete Aggregates.
  14. Chinese National Standards, 1232 (2002), Method of Test for Compressive Strength of Cylindrical Concrete Specimens.
  15. Haque, M.N., Al-Khaiat, H. and Kayali. O. (2004), "Strength and durability of lightweight concrete", Cement Concrete Comp., 26, 307-314. https://doi.org/10.1016/S0958-9465(02)00141-5
  16. Hong, M.F., Chou, F.L. and You, Y.G. (2007), "Study of property comparison of sludge lightweight aggregates sintered in rotary kiln, roller kiln and high temperature furnace", Proceedings of the Third National Lightweight Aggregate Concrete Seminar, Taiwan, 103-116.
  17. Hossain, K.M.A. (2004), "Properties of volcanique pumice based cement and lightweight concrete", Cement Concrete Res., 34, 283-91. https://doi.org/10.1016/j.cemconres.2003.08.004
  18. Huang, C.L. (2007), High performance concrete theory and practice, James Publisher, Taiwan.
  19. Jansohn, R., Kroggel, O. and Ratmann, M. (1995), "Detection of thickness, voids, honeycombs and tendon ducts utilizing ultrasonic impulse-echo-technique", Proceedings of International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE), Berlin., 26-28.
  20. Lin, J.J. (2002), "View on dredging the silt from reservoirs in Taiwan areas", In: Workshop on Dredging Reservoir Silt, Taichung.
  21. Lo, T.Y., Cui, H.Z. and Li, Z.G.. (2004), "Influence of pre-wetting and fly ash on mechanical properties of lightweight concrete", Waste Manage., 24(4), 333-338. https://doi.org/10.1016/j.wasman.2003.06.003
  22. Mouli, M. and Khelafi, H. (2008), "Performance characteristics of lightweight aggregate concrete containing natural pozzolan", Build Environ., 43(1), 31-36. https://doi.org/10.1016/j.buildenv.2006.11.038
  23. Rossignolo, J.A., Agnesini, M.V.C. and Morais, J.A. (2003), "Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates", Cement Concrete Comp., 25(1), 77-82. https://doi.org/10.1016/S0958-9465(01)00046-4
  24. Song, P.J., Ding, I.T. and Guo, Y.S. (2004), "Shrinkage of high strength lightweight aggregate concrete and research of the influence factor", Constr. Mat. J., 7(2).
  25. Sun, Y.M., Chang, T.P. and Huang, W.H. (2007), "Effects of pozzolanic material with different lightweight aggregates", Proceedings of TCI 2007 Concrete Technology Conference and Exhibition, Taipei, A-6.
  26. Wang, H.Y. and Tsai, K.C. (2006), "Engineering properties of lightweight aggregate concrete made from dredged silt", Cement Concrete Comp., 28(5), 481-485. https://doi.org/10.1016/j.cemconcomp.2005.12.005
  27. Wang, H.Y. (2007), "Study on durability of densified high-performance lightweight aggregate concrete", Comput. Concrete, 4(6), 499-510. https://doi.org/10.12989/cac.2007.4.6.499
  28. Wang, H.Y. (2003), "Study on chemical properties and lightweight aggregate production using silt of Taiwan southern reservoirs", Utilization and Promotion of Lightweight Aggregate Concrete, Energy Conservation Lightweight Aggregate Association, Taiwan.
  29. Weng, C.F. (2005), A Study of lightweight aggregate concrete by ultrasonic-echo sensing and fire-damaged, Master Thesis. Institute of Civil Engineering & Disaster Prevention of National Kaohsiung University of Applied Science, Kaohsiung.
  30. Yen, T. (2003) "Investigations of chemical properties for dredged mud of reservoirs in taiwan and the manufacturing techniques of lightweight aggregate", Proceedings of Conference on Manufacturing and Applications of Lightweight Aggregate Concrete from the Silts of Reservoirs, Taipei, 3-20.

피인용 문헌

  1. Study on the Properties of SCLAC Using Infrared Thermography and Ultrasonic Pulse Velocity vol.47, pp.3, 2018, https://doi.org/10.1520/JTE20180078
  2. Estimating properties of reactive powder concrete containing hybrid fibers using UPV vol.20, pp.4, 2009, https://doi.org/10.12989/cac.2017.20.4.491
  3. Estimation of Wave Velocity for Ultrasonic Imaging of Concrete Structures Based on Dispersion Analysis vol.48, pp.2, 2009, https://doi.org/10.1520/jte20180343