Steel and Composite Structures

  • 제9권4호
  • /
  • Pages.303-323
  • /
  • 2009
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

EN 1991-2 traffic loads design charts for closed rib orthotropic deck plate based on Pelikan-Esslinger method

  • Vlasic, Andjelko (Faculty of Civil Engineering, University of Zagreb) ;
  • Radic, Jure (Faculty of Civil Engineering, University of Zagreb) ;
  • Savor, Zlatko (Faculty of Civil Engineering, University of Zagreb)
  • 투고 : 2008.11.07
  • 심사 : 2009.02.05
  • 발행 : 2009.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Charts for the bending moments in the closed rib orthotropic deck plate are derived, based on the method originally introduced by Pelikan and Esslinger. New charts are done for EN 1991-2 traffic load distribution schemes. The governing Huber plate equation is solved utilizing Fourier series for various bridge deck plate boundary conditions. Bending moments are given as a function of deck plate rigidities and span length between cross beams. Old diagrams according to DIN 1072, the new ones according to EN 1991-2 and FE analyses results are compared. For typical bridge orthotropic deck plates, it can be concluded that the new EN 1991-2 traffic loads produce larger mid-span bending moments when two lane schemes are used, then those of DIN 1072. For support moments, DIN 1072 gives larger values for any number of lanes, especially under span lengths of 5m. The relevant differences are up to 25%.

키워드

참고문헌

  1. EN 1991-2 (2003), Actions on structures Part 2: Traffic loads on bridges, September 2003.
  2. Gauger, H.U. and Oxford, J. (1983), Erweiterung der Berechnung von Stahlfahrbahnen mit torsionssteifen Langstragern fur die Bruckenklasse 60/30, Der Stahlbau, 52(12), 353-358 (In German).
  3. Horvatic, D. (1977), Bridges with orthotropic plates-theory, construction calculation and erection, Civil Engineering Faculty University of Zagreb, Zagreb 1977.
  4. Horvatic, D. and Savor, Z. (1998), Steel bridges, Croatian Society of Structural Engineers (CSSE), Zagreb 1998.
  5. Pelikan, W. and Esslinger, M. (1957), Die Stahlfahrbahn Berechnung und Konstruktion, MAN-Forschungsheft.
  6. Troitsky, M.S. (1967), Orthotropic Bridges Theory and Design, The James F. Lincoln Arc Welding Foundation, U.S.A., 1967.

피인용 문헌

  1. Fatigue Damage Evaluation of Orthotropic Steel Deck Considering Weld Residual Stress Relaxation Based on Continuum Damage Mechanics vol.23, pp.10, 2018, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001280
  2. Fatigue property analysis of U rib-to-crossbeam connections under heavy traffic vehicle load considering in-plane shear stress vol.38, pp.3, 2009, https://doi.org/10.12989/scs.2021.38.3.271