Smart Structures and Systems

  • 제5권2호
  • /
  • Pages.153-171
  • /
  • 2009
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Model-based and wavelet-based fault detection and diagnosis for biomedical and manufacturing applications: Leading Towards Better Quality of Life

  • Kao, Imin (Department of Mechanical Engineering, SUNY at Stony Brook) ;
  • Li, Xiaolin (Department of Mechanical Engineering, SUNY at Stony Brook) ;
  • Tsai, Chia-Hung Dylan (Department of Mechanical Engineering, SUNY at Stony Brook)
  • 투고 : 2008.06.05
  • 심사 : 2008.08.24
  • 발행 : 2009.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the analytical fault detection and diagnosis (FDD) is presented using model-based and signal-based methodology with wavelet analysis on signals obtained from sensors and sensor networks. In the model-based FDD, we present the modeling of contact interface found in soft materials, including the biomedical contacts. Fingerprint analysis and signal-based FDD are also presented with an experimental framework consisting of a mechanical pneumatic system typically found in manufacturing automation. This diagnosis system focuses on the signal-based approach which employs multi-resolution wavelet decomposition of various sensor signals such as pressure, flow rate, etc., to determine leak configuration. Pattern recognition technique and analytical vectorized maps are developed to diagnose an unknown leakage based on the established FDD information using the affine mapping. Experimental studies and analysis are presented to illustrate the FDD methodology. Both model-based and wavelet-based FDD applied in contact interface and manufacturing automation have implication towards better quality of life by applying theory and practice to understand how effective diagnosis can be made using intelligent FDD. As an illustration, a model-based contact surface technology an benefit the diabetes with the detection of abnormal contact patterns that may result in ulceration if not detected and treated in time, thus, improving the quality of life of the patients. Ultimately, effective diagnosis using FDD with wavelet analysis, whether it is employed in biomedical applications or manufacturing automation, can have impacts on improving our quality of life.

키워드

참고문헌

  1. Biagiotti, L., Tiezzi, P., Melchiorri, C. and Vassura, G. (2005), "Modelling and identification of soft pads for robotic hands", Proc. IEEE Int. Conf. on Intelligent Robots and Systems, IROS, Edmonton, Canada.
  2. Burstedt, M. K., Flanagan, J. R. and Johansson, R. S. (1999), "Control of grasp stability in humans under different frictional conditions during multidigit manipulation", The J. Neurophysiology, 82(5), 2393-2405. https://doi.org/10.1152/jn.1999.82.5.2393
  3. Chang, S., Lin, C. and Chang, C. (2002), "A fuzzy diagnosis approach using dynamic fault trees", Chemical Eng. Sci., 57, 2971-2985. https://doi.org/10.1016/S0009-2509(02)00178-1
  4. Chui, C.K. (1992), An Introduction to Wavelets, Academic Press.
  5. Daubechies, I. (1992), Ten Lectures on Wavelets, Society for Industrial and Applied Mathematics.
  6. Diabetes Day-by-Day, (1995), "Neuropathy and foot care", American Diabetes Association, Tech. Rep.
  7. National Diabetes Information Clearinghouse (NDIC) (2007), "http://diabetes.niddk.nih.gov/dm/pubs/statistics/", National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK), Tech. Rep. 2007.
  8. Findley, W.N., Lai, J.S. and Onaran, K. (1976), Creep and Relaxation of Nonlinear Viscoelastic Materials. North-Holland Publishing Company.
  9. Fung, Y. C. (1993), Biomechanics: Mechanical Properties of Living Tissues, Springer-Verlag.
  10. Hertz, H. (1882), On the Contact of Rigid Elastic Solids and on Hardness, chapter 6: Assorted Papers by H. Hertz. MacMillan, New York, November.
  11. Isermann, R. (1997), "Supervision, fault-detection and fault-diagnosis methods -an introduction", Control Eng. Practice, 5(5), 639-652. https://doi.org/10.1016/S0967-0661(97)00046-4
  12. Jain, A.K., Duin, R.P.W. and Mao, J. (2000), "Statistical pattern recognition: A review", IEEE Trans. on Pattern Analysis and Machine Intelligence, 22(1), 4-37. https://doi.org/10.1109/34.824819
  13. Jakubek, S. and Jorgl, (2000), "Fault-diagnosis and fault-compensation for nonlinear systems", Proceedings of the American Control Conference, June, pp. 3198-3202.
  14. Jensen, A. and la Cour-harbo, A. (2001), Ripples in Mathematics: The Discrete Wavelet Transform, Springer.
  15. Jin, J. and Shi, J. (2001), "Automatic feature extraction of waveform signal for in-process performance improvement", J. Intell. Manufacturing, 12, 257-268. https://doi.org/10.1023/A:1011248925750
  16. Johnson, K. L. (1985), Contact Mechanics, Cambridge University Press.
  17. Kao, I. and Yang, F. (2004), "Stiffness and contact mechanics for soft fingers in grasping and manipulation", the IEEE Trans. of Robotics and Automation, 20(1), 132-135. https://doi.org/10.1109/TRA.2003.820868
  18. Kao, I. and Zhang, K. (2007), "Miniaturized sensors for intelligent system fault detection and diagnosis", Proceedings of the SPIE SSN 07 Conference, SSN07. San Diego, California: SPIE, March 18-22.
  19. Kao, I., Kumar, A. and Binder, J. (2007), "Smart MEMS flow sensor: theoretical analysis and experimental characterization", IEEE Sensors J., 7(5), 713-722. https://doi.org/10.1109/JSEN.2007.894910
  20. Kao, I., Kumar, A., Boehm, C. and Binder, J. (2006), "Intelligent diagnosis of mechanical-pneumatic systems using miniaturized sensors", Proceedings of the SPIE Smart Structures and Materials/NDE Meeting, vol. 6174. San Diego: SPIE, Feb-Mar, pp. 617 422-1-617 422-12.
  21. Kao, I., Li, X. and Binder, J. (2003), "Fault detection and diagnosis of pneumatic systems", NFPA's Educator/Industry Summit, Indianapolis, Indiana, October.
  22. Kao, I., Lynch, K. and Burdick, J. (2008), International Robotics Handbook: Contact Modeling and Manipulation. Springer-Verlag, vol. IV, ch. 27.
  23. Kong, K., Bae, J. and Tomizuka, M. (2008), "Detection of abnormalities in a human gait using smart shoes", Proc. of SPIE, 6932(69322G).
  24. Li, X. and Kao, I. (2004), "Fault detection and diagnosis for pneumatic system using wavelet transform and feature extraction", SCI-2004, the 8th World Multi-Conference on Systemics, Cybernetics, and Informatics, Orlando, Florida, July 18-21, pp. 320-325.
  25. Li, X. and Kao, I. (2005), "Analytical fault detection and diagnosis (FDD) for pneumatic systems in robotics and manufacturing automation", IEEE/RSJ International Conference in Intelligent Robots and Systems, IROS 2005, Alberta, Canada, August 2-6, pp. 2517-2522.
  26. Pawluk, D.T.V. and Howe, R.D. (1999), "Dynamic lumped element response of the human fingerpad", ASME J. Biomech. Eng., 121(2), 178-183. https://doi.org/10.1115/1.2835100
  27. Pittner, S. and Kamarthi, S. V. (1999), "Feature extraction from wavelet coefficients for pattern recognition task", IEEE Transactions on Pattern Analysis and Machine Intelligence, 21(1), January.
  28. Simani, S., Fantuzzi, C. and Patton, R. J. (2003), Model-based Fault Diagnosis in Dynamic System Using Identication Techniques, Springer.
  29. Skoundrianos, E.N. and Tzafestas, S.G. (2002), "Fault diagnosis via local neural networks", Mathematics and Computers in Simulation, 60, 169-180. https://doi.org/10.1016/S0378-4754(02)00012-5
  30. Theodoridis, S. and Koutroumbas, K. (2003), Pattern Recognition. Academic Press.
  31. Tiezzi, P. and Kao, I. (2007), "Modeling of viscoelastic contacts and evolution of limit surface for robotic contact interface", IEEE Transaction on Robotics, 23(2), 206-217. https://doi.org/10.1109/TRO.2006.889494
  32. Tiezzi, P., Kao, I. and Vassura, G. (2006), "Effect of layer compliance on frictional behavior of soft robotic fingers", Proc. IEEE Int. Conf. on Intelligent Robots and Systems (IROS 2006), Beijing, China, October, pp. 4012-4017.
  33. Tiezzi, P., Kao, I. and Vassura, G. (2007), "Effect of layer compliance on frictional behavior of soft robotic fingers", Advanced Robotics, 21(14), 1653-1670. https://doi.org/10.1163/156855307782227390
  34. Tiezzi, P., Vassura, G., Biagiotti, L. and Melchiorri, C. (2005), "Nonlinear modeling and experimental identification of hemispherical soft pads for robotic manipulators", Proc. of IDETC/CIE ASME Int. Design Engineering Technical Conf. & Computers and Information in Engineering Conf., Long Beach, CA.
  35. U. S. H. C. F. A. (HCFA), "The therapeutic shoe bill: Medicare carriers manual-section 2134", HCFA, Tech. Rep., August 2002.
  36. Xydas, N. and Kao, I. (1999), "Modeling of contact mechanics and friction limit surface for soft fingers in robotics, with experimental results", Int. J. Robotic Res., 18(8), 941-950. https://doi.org/10.1177/02783649922066673

피인용 문헌

  1. Image recognition technology in rotating machinery fault diagnosis based on artificial immune vol.6, pp.4, 2010, https://doi.org/10.12989/sss.2010.6.4.389