Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Modified heat of hydration and strength models for concrete containing fly ash and slag

  • Ge, Zhi (Department of Construction Management and Engineering, North Dakota State University) ;
  • Wang, Kejin (Department Civil, Construction, and Environmental Engineering, Iowa State University)
  • Received : 2008.01.11
  • Accepted : 2009.01.15
  • Published : 2009.02.25
⟨ Previous Next ⟩

Abstract

This paper describes the development of modified heat of hydration and maturity-strength models for concrete containing fly ash and slag. The modified models are developed based on laboratory and literature test results, which include different types of cement, fly ash, and slag. The new models consider cement type, water-to-cementitious material ratio (w/cm), mineral admixture, air content, and curing conditions. The results show that the modified models well predict heat evolution and compressive strength development of concrete made with different cementitious materials. Using the newly developed models, the sensitivity analysis was also performed to study the effect of each parameter on the hydration and strength development. The results illustrate that comparing with other parameters studied, w/cm, air content, fly ash, and slag replacement level have more significantly influence on concrete strength at both early and later age.

Keywords

References

  1. Alexander, K.M. (1972), "The relationship between strength and the composition and fineness of cement", Cement Concrete Res., 21, 663-680.
  2. De Schutter, G. and Taerwe, L. (1995), "General hydration model fro Portland cement and blast furnace slag cement", Cement Concrete Res., 25(3), 593-604. https://doi.org/10.1016/0008-8846(95)00048-H
  3. Freiesleben Hansen, P. and Pedersen, E.J. (1985), "Curing of concrete structures, draft DEBGuide to durable concrete structures", Appendix 1, Comite Euro-International du Beton, Lausanne, Switzerland.
  4. Dallal G.E. (2008), The Little Handbook of Statistical Practice, Retrieved December 19, 2008, from www.jerrydallal.com/LHSP/LHSP.HTM
  5. Guo, C. (1989), "Maturity of concrete: Method for predicting early-stage strength", ACI Mater. J., 86(4), 341-353.
  6. Hwang, K., Noguchi, T. and Tomosawa, F. (2004), "Prediction model of compressive strength development of fly-ash concrete", Cement Concrete Res., 34(12), 2269-2276. https://doi.org/10.1016/j.cemconres.2004.04.009
  7. Kishi, T. and Maekawa, K. (1994), "Thermal and mechanical modeling of young concrete based on hydration process of mutli-component cement minerals", Thermal Cracking in concrete at Early Ages, 11-18.
  8. Lerch, W. and Bogue, R.H. (1934), "Heat of hydration of portland cement pastes", J. Res. Natl. Bureau Stan., 12, 645-664. https://doi.org/10.6028/jres.012.057
  9. Lerch, W. and Ford, C.L. (1948), "Long-term study of cement performance in concrete: Chapter 3.chemical and physical tests of the cements", ACI Mater. J., 19(8), 745-795.
  10. Maekawa, K., Chaube, R. and Kishi, T. (1999), Modelling of Concrete Performance, Hydration, Microstructure Formation, and Mass Transport, E & FN Spon, New York, NY.
  11. Mantel, D.G. (1994), "Investigation into the hydraulic activity of five granulated blast furnace slags with eight different Portland cements", ACI Mater. J., 91(5), 471-477
  12. McIntosh J.D. (1956), "Effect of low temperature curing on the compressive strength of concrete" Proceedings of the RILEM Symposium on Winter Concreting, Danish Institue for Building Research, Session B-II, Copenhagen, 3-17.
  13. Mehta, K.P. (1986), Concrete-Structure, Properties, and Materials, Prentice-Hall, Englewood Cliffs, N.J.
  14. Mindess, S. and Young, J.F. (1981), Concrete, Prentice-Hall, Englewood Cliffs, NJ.
  15. Pann, K.S., Yen, T., Tang, C.W. and Lin, T.D. (2003), "New strength model based on water-cement ratio and capillary porosity", ACI Mater. J., 100(4), 311-318.
  16. Parrot, L.J., Gutteridge, W.A. and Killoh, D. (1990), "Monitoring portland cement hydration: comparison of methods", Cement Concrete Res., 20(6), 919-926. https://doi.org/10.1016/0008-8846(90)90054-2
  17. Popovics, S. (1987), "Model for the quantitative description of the kinetics of hardening of Portland cements", Cement Concrete Res., 17(5), 821-838. https://doi.org/10.1016/0008-8846(87)90045-7
  18. Rastrup, E. (1954), "Heat of hydration in concrete", Mag. Concrete Res., 6(17), 79-92. https://doi.org/10.1680/macr.1954.6.17.79
  19. Saul, A.G.A. (1951), "Principles Underlying the steam curing of concrete at atmospheric pressure", Mag. Concrete Res., 2(6), 127-140. https://doi.org/10.1680/macr.1951.2.6.127
  20. Schindler, A.K. (2002), Concrete Hydration, Temperature Development, and Setting at Early-Ages, Ph.D. dissertation, University of Texas at Austin.
  21. Schindler A.K. and K.J. Folliard (2005), "Heat of hydration models for cementitious materials", ACI Mater. J., 102(1), 24-33.
  22. Tsivilis, S. and Parissakis, G. (1995), "A mathematical model for the prediction of cement strength", Cement Concrete Res., 25(1), 9-14. https://doi.org/10.1016/0008-8846(94)00106-9
  23. Wood, S.L. (1992), Evaluation of the Long-Term Properties of Concrete, Portland Cement Association.
  24. Zeli J., Rusi, D. and krstulovi, R. (2004), "A mathematical model for prediction of compressive strength in cement-silica fume blends", Cement Concrete Res., 34(12), 2319-2328. https://doi.org/10.1016/j.cemconres.2004.04.015

Cited by

  1. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times vol.50, 2014, https://doi.org/10.1016/j.conbuildmat.2013.10.011
  2. Strength evaluation of concrete with fly ash and GGBFS as cement replacing materials vol.3, pp.3, 2015, https://doi.org/10.12989/acc.2015.3.3.223
  3. Hydration properties of cement pastes containing high-volume mineral admixtures vol.7, pp.1, 2010, https://doi.org/10.12989/cac.2010.7.1.017
  4. Full-scale test of the hydration heat and the curing method of the wet joints of a precast segmental pier of a bridge vol.21, pp.3, 2017, https://doi.org/10.1080/19648189.2015.1119063