Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

Formability Evaluation of a Copper Alloy for Regenerative Cooling Thrust Chamber

재생냉각 연소기 챔버 제작용 구리합금의 성형성 평가

  • 유철성 (한국항공우주연구원 연소기팀) ;
  • 이금오 (한국항공우주연구원 연소기팀) ;
  • 최환석 (한국항공우주연구원 연소기팀)
  • Published : 2009.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

The dome stretching tests and tension tests have been performed to obtain a forming limit curve(FLC) for the copper alloy which is used for manufacturing the regenerative cooling thrust chamber. For experimental investigation of the forming limit curve, we have used in-plane tension specimen to obtain tension-compression strain state as well as out-of-plane specimen to obtain tension-tension strain state through dome stretching test. All specimens were divided into longitudinal and transverse directions according to the orientation of test specimen. The test results showed that in the tension-tension region, copper alloy revealed a maximum major strain of 62.3% and a maximum minor strain of 58.6%. In the tension-compression region, the maximum major strain and the maximum minor strain were measured to be 60.5% and 25.8%, respectively.

액체로켓 연소기 재생냉각 챔버의 제작에 사용되는 구리합금의 성형한계 곡선을 얻기 위하여 돔 장출 시험과 인장시험을 수행하였다. 성형한계 곡선에 대한 실험적인 연구를 위하여 인장시편을 사용하여 인장-압축 변형률 상태의 데이터를 얻었으며, 인장-인장의 변형률 상태를 얻기 위하여 돔 장출 시험용 시편을 사용한 돔 장출 시험 또한 수행하였다. 시험에 사용한 모든 시편은 제작방향에 따라 종 방향과 횡 방향시편으로 구분하였다. 시험 결과 인장-인장 변형률 상태에서 최대 주 변형률과 부 변형률은 62.3%와 58.6%이며, 인장-압축 상태에서는 60.5%와 25.8%로 나타났다.

Keywords

References

  1. R. Wang, Dai Kun, and Fang Yi, "Themethod of the principal shear stress tracingline and its application in the flaring andexpanding of a thin-walled tube with a conicalpunch", Journal of Material ProcessingTechnology, Vol. 70, 1997, pp. 220-227 https://doi.org/10.1016/S0924-0136(97)00065-4
  2. Z. C. Sun and H. Yang, "Freedeformation mechanism and change of formingmode in tube inversion under conical die",Journal of Meterials Processing Technology,Vol. 177, 2006, pp. 171-174 https://doi.org/10.1016/j.jmatprotec.2006.03.198
  3. M. L. Alves, and et. al, "End forming ofthin-walled tubes", Journal of MaterialsProcessing Technology, Vol. 177, 2006, pp.183-187 https://doi.org/10.1016/j.jmatprotec.2006.04.040
  4. Yuung-Hwa Lu, "Study of tube flaringratio and strain rate in the tube flaringprocess", Finite Elements in Analysis andDesign, Vol. 40, 2004, pp. 305-318 https://doi.org/10.1016/S0168-874X(03)00049-0
  5. Y. -M. Huang and Y. -M. Hung,"Elasto-plastic Finite-Element Analysis of theAxisymmetric Tube Flaring Process withConical Punch", International Journal ofAdvanced Manufacturing Technology, Vol. 18,2001, pp. 390-398 https://doi.org/10.1007/s001700170048
  6. You-Min Huang and Yuung-Ming Huang,"An Elasto-Plastic Finite Element Analysis ofthe Axisymmetrical Tube-Nosing Process witha Conical Tool", Key Engineering Materials,Vols. 233-236, 2003, pp. 371-376 https://doi.org/10.4028/www.scientific.net/KEM.233-236.371
  7. T. Daxner, F. G. Rammerstorfer, F. D.Fischer, "Instability phenomena during theconical expansion of circular cylindrical shells",Comput. Methods Appl. Mech. Engrg. Vol.194, 2005, pp. 2591-2603 https://doi.org/10.1016/j.cma.2004.07.047
  8. F. D. Fischer, F. G. Rammerstorfer, T.Daxner, "Flaring-An analytical approach",International Journal of Mechanical Sciences,Vol. 48, 2006, pp. 1246-1255 https://doi.org/10.1016/j.ijmecsci.2006.06.004
  9. S. P. Keeler and Backofen, "PlasticInstabiliity and Fracture in Sheets Stretchedover Rigid Punches", Transaction of the ASM,Vol. 56, 1963, pp. 25-48
  10. V. M. Nandedkar and K. Narasimhan,"Measurement of strain heistrory during thestretching of forming-grade sheets", Journal ofMaterial Processing Technology, Vol. 89-90,1999, pp. 24-29 https://doi.org/10.1016/S0924-0136(99)00074-6
  11. Siegfried S. Hecker, "Simple techniquefor determining forming limit curves", SheetMetal Industries, 1975, pp. 671-676
  12. V. Buakaew, S. Sodamuk and S.Sirivedin, "Formability Prediction ofAutomotive Parts Using Forming LimitDiagrams", Journal of Solid Mechanics andMaterials Engineering, Vol. 1, 2007, pp. 691-698 https://doi.org/10.1299/jmmp.1.691
  13. Fahrettin Ozturk and Daeyong Lee,"Experimental and numerical analysis ofout-of-plane formability test", Journal ofMaterials Processing Technology, Vol. 170,2005, pp. 247-253 https://doi.org/10.1016/j.jmatprotec.2005.05.010
  14. A. R. Ragab, "Forming Limit Curves:Out-of-plane and In-plane Stretching", Journalof Mechnical Working Technology, Vol. 6,1982, pp. 267-276 https://doi.org/10.1016/0378-3804(82)90027-4
  15. M. M. Moshksar, S. Mansorzadeh,"Determination of the forming limit diagram forAl 3105 sheet", Journal of Materials ProcessingTechnology, Vol. 141, 2003, pp. 138-142 https://doi.org/10.1016/S0924-0136(03)00262-0
  16. Takaaki IGUDHI, "Ductile Forming LimitStress in Sheet Forming Processes with NonlinearStrain Path Involving Out-of-plane Forming", ISIJInternational, Vol. 47, 2007, pp. 502-509 https://doi.org/10.2355/isijinternational.47.502
  17. Takaaki IGUCHI and Jun YANAGIMOTO, "Measurement of Ductile Forming Limit in Non-linear Strain Paths and Anisotropic Yield Conditions for 11% Cr Steel Sheets", ISIJ International, Vol. 47, 2007, pp. 122-130 https://doi.org/10.2355/isijinternational.47.122
  18. Haroldo Beria Campos and et al.,"Theorical and experimental determination ofthe forming limit diagram for the AISI 304stainless steel", Journal of Material ProcessingTechnology, Vol. 179, 2006, pp. 56-60 https://doi.org/10.1016/j.jmatprotec.2006.03.065
  19. J. K. Lee, G. L. Kinzel and R. H.Wagoner(Eds), "NUMISHEET '96 3rd Int.Conference on Numerical Simulation of 3-Dsheet Metal Forming Processes, Verification ofSimulation with Experiments", 29 September -3` October 1996, Dearborn, Michigan
  20. M. Aghaie-Khafri and R. Mahmudi,"Predicting of plastic instability and forminglimit diagrams", International Journal ofMechanical Sciences, Vol. 46, 2004, pp.1289-1306 https://doi.org/10.1016/j.ijmecsci.2004.08.009

Cited by

  1. Development of Spinning Process for Manufacturing Liquid Rocket Engine Thrust Chamber vol.18, pp.6, 2014, https://doi.org/10.6108/KSPE.2014.18.6.088