Smart Structures and Systems

  • 제5권3호
  • /
  • Pages.223-240
  • /
  • 2009
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Health Monitoring System (HMS) for structural assessment

  • e Matos, Jose Campos (University of Porto, Faculty of Engineering, Rua Dr. Roberto Frias s/n, Civil Engineering Department) ;
  • Garcia, Oscar (University of Girona, Campus Montilivi, Edificio P-IV, Automatic, Informatics and Electronic Department) ;
  • Henriques, Antonio Abel (University of Porto, Faculty of Engineering, Rua Dr. Roberto Frias s/n, Civil Engineering Department) ;
  • Casas, Joan Ramon (Technical University of Catalonia, School of Civil Engineering) ;
  • Vehi, Josep (University of Girona, Campus Montilivi, Edificio P-IV, Automatic, Informatics and Electronic Department)
  • 투고 : 2008.02.25
  • 심사 : 2008.09.22
  • 발행 : 2009.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

As in any engineering application, the problem of structural assessment should face the different uncertainties present in real world. The main source of uncertainty in Health Monitoring System (HMS) applications are those related to the sensor accuracy, the theoretical models and the variability in structural parameters and applied loads. In present work, two methodologies have been developed to deal with these uncertainties in order to adopt reliable decisions related to the presence of damage. A simple example, a steel beam analysis, is considered in order to establish a liable comparison between them. Also, such methodologies are used with a developed structural assessment algorithm that consists in a direct and consistent comparison between sensor data and numerical model results, both affected by uncertainty. Such algorithm is applied to a simple concrete laboratory beam, tested till rupture, to show it feasibility and operational process. From these applications several conclusions are derived with a high value, regarding the final objective of the work, which is the implementation of this algorithm within a HMS, developed and applied into a prototype structure.

키워드

참고문헌

  1. Altus, E., Totry, E. and Givli, S. (2005), "Optimized functional perturbation method and morphology based effective properties of randomly heterogeneous beams", Int. J. Solids Struct., 42(8), 2345-59. https://doi.org/10.1016/j.ijsolstr.2004.09.025
  2. Ayyub, B.M. and Gupta, M.M. (1997), Uncertainty Analysis in Engineering and Sciences: Fuzzy Logic, Statistics, and Neural Network approach, Kluwer Academic Publishers.
  3. Biondini, F., Bontempi, F. and Malerba, P.G. (2004), "Fuzzy reliability analysis of concrete structures", Comput. Struct., 82(13-14), 1033-52. https://doi.org/10.1016/j.compstruc.2004.03.011
  4. Contreras, H. (1980), "The stochastic finite element", Comput. Struct., 12, 341-8. https://doi.org/10.1016/0045-7949(80)90031-0
  5. Fetz, T., Oberguggenberger, M. and Pittschmann, S. (2000), "Applications of possibility and evidence theory in civil engineering", Int. J. Uncertain, Fuzz., 8(3), 295-309. https://doi.org/10.1142/S0218488500000216
  6. Figueiras, J., Felix, C., Matos, J.C. and Sousa, H. (2004), "An integrated system for structural health monitoring- application to the sorraia river bridge", IABMAS, October 18-22, Kyoto, Japan.
  7. Frangopol, D.M., Lee, Y.H. and William, K.J. (1996), "Nonlinear finite element reliability analysis of concrete", J. Eng. Mech. ASCE, 122(12), 1174-82. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:12(1174)
  8. Garcia, O., Matos, J.C., Vehi, J., Sainz, M. and Casas, J.R. (2004), "Application of interval analysis to solve civil engineering problems - some examples", Structural Health Monitoring, July 7-9, Munich. Germany.
  9. Gardenyes, E., Sainz, M.A., Jorba, L., Calm, R., Estela, R., Mielgo, H. and Trepat, A. (2001), "Modal Intervals", Reliable Computing, 7(2), 77-111. https://doi.org/10.1023/A:1011465930178
  10. GRID (2003), A13 - Highway Almeirim-Marateca, Track Salvaterra de Magos - A10 - Santo Estevao, Sorraia River Bridge, Design Project, Descriptive and Justification Memory, Lisbon.
  11. Hansen, E. (1992), Global Optimization Using Interval Analysis, Marcel Dekker, New York.
  12. Herrero, P., Sainz, M.A., Vehi, J. and Jaulin, L. (2005), "Quantified set inversion algorithm with applications to control", Reliable Computing, 11, 369-382. https://doi.org/10.1007/s11155-005-0044-1
  13. Hurtado, J.E. (2002), "Analysis of one-dimensional stochastic finite elements using neural networks", Probabilist. Eng. Mech., 17(1), 35-44. https://doi.org/10.1016/S0266-8920(01)00011-X
  14. Jaulin, L., Kieffer, M., Didrit, O. and Walter, E. (2001), Applied Interval Analysis, Springer, London.
  15. Liu, P. and Der Kiureghian, A. (1991), "Finite element reliability of geometrically nonlinear uncertain structures", J. Eng. Mech. ASCE, 117(8), 1806-25. https://doi.org/10.1061/(ASCE)0733-9399(1991)117:8(1806)
  16. Mahadevan, S., Raghothamachar, P. (2000), "Adaptive simulation for system reliability analysis of large structures", Comput. Struct., 77(6), 725-34. https://doi.org/10.1016/S0045-7949(00)00013-4
  17. Matos, J.C., Casas, J.R. and Figueiras, J.A. (2005a), "A new methodology for damage assessment of bridges through instrumentation: application to the sorraia river bridge", Struct. Infrastruct. E., 1(4), 239-252. https://doi.org/10.1080/15732470500204431
  18. Matos, J.C., Sousa, H., Assis, W. and Figueiras, J.A. (2005b), "Structure assessment by continuous monitoring - application to sorraia river bridge", Fib Symposium Keep Concrete Attractive, May 23-25, Budapest. Hungary.
  19. Moore, R.E. (1966), Interval Analysis, Prentice Hall, Englewood Cliffs.
  20. Mufti, A. (2001), Guidelines for structural health monitoring, Design Manual No. 2. ISIS Canada Corporation. Manitoba, Canada.
  21. Mullen, R.L. and Muhanna, R.L. (1999), "Bounds of structural response for all possible loading combinations", J. Struct. Eng. ASCE, 125(1), 98-106. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(98)
  22. Neumaier, A. (1990), Interval methods for systems of equations, Cambridge University Press.
  23. Oberkampf, W.L., DeLand, S., Rutherford, B.M., Diegert, K.V. and Alvin, K.F. (2002), "Error and uncertainty in modelling and simulation", Reliab. Eng. System Safe., 75, 333-357. https://doi.org/10.1016/S0951-8320(01)00120-X
  24. Olsson, A., Sandberg, G. and Dahlblom, O. (2003), "On Latin hypercube sampling for structural reliability analysis", Struct. Saf., 25(1), 47-68. https://doi.org/10.1016/S0167-4730(02)00039-5
  25. Perdigão, V., Barros, P., Dias, I., Pereira, D., Alves, J., Sousa, H., Matos, J.C. and Figueiras, J.A. (2004), "Structural health monitoring system applied to sorraia river bridge", Portuguese Structural Concrete Meeting, November 17-19, Porto, Portugal.
  26. Perdigqo, V., Barros, P., Matos, J.C., Henriques, A.A., Figueiras, J.A., Dias, I. and Pereira, D. (2006), "SMARTE - development and implementation of a long-term structural health monitoring", Third Int. Conf. Bridge Maintenance, Safety and Management, July 16-19, Porto, Portugal.
  27. Reh, S., Beley, J.D., Mukherjee, S. and Khor, E.H. (2006), "Probabilistic finite element analysis using ANSYS", Struct. Saf., 28(1-2), 17-43. https://doi.org/10.1016/j.strusafe.2005.03.010
  28. Schueller, G.I. (2001), "Computational stochastic mechanics - recent advances", Comput. Struct., 79(22-25), 2225-2234. https://doi.org/10.1016/S0045-7949(01)00078-5
  29. SIGLA/X group (1999), "Modal intervals. basic tutorial. applications of interval analysis to systems and control", Proc. of the Workshop MISC'99, University of Girona, Spain, 157-227.
  30. Sousa, H., Matos, J.C., Assis, W., Felix, C. and Figueiras, J.A. (2005), "Load test of sorraia river bridge in highway A13 (Almeirim-Marateca)", Technical Report, June.
  31. Spanos, P.D. and Ghanem, R. (1989), "Stochastic finite element expansion for random media", J. Eng. Mech. ASCE, 115(5), 1035-53. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:5(1035)
  32. Tennyson, R. (2001), Installation, use and repair of fiber optic sensors, Design Manual No. 1. ISIS Canada Corporation, Manitoba, Canada.
  33. Thomos, G.C. and Trezos, C.G. (2006), "Examination of the probabilistic response of reinforced concrete structures under static non-linear analysis", Eng. Struct., 28(1), 120-33. https://doi.org/10.1016/j.engstruct.2005.08.003
  34. Zhang, J., Ellingwood, B. (1996), "SFEM for reliability with material nonlinearities", J. Struct. Eng. ASCE, 122(6), 701-4. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:6(701)
  35. Zhang, Y., Chen, S., Liu, Q. and Liu, T. (1996), "Stochastic perturbation finite elements", Comput. Struct., 59(13), 425-29. https://doi.org/10.1016/0045-7949(95)00267-7

피인용 문헌

  1. Hydrothermal monitoring using embedded sensors of the actual roof system of the Prado Museum vol.24, pp.12, 2010, https://doi.org/10.1016/j.conbuildmat.2010.05.018
  2. A State-of-the-Art Review on Fatigue Life Assessment of Steel Bridges vol.2014, 2014, https://doi.org/10.1155/2014/956473
  3. A review on deep learning-based structural health monitoring of civil infrastructures vol.24, pp.5, 2009, https://doi.org/10.12989/sss.2019.24.5.567
  4. Design and Validation of a Scalable, Reconfigurable and Low-Cost Structural Health Monitoring System vol.21, pp.2, 2021, https://doi.org/10.3390/s21020648
  5. Measurement of Acceleration Response Functions with Scalable Low-Cost Devices. An Application to the Experimental Modal Analysis vol.21, pp.19, 2021, https://doi.org/10.3390/s21196637