Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지

Impact and Wear Behavior of Side Plate of FRP Ship

FRP선박 외판재의 충격 및 마모 거동

  • 김형진 (경상대학교 기계항공공학부, 해양산업연구소) ;
  • 김재동 (경상대학교 해양산업연구소) ;
  • 고성위 (부경대학교 기계공학부) ;
  • 김영식 (부경대학교 기계공학부)
  • Published : 2009.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of temperature and initial crack length on the impact fracture behavior for the side plate material of FRP ship were investigated. And the effects of the counterpart roughness and sliding distance on the volumetric wear of same material were investigated as well. Impact fracture toughness of GF/PE composites displayed maximum value when the temperature of specimen is room temperature and $50^{\circ}C$, and with decreasing the temperature of specimen, impact fracture toughness decreased. Impact fracture energy of GF/EP composites decreased with increasing the initial crack length of specimen, and this value decreased rapidly when the temperature of specimen is lowest, $-25^{\circ}C$. It is believed that sensitivity of notch on impact fracture energy were increased with decreasing the temperature of specimen. With increasing the sliding distance, the transition sliding distance, which displayed different aspect on the friction coefficient and the volumetric wear loss, were found out. Counterpart roughness had a big influence on the wear rate at running in period, however the effect of counterpart roughness became smaller with sliding speed increase in. Volumetric wear loss were increased with increasing the applied load and the counterpart roughness.

Keywords

References

  1. A. Q. Mateen and S. A. Siddiqi, 1989, "Impact Properties of Polyuretane and Glass Fibres Reinforced Composites", J. Mat. Sci. 24, pp. 4516-4524. https://doi.org/10.1007/BF00544538
  2. G. Fernando, G. R. Dickson, 1988, T. Anderson, H. Reiter, and B. Harris, "Fracture of Hybrid Composites : part 1", J. Mat. Sci. 23, pp. 3732-3743. https://doi.org/10.1007/BF00540521
  3. F. Famsteiner and R. Theysohn, 1979, "Tensile and Impact Strengths of Unidirectional, Short Fiber-Reinforced Thermoplastics", Composites, pp. 111-119. https://doi.org/10.1016/0010-4361(79)90012-0
  4. S. W. Koh, J. K. Kim and Y. M. Mai, 1993, "Fracture Toughness and Failure Mechanisms in Silica-Filled Epoxy Resin Composites : Effects of Temperature and Loading Rate", Polymer 34, pp. 3446-3455. https://doi.org/10.1016/0032-3861(93)90474-O
  5. 고성위, 1993, "온도변화에 따른 실리카 입자강화 복합재료의 기계적 성질 및 파괴거동", 한국복합재료학회지, 6(2), pp. 52-60.
  6. M. B. Perterson, 1980, "Design Consideration for Effective Wear Control", Wear Control Handbook ASME Centennial Research Project, pp. 413-434.
  7. 문한규, 이해수, 김종집, 한준희, 1987, "마모시험", 재료시험법, 한국표준연구소, pp. 228-314.
  8. 고성위, 양병춘, 김형진, 김재동, 2006, "탄소 섬유 강화 고분자 복합재의 연삭마모 특성에 관한 연구", 한국동력기계공학회지, 제10권 제1호, pp. 46-51.
  9. Z. F Zhang, L. C. Zhang and Y. W. Mai, 1995, "Wear of ceramic partocle-reinforced metalmatrix composites Part II A model of adhesive wear", J. of materials Science, Vol. 30, pp. 1967-1971. https://doi.org/10.1007/BF00353019
  10. S. W. K, et al., 2007, "Effect of Load upon the Abrasive Wear Sillica-Epoxy Resin Composite", Materials Science Forum, Vol. 544-545, pp. 255-258. https://doi.org/10.4028/www.scientific.net/MSF.544-545.255
  11. Z. F Zhang, L. C. Zhang and Y. W. Mai, 1995, "Wear of ceramic partocle-reinforced metalmatrix composites Part I Wear mechanisms", J. Mat. Sci., Vol. 30, pp. 1961-1966. https://doi.org/10.1007/BF00353018
  12. J. D. Kim, H. J. Kim and S. W. Koh, 2006, "Wear Characteristics of Particulate Reinforced Metal Matrix Composites by a Pressureless Metal Infiltration Process", Materials Science Forum, Vol 510-511, pp. 234-237. https://doi.org/10.4028/www.scientific.net/MSF.510-511.234
  13. G. P. Mashall, J. G. Williams and C. E. Turner, 1973, "Fracture Toughness and Absorbed Energy Measurements in Impact Test on Brittle Materials", J. Mat. Sci., Vol 8, pp. 949-956. https://doi.org/10.1007/BF00756625
  14. J. J. Selsing, 1961, Am. Ceram. Soc. 44, pp. 419. https://doi.org/10.1111/j.1151-2916.1961.tb15475.x
  15. R. H. Toland, 1972, "Failure Mode in Impact-Loaded Composite Materials", Symposium on Failure Modes in Composites, AIME Spring Meeting, Ma., pp. 150-158.