DOI QR코드

DOI QR Code

Ultimate load behavior of horizontally curved composite plate girders

  • Shanmugam, N.E. (Department of Civil and Structural Engineering, University Kebangsaan Malaysia) ;
  • Basher, M.A. (Department of Civil and Structural Engineering, University Kebangsaan Malaysia) ;
  • Khalim, A.R. (Department of Civil and Structural Engineering, University Kebangsaan Malaysia)
  • Received : 2008.10.10
  • Accepted : 2009.04.16
  • Published : 2009.07.25

Abstract

This paper is concerned with steel-concrete composite plate girders curved in plan. At the design stage these girders are assumed sometimes to act independent of the deck slabs resting on them in order to simplify the analysis. The advantage of composite action between the steel girders and concrete deck is not utilized. Finite element modeling of such composite action in plate girders is considered in this paper. Details of the finite element modeling and the non-linear analysis of the girders are presented along with the results obtained. Tension field action in the web panels similar to those observed in the straight plate girders is also noticed in these girders. Finite element and experimental results in respect of curved steel plate girders and straight composite plate girders tested by other researchers are presented first to assess the accuracy of the modeling. Effects of parameters such as curvature, steel flange width and web panel width that affect the behavior of composite girders are then considered in the analyses. An approximate method to predict the ultimate strength of horizontally curved composite plate girders is also presented.

Keywords

References

  1. AASHTO (2004), LRFD bridge design specifications, 3rd ed. 2005 Interim provisions, Washington (DC): American Association of State and Highway Transportation Officials.
  2. Allison, R.W., Johnson, R.P. and May, I.M. (1982), "Tension field action in composite plate girders", Proc. of the Instn. of Civil Engrs, London, 73(2), 255-276. https://doi.org/10.1680/iicep.1982.1700
  3. Baskar, K. and Shanmugam, N.E. (2003), "Steel-concrete Composite Plate Girders Subject to Combined Shear and Bending", J. Constr. Steel Res., 59(4), 531-557. https://doi.org/10.1016/S0143-974X(02)00042-1
  4. Bradford, M.A., Uy, B. and Pi, Y.L. (2001), "Behaviour of unpropped composite girders curved in plan under construction loading", Eng. Struct., 23, 779-789. https://doi.org/10.1016/S0141-0296(00)00097-3
  5. Evans, H.R., Porter, D.M. and Rockey, K.C. (1978), "The collapse behavior of plate girders subjected to shear and bending", Int. Ass. Bridge Struct. Eng, periodical, proc., P-18/78.
  6. FEA Ltd. (2003), LUSAS, User Manual Version 13.7, Surrey, UK.
  7. Hall, D.H. (1996), "Curved girders are special", Eng. Struct., 18(10), 769-777. https://doi.org/10.1016/0141-0296(96)00012-0
  8. Jung, S.K. and White, D.W. (2006), "Shear strength of horizontally curved steel I girdersfinite element analysis studies", J. Constr. Steel Res., 62(4), 329-342. https://doi.org/10.1016/j.jcsr.2005.08.003
  9. Lian, V.T. and Shanmugam, N.E. (2003), "Openings in Horizontally Curved Plate Girders", Thin-Wall. Struct., 41(2-3), 245-269. https://doi.org/10.1016/S0263-8231(02)00090-3
  10. Lian, V.T. and Shanmugam, N.E. (2004), "Design of Horizontally Curved Plate Girder Webs Containing Circular Openings", Thin-Wall. Struct., 42(5), 719-739. https://doi.org/10.1016/j.tws.2003.12.007
  11. Laane, A. and Lebet, J.P. (2005), "Available rotation capacity of composite bridge plate girders under negative moment and shear", J. Constr. Steel Res., 61, 305327. https://doi.org/10.1016/j.jcsr.2004.09.002
  12. Porter, D.M., Rockey, K.C. and Evans, H.R. (1975), "The collapse behavior of plate girders loaded in shear", Struct. Eng., 53(8), 313-325.
  13. Pytel, A. and Singer, F.L. (1987), Strength of Materials, 4th edition, Harpercollins College Div, New York.
  14. Shanmugam, N.E. and Baskar, K. (2003), "Steel-concrete Composite Plate Girders Subject to Shear loading", J. Struct. Eng. ASCE, 129(9), 1230-1242. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:9(1230)
  15. Shanmugam, N.E. and Baskar, K. (2006), "Design of Composite Plate Girders under Shear Loading", Steel Compos. Struct., 6(1), 1-14. https://doi.org/10.12989/scs.2006.6.1.001
  16. Shanmugam, N.E., Mahendrakumar, M. and Thevendran, V. (2003), "Ultimate Load Behaviour of Horizontally Curved Plate Girders", J. Constr. Steel Res., 49(4), 509-529.
  17. Zureick, A.H., White, D.W., Phoawanich, N. and Park, J. (2002), "Shear strength of horizontally curved steel I girders-experimental tests", Final report to Professional Services Industries, Inc. and Federal Highway Administration.

Cited by

  1. Free vibration characteristics of horizontally curved composite plate girder bridges vol.10, pp.4, 2010, https://doi.org/10.12989/scs.2010.10.4.297
  2. Web Buckling and Ultimate Strength of Composite Plate Girders Subjected to Shear and Bending vol.15, pp.02, 2015, https://doi.org/10.1142/S0219455414500473
  3. Behaviour of partially connected composite plate girders containing web openings vol.72, 2013, https://doi.org/10.1016/j.tws.2013.06.022
  4. Horizontally curved composite plate girders with trapezoidally corrugated webs vol.67, pp.6, 2011, https://doi.org/10.1016/j.jcsr.2011.01.015
  5. An approximate method for the ultimate shear strength of horizontally curved composite plate girders vol.20, pp.3, 2014, https://doi.org/10.3846/13923730.2013.801913
  6. Analysis, design and construction of curved composite girder bridges: State-of-the-art vol.10, pp.3, 2010, https://doi.org/10.1007/BF03215831
  7. Tests of partially connected composite plate girders vol.91, 2015, https://doi.org/10.1016/j.tws.2015.01.024