Evaluation and Determination of Air Void for Asphalt Concrete using a dielectric constant measurement

유전율 측정을 통한 아스팔트 콘크리트의 공극률 추정 연구

  • Published : 2009.03.15

Abstract

This study was conducted to evaluate the relationship between the dielectric constant and air void of asphalt concrete. Standard specimens that have air voids of various range $(0%{\sim}20%)$ were used to measure the dielectric constant using parallel plate method that measures low frequency dielectric constant. From the tests, dielectric constant of asphalt concrete was tend to decrease as the frequency was increased, and the decrement slope was varied with the types of asphalt binders. Dielectric constant was decreased linearly as air void was increased from zero to twenty percent. Consequently, the effect of temperature and moisture content on dielectric constants of asphalt concrete was evaluated to develop the standard curve between dielectric constant and air void of asphalt concrete. The standard curve developed in this study can be used to calibrate or develop the algorithm of non-destructive density gauge.

본 연구는 아스팔트 콘크리트의 유전율과 공극률의 상관성을 평가하기 위해 수행되었다. 이를 위해 다양한 범위 $(0%{\sim}20%)$의 공극률을 갖는 아스팔트 콘크리트 시편을 제작하였고, 저주파 유전율 측정법인 parallel plate법을 사용하여 아스팔트 콘크리트 시편의 유전율을 측정하였다. 아스팔트 콘크리트 시편의 경우 주파수가 증가함에 따라 유전율은 감소하는 경향을 나타내었고, 사용한 아스팔트 바인더의 종류에 따라 그 감소폭이 다르게 나타났다. 또한 공극률 $0%{\sim}20%$ 사이에서 공극률이 증가함에 따라 유전율 값은 선형적으로 감소하는 경향을 보였다. 더불어 아스팔트 콘크리트 시편의 유전율에 대한 온도 및 함수량 영향을 보정하여 유전율에 따른 공극률의 상관식을 제시하였다. 본 연구를 통해 제시된 아스팔트 콘크리트의 유전율과 공극률의 상관식은 현재 국내외에서 사용하고 있는 유전율을 활용한 비파괴 밀도 측정장비의 보정모델로 활용 가능하며, 향후 국내에서 개발하고자 하는 아스팔트 포장 비파괴 밀도 측정장비의 기본적인 알고리즘으로 활용이 가능할 것이다.

Keywords

References

  1. 김만일, 니시가끼 마코토, "유전율법을 이용한 다공질 매질의 공극률 및 유효공극률의 측정에 관한 연구," The Journal of Engineering Geology, Vol.13, No.4, December, 2003, pp. 419-428.
  2. A. C. Rust, J. K. Russell, R. J. Knight (1999), Dielectric constant as a predictor of porosity in dry volcanic rocks. Journal of Volcanology and Geothermal Research, 91, pp79-96. https://doi.org/10.1016/S0377-0273(99)00055-4
  3. A. J. Moulson and J. M. Herbert (2003), "Electroceramics: Materials Properties, Applications." 2nd Edition, Chapter 5. Dielectrics and Insulators.
  4. D. J. Bergman and D. Stroud (1992), "Advances in Research and Applications: Solid State Physics", (Academic, New York, 1992), Vol. 46, pp. 147-269 https://doi.org/10.1016/S0081-1947(08)60398-7
  5. Edward J. Jaselskis, Jonas Grigas and Algirdas Brilingas (2003), Dielectric properties of asphalt pavement, Journal of materials in civil engineering, 15, pp 427-434. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:5(427)
  6. Freddy L. Roberts (1996), "Hot Mix Asphalt Materials, Mixture Design, and Construction." Second Edition, Chapter6. Equipment and Construction.
  7. G. Kent (1996) Nondestructive Permittivity Measurement of Substrates, IEEE Transactions on Instrumentation and Measurement. 45, pp. 102-106. https://doi.org/10.1109/19.481319
  8. US Army Corp of Engineers, (2000), 'Hot-Mix Asphalt Paving Handbook 2000," Part III Hot-MIX Asphalt Laydown and Compaction.