THE EFFECT OF SURFACE ROUGHNESS OF CSI(TL) MICRO-COLUMNS ON THE RESOLUTION OF THE X-RAY IMAGE; OPTICAL SIMULATION STUDY

  • Kim, Hyun-Ki (Radiation Detection and Medical Imaging Lab, Dept. of Nucl. and Quant. Engineering, KAIST) ;
  • Bae, Jun-Hyung (Radiation Detection and Medical Imaging Lab, Dept. of Nucl. and Quant. Engineering, KAIST) ;
  • Cha, Bo-Kyung (Radiation Detection and Medical Imaging Lab, Dept. of Nucl. and Quant. Engineering, KAIST) ;
  • Jeon, Ho-Sang (Radiation Detection and Medical Imaging Lab, Dept. of Nucl. and Quant. Engineering, KAIST) ;
  • Kim, Jong-Yul (Radiation Detection and Medical Imaging Lab, Dept. of Nucl. and Quant. Engineering, KAIST) ;
  • Kim, Chan-Kyu (Radiation Detection and Medical Imaging Lab, Dept. of Nucl. and Quant. Engineering, KAIST) ;
  • Cho, Gyu-Seong (Radiation Detection and Medical Imaging Lab, Dept. of Nucl. and Quant. Engineering, KAIST)
  • 발행 : 2009.03.30

초록

Micro-columnar CsI(Tl) is the most popular scintillator material which is used for many indirect digital X-ray imaging detectors. The light scattering at the surface of micro-columnar CsI(Tl) scintillator was studied to find the correlation between the surface roughness and the resultant image resolution of indirect X-ray imaging detectors. Using a commercially available optical simulation program, Light Tools, MTF (Modulation Transfer Function) curves of the CsI(Tl) film thermally evaporated on glass substrate with different thickness were calculated and compared with the experimental estimation of MTF values by the edge X-ray image method and CCD camera. It was found that the standard deviation value of Gaussian scattering model which is determined by the surface roughness of micro-columns could certainly change the MTF value of image sensors. This model and calculation methodology will be beneficial to estimate the overall performance of indirect X-ray imaging system with CsI(Tl) scintillator film for optimum design depending on its application.

키워드

참고문헌

  1. Kim BJ, Cha BK, Jeon H, Chi YK, Cho G. A study on spatial resolution of pixelated CsI(Tl) scintillator. Nuclear Instruments and Methods in Physics Research A2007;579(1):205-207 https://doi.org/10.1016/j.nima.2007.04.040
  2. Tawa N, Ikegami K, Aono M, Miyata E, and Tsunemi H.Spectral Capability Evaluation of Thick Needlelike CsI(Tl)for Scintillator Directly Coupled Charge-Coupled Device.Japanese Journel of Applied Physics, 2007;46(2):873-879 https://doi.org/10.1143/JJAP.46.873
  3. Optical Research Associates. Light Tools. http://www.opticalres.com/
  4. Rocha JG, Correia JH, Lanceros-Mendez S. Modeling of the performance of scintillator based X-ray detectors. IEEE sensors, 2004:1257-1260
  5. Kurita M and Hara K. Optical Measurement of Two-Dimensional Surface Roughness and Texture using a Scattered Light Intensity Distribution. Key Engineering Materials, 2004;270-273:768-774 https://doi.org/10.4028/www.scientific.net/KEM.270-273.768
  6. Cayouette F, Moisan C and Thomson CJ. Monte-Carlo Modeling of Scintillation Crystal Performance for Stratified PET Detectors using DETECT2000. IEEE 2001 Conference Record, 2001:M13A-21 https://doi.org/10.1109/TNS.2002.1039539
  7. Nagarkar VV, Gupta TK, Miller SR, Klugeman Y, SquillanteMR, and Entine G. Structured CsI(T1) Scintillators for XrayImaging Applications. IEEE Trans. Nucl. Sci.,2008;45:492-496 https://doi.org/10.1109/23.682433
  8. Zhao W, Ristic G and Rowlands JA. Inherent imaging performance of Cesium Iodide scintillators. Proc. SPIE,2004;5368:211–220.30 JOURNAL https://doi.org/10.1117/12.536865