DOI QR코드

DOI QR Code

Experimental evaluation on the seismic performance of high strength thin-walled composite members accounting for sectional aspect ratio effect

  • Hsu, H.L. (Dept. of Civil Engineering, National Central University) ;
  • Juang, J.L. (Dept. of Civil Engineering, National Central University) ;
  • Luo, K.T. (Dept. of Civil Engineering, National Central University)
  • 투고 : 2009.02.24
  • 심사 : 2009.06.19
  • 발행 : 2009.07.25

초록

This study focuses on the experimental evaluation of the flexural-torsional performance of high strength thin-walled composite members. A series of tests on composite members with various sectional aspect ratios subjected to eccentric cyclic loads were conducted. Test results show that the composite member's torsional strength could be approximated using a series of linear segments and evaluated using the superposition of the component steel and reinforced concrete responses. It is also validated from the tests that the strength deterioration of members subjected to combined loads is closely related to the aspect ratios of the sections. An interaction expression between the bending and torsion for high strength thin-walled composite members is proposed for engineering practice references.

키워드

과제정보

연구 과제 주관 기관 : National Science Council

참고문헌

  1. Boyd, P.F., Cofer, W.F. and Mclean, D.I. (1995), "Seismic performance of steel-encased concrete columns under flexural loading", ACI Struct. J., 92(3), 355-364.
  2. Chen, C.C., Li, J.M. and Weng, C.C. (2005), "Experimental behaviour and strength of concrete-encased composite beam-columns with T-shaped steel section under cyclic loading", J. Constr. Steel Res., 61(7), 863-881. https://doi.org/10.1016/j.jcsr.2005.01.002
  3. Elchalakani, M., Zhao, X.L. and Grzebieta, R. (2002), "Tests on concrete filled double-skin (CHS outer and SHS inner) composite short columns under axial compression", Thin-Wall. Struct., 40(5), 415-441. https://doi.org/10.1016/S0263-8231(02)00009-5
  4. Han, L.H., Yao, G.H. and Zhao, X.L. (2004), "Behavior and calculation on concrete-filled steel CHS (circular hollow section) beam-columns", Steel Compos. Struct., 4(3), 169-188. https://doi.org/10.12989/scs.2004.4.3.169
  5. Hossain, K.M.A. and Wright, H.D. (2004), "Flexural and shear behaviour of profiled double skin composite elements", Steel Compos. Struct., 4(2), 113-132. https://doi.org/10.12989/scs.2004.4.2.113
  6. Hsu, H.L. and Wang, C.L. (2000), "Flexural-torsional behavior of steel reinforced concrete members subjected to repeated loading", Earthq. Eng. Struct. D., 29(5), 667-682. https://doi.org/10.1002/(SICI)1096-9845(200005)29:5<667::AID-EQE930>3.0.CO;2-Y
  7. Hsu, H.L. and Liang, L.L. (2003), "Performance of hollow composite members subjected to cyclic eccentric loading", Earthq. Eng. Struct. D., 32(3), 443-461. https://doi.org/10.1002/eqe.235
  8. Hsu, H.L. and Tsao, J.W. (2007), "Flexural-torsional performance of thin-walled steel hollow box columns subjected to a cyclic eccentric load", Thin-Wall. Struct., 45(2), 149-158. https://doi.org/10.1016/j.tws.2007.02.005
  9. Ishizawa, T., Nakano, T. and Iura, M. (2006), "Experimental study on partially concrete-filled steel tubular columns", Steel Compos. Struct., 6(1), 55-69. https://doi.org/10.12989/scs.2006.6.1.055
  10. Lam, D. and Williams, C.A. (2004), "Experimental study on concrete filled square hollow sections", Steel Compos. Struct., 4(2), 95-112. https://doi.org/10.12989/scs.2004.4.2.095
  11. Legeron, F. and Paultre, P. (2000), "Behavior of high-strength concrete columns under cyclic flexure and constant axial load", ACI Struct. J., 97(4), 591-601.
  12. Mirza, S.A. and Skrabek, B.W. (1991), "Reliability of short composite beam-column strength interaction", J. Struct. Eng. ASCE, 117(8), 2320-2339. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:8(2320)
  13. Mo, Y.L., Jeng, C.H. and Perng, S.F. (2001), "Seismic shear behavior of rectangular hollow bridge columns", Struct. Eng. Mech., 12(4), 429-448. https://doi.org/10.12989/sem.2001.12.4.429
  14. Ricles, J.M. and Paboojian, S.D. (1994), "Seismic performance of steel-encased composite columns", J. Struct. Eng. ASCE, 120(8), 2474-2494. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2474)
  15. Tao, Z., Han, L.H. and Zhao, X.L. (2004), "Behaviour of concrete-filled double skin (CHS inner and CHS outer) steel tubular stub columns and beam-columns", J. Constr. Steel Res., 60(8), 1129-1158. https://doi.org/10.1016/j.jcsr.2003.11.008
  16. Tao, Z. and Han, L.H. (2006), "Behaviour of concrete-filled double skin rectangular steel tubular beamcolumns", J. Constr. Steel Res., 62(7), 631-646. https://doi.org/10.1016/j.jcsr.2005.11.008
  17. Tokgoz, S. and Dundar, C. (2008), "Experimental tests on biaxially loaded concrete-encased composite columns", Steel Compos. Struct., 8(5), 423-438. https://doi.org/10.12989/scs.2008.8.5.423
  18. Uenaka, K. and Kitoh, H. (2008), "Concrete filled double skin tubular members subjected to bending", Steel Compos. Struct., 8(4), 297-312. https://doi.org/10.12989/scs.2008.8.4.297
  19. Yang, C., Cai, J., Wu, Y., He, J.G. and Chen, H.F. (2006), "Behaviors of box-shape steel reinforced concrete composite beam", Struct. Eng. Mech., 22(4), 419-432. https://doi.org/10.12989/sem.2006.22.4.419
  20. Zhao, X.L. and Grzebieta, R. (2002), "Strength and ductility of concrete filled double skin (SHS inner and SHS outer) tubes", Thin-Wall. Struct., 40(2), 199-213. https://doi.org/10.1016/S0263-8231(01)00060-X

피인용 문헌

  1. Uni-axial behaviour of normal-strength CFDST columns with external steel rings vol.13, pp.6, 2012, https://doi.org/10.12989/scs.2012.13.6.587
  2. Efficiency on uni-axial compressive strength improvement by using externally confined concrete-filled steel tube columns vol.20, pp.2, 2013, https://doi.org/10.1080/1023697X.2013.794572
  3. Uni-axial behaviour of normal-strength concrete-filled-steel-tube columns with external confinement vol.3, pp.6, 2012, https://doi.org/10.12989/eas.2012.3.6.889