Smart Structures and Systems

  • 제5권4호
  • /
  • Pages.329-344
  • /
  • 2009
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Damage state evaluation of experimental and simulated bolted joints using chaotic ultrasonic waves

  • Fasel, T.R. (University of California San Diego) ;
  • Kennel, M.B. (University of California San Diego) ;
  • Todd, M.D. (University of California San Diego) ;
  • Clayton, E.H. (Quartus Engineering) ;
  • Park, G. (Los Alamos National Laboratory)
  • 투고 : 2008.08.19
  • 심사 : 2008.09.21
  • 발행 : 2009.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Ultrasonic chaotic excitations combined with sensor prediction algorithms have shown the ability to identify incipient damage (loss of preload) in a bolted joint. In this study we examine a physical experiment on a single-bolt aluminum lap joint as well as a three-dimensional physics-based simulation designed to model the behavior of guided ultrasonic waves through a similarly configured joint. A multiple bolt frame structure is also experimentally examined. In the physical experiment each signal is imparted to the structure through a macro-fiber composite (MFC) patch on one side of the lap joint and sensed using an equivalent MFC patch on the opposite side of the joint. The model applies the waveform via direct nodal displacement and 'senses' the resulting displacement using an average of the nodal strain over an area equivalent to the MFC patch. A novel statistical classification feature is developed from information theory concepts of cross-prediction and interdependence. This damage detection algorithm is used to evaluate multiple damage levels and locations.

키워드

참고문헌

  1. Abbate, A., Koay, J., Frankel, J., Schroeder, S.C. and Das, P. (1997), "Signal detection and noise suppression using a wavelet transform signal processor: application to ultrasonic flaw detection", IEEE T. Utrason. Ferr., 44, 14-26. https://doi.org/10.1109/58.585186
  2. Alleyne, D.N., Lowe, M.J.S. and Cawley, P. (1996), "The inspection of chemical plant pipework using Lamb waves: defect sensitivity and field experience", In: Review of Progress in Quantitative Nondestructive Evaluation, Thompson, D.P. and Chimenti, D.E. (eds.), Plenum, New York, 1859-1866.
  3. Brockwell, P.J. and Davis, R.A. (1991), Time Series: Theory and Methods, Springer, New York.
  4. Bursi, O.S. and Jaspart, J.P. (1998), "Benchmarks for finite element modeling of bolted steel connections", J. Constr. Steel Res., 69, 361-382.
  5. Bursi, O.S. and Jaspart, J.P. (1997), "Basic issues in the finite element simulation of extended end plate connections", Comput. Struct., 43, 17-42.
  6. Castaings, M., Cawley, P. and Farlow, R. (1996), "Air-coupled ultrasonic transducers for the detection of defects in plates", In: Review of Progress in Quantitative Nondestructive Evaluation, Thompson, D.P. and Chimenti, D.E. (eds.), Plenum, New York, 1083-1090.
  7. Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W. (1996), "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature Review", Los Alamos National Laboratory Report, LA-13070-MS.
  8. Fasel, T.R., Todd, M.D. and Park, G. (2005), "Piezoelectric active sensing using chaotic excitations and state space reconstruction", Proc. of the SPIE 10th Annual Int. Symposium on NDE for Health Monitoring and Diagnostics, 5768, San Diego, CA, March.
  9. Fasel, T.R., Todd, M.D. and Park, G. (2006), "Active chaotic excitation for bolted joint monitoring", Proc. of the SPIE 11th Annual Int. Symposium on NDE for Health Monitoring and Diagnostics, 6174, San Diego, CA, March.
  10. Fasel, T.R., Olson, C.C. and Todd, M.D. (2008), "Optimized guided wave excitations for health monitoring of a bolted joint", Proc. of the SPIE 13th Annual Int. Symposium on NDE for Health Monitoring and Diagnostics, 6935, San Diego, CA, March.
  11. Giurgiutiu, V. and Zagrai, A. (2002), "Embedded self-sensing piezoelectric active sensors for on-line structural identification", J. Vib. Acoust., 124, 116-125. https://doi.org/10.1115/1.1421056
  12. Giurgiutiu, V. (2005), "Tuned Lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring", J. Intel. Mat. Syst. Struct., 16, 291-305. https://doi.org/10.1177/1045389X05050106
  13. Guyott, C.H., Cawley, P. and Adams, R.D. (1986), "The non-destructive testing of adhesively bonded structures", J. Adhesion, 20, 129-159. https://doi.org/10.1080/00218468608074943
  14. Guyott, C.H. and Cawley, P. (1988), "Evaluation of cohesive properties of adhesive joints using ultrasonic spectroscopy", NDT International, 21, 233-240.
  15. Hess, D.P. (1998), Vibration and shock-induced loosening, In: Handbook of Bolts and Bolted Joints, Bickford, J. H. and Nasser S. (Eds.), Marcel Dekker, New York.
  16. Lanza di Scalea, F., Rizzo, P. and Marzani, A. (2004), "Propagation of ultrasonic guided waves in lapshear adhesive joints: case of incident a0 Lamb wave", J. Acoust. Soc. Am., 115, 146-156. https://doi.org/10.1121/1.1630999
  17. Lowe, M.J.S. and Cawley, P. (1994), "Applicability of plate wave techniques for the inspection of adhesive and diffusion bonded joints", J. Nondestruct. Eval., 13, 185-200. https://doi.org/10.1007/BF00742584
  18. Michaels, J.E. and Michaels, T.E. (2005), "Detection of structural damage from the local temporal coherence of diffuse ultrasonic signals", IEEE T. Utrason Ferr., 52, 1769-82. https://doi.org/10.1109/TUFFC.2005.1561631
  19. Nichols, J.M., Todd, M.D. and Wait, J.R. (2003), "Using state space predictive modeling with chaotic interrogation in detecting joint preload loss in a frame structure experiment", Smart Mater. Struct., 12(4), 580-601. https://doi.org/10.1088/0964-1726/12/4/310
  20. Pai, N.G. and Hess, D.P. (2002), "Experimental study of loosening of threaded fasteners due to dynamic shear loads", J. Sound Vib., 253, 585-602. https://doi.org/10.1006/jsvi.2001.4006
  21. Pai, N.G. and Hess, D.P. (2002), "Three-dimensional finite element analysis of threaded fastener loosening due to dynamic shear load", Eng. Fail. Anal., 9, 383-402. https://doi.org/10.1016/S1350-6307(01)00024-3
  22. Pilarski, A. and Rose, J.L. (1992), "Lamb wave mode selection concepts for interfacial weakness analysis", J. Nondestruct. Eval., 11, 237-249. https://doi.org/10.1007/BF00566414
  23. Rokhlin, S.I. (1991), "Lamb wave interaction with lap-shear adhesive joints: theory and experiment", J. Acoust. Soc. Am., 89, 2758-2765. https://doi.org/10.1121/1.400715
  24. Seifried, R., Jacobs, L.J. and Qu, J. (2002), "Propagation of guided waves in adhesive bonded components", NDT&E Int., 35, 317-328. https://doi.org/10.1016/S0963-8695(01)00056-1
  25. Shannon, C.E. and Weaver, W. (1949), The Mathematical Theory of Communication, Univ. of Illinois Press, Illinois.
  26. Sohn, H. and Farrar, C.R. (2001), "Damage diagnosis using time series analysis of vibration signals", Smart Mater. Struct., 10(3), 446-451. https://doi.org/10.1088/0964-1726/10/3/304
  27. Sohn, H., Farrar, C.R., Hunter, N.F. and Worden, K. (2001), "Structural health monitoring using statistical pattern recognition", J. Dyn. Syst. Meas. Control, 123, 706-711. https://doi.org/10.1115/1.1410933
  28. Staszewski, W.J., Lee, B.C., Mallet, L. and Scarpa, F. (2004), "Structural health monitoring using scanning laser vibrometry: I. Lamb wave sensing", Smart Mater. Struct., 13(2), 251-260. https://doi.org/10.1088/0964-1726/13/2/002
  29. Todd, M.D., Erickson, K., Chang, L., Lee, K. and Nichols, J.M. (2004), "Using chaotic interrogation and attractor nonlinear cross-prediction error to detect fastener preload loss in an aluminum frame", Chaos: An Interdisciplinary J. Nonlinear Sci., 14(2), 387-399. https://doi.org/10.1063/1.1688091
  30. Todd, M.D., Nichols, J.M., Nichols, C.J. and Virgin L.N. (2004), "An assessment of modal property effectiveness in detecting bolted joint degradation: theory and experiment", J. Sound Vib., 275, 1113-1126. https://doi.org/10.1016/j.jsv.2003.10.037
  31. Tuzzeo, D. and Lanza di Scalea, F. (2001), "Non-contact air-coupled ultrasonic guided waves for detection of thinning defects in aluminum plates", Res. Nondestruct. Eval., 13(2), 61-78. https://doi.org/10.1080/09349840109409687
  32. Wait, J.R., Park, G., Sohn, H. and Farrar, C.R. (2004), "Plate damage identification using wave propagation and impedance methods", Proc. of the SPIE 9th Annual Int. Symposium on NDE for Health Monitoring and Diagnostic, 5394, San Diego, CA, March.
  33. Wilcox, P.D., Lowe, M.J.S. and Cawley, P. (1999), "Long range Lamb wave inspection: the effect of dispersion and modal selectivity", In: Review of Progress in Quantitative Nondestructive Evaluation, Thompson, D. P. and Chimenti, D. E. (eds.), Plenum, New York, 151-158.
  34. Xu, P.C., Mal, A.K. and Bar-Cohen, Y. (1990), "Inversion of leaky Lamb wave data to determine cohesive properties of bonds", Int. J. Eng. Sci., 28, 331-346. https://doi.org/10.1016/0020-7225(90)90106-S

피인용 문헌

  1. An adhesive bond state classification method for a composite skin-to-spar joint using chaotic insonification vol.329, pp.15, 2010, https://doi.org/10.1016/j.jsv.2010.02.009
  2. Assessing joint integrity of a lug assembly using piezoelectric active sensors vol.19, pp.7, 2012, https://doi.org/10.1002/stc.1507
  3. Health monitoring of 90° bolted joints using fuzzy pattern recognition of ultrasonic signals vol.23, pp.1, 2014, https://doi.org/10.1088/0964-1726/23/1/015017
  4. Use of Time-Series Predictive Models for Piezoelectric Active-Sensing in Structural Health Monitoring Applications vol.134, pp.4, 2012, https://doi.org/10.1115/1.4006410
  5. Damage detection potential of a triangular piezoelectric configuration vol.25, pp.7, 2011, https://doi.org/10.1016/j.ymssp.2011.02.010
  6. The performance of integrated active fiber composites in carbon fiber laminates vol.20, pp.7, 2011, https://doi.org/10.1088/0964-1726/20/7/075007
  7. Chaotic insonification for health monitoring of an adhesively bonded composite stiffened panel vol.24, pp.5, 2010, https://doi.org/10.1016/j.ymssp.2009.12.002
  8. A non-destructive method for elliptical cracks identification in shafts based on wave propagation signals and genetic algorithms vol.10, pp.1, 2009, https://doi.org/10.12989/sss.2012.10.1.047