References
- 강현식, 유영찬, 문태섭 (2000) 각형 CFT 단주의 하중-변형도모델, 한국강구조학회 논문집, 제12권 제1호, pp. 9-16
- 윤복희, 이은택, 박지영, 장경호 (2004) 구속효과를 고려한 콘크리트 충전 원형 강관의 비틀림 거동, 한국강구조학회 논문집, 제16권 제5호, pp. 529-541
- 한국강구조학회 (2003) 콘크리트충전 강관구조 설계 및 시공지침
- 한국콘크리트학회 (2004) 콘크리트구조설계기준 해설
- 한택희, 염응준, 한상윤, 강영종 (2007) 구속효과를 고려한 내부구속 중공 CFT 부재의 비선형 콘크리트 모델 개발, 한국강구조학회 논문집, 제19권 제1호, pp. 43-52
- 황원섭, 김동조 (2002) 콘크리트 구속효과를 고려한 정사각형 CFT단주의 강도, 한국강구조학회 논문집, 제14권 제6호, pp.813-822
- American Institute of Steel Construction (1998) Load and Resistance Factored Design : Manual of Steel Construction, Vol. 1
- Architectural Institute of Japan (AIJ) (1985) Design Recommendations for Composite Constructions
- Canadian Standard Association (CSA) (1994) Limit State Design of Steel Structures (CAN/CSA-S16.1-94), Clause 18, Rexdale, Ontario
- Elremaily, A., Aziznamini, A. (2002) Behavior and Strength of Circular Concrete-Filled Tube Columns, Journal of Constructional Steel Research, Vol. 58, pp. 1567-1591 https://doi.org/10.1016/S0143-974X(02)00005-6
- Fam, A., Qie, F.S., Rizkalla, S. (2004) Concrete-Filled Steel Tubes Subjected to Axial Compression and Lateral Cyclic Loads, Journal of Structural Engineering, ASCE, pp. 631-640 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(631)
- Fujimoto, T., Mukai, A., Nishiyama, I., Sakino, K. (2004) Behavior of Eccentrically Loaded Concrete-Filled Steel Tubular Columns, Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 203-212 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(203)
- Hajjar, J.F., Gourley, B.C., Olson, M.C. (1997) A Cyclic Nonlinear Model for Concrete-Filled Tubes. II: Verification, Journal of Structural Engineering, ASCE, Vol. 123, No. 6, pp. 745-754 https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(745)
- Hu, H.T., Huang, C.S., Chen, Z.L. (2005) Finite Element Analysis of CFT Columns Subjected to an Axial Compressive Force and Bending Moment in Combination, Journal of Constructional Steel Research, Vol. 61, pp. 1692-1712 https://doi.org/10.1016/j.jcsr.2005.05.002
- Kato, B. (1996) Column Curves of Steel-Concrete Composite Members, Journal of Constructional Steel Research, Vol. 39, No. 2, pp. 121-135 https://doi.org/10.1016/S0143-974X(96)00030-2
- Kilpatrick A.E., Ranagan B.V. (1997) Deformation-control analysis of composite concrete columns, Research Report No. 3/97, School of Civil Engineering, Curtin University of Technology, Perth, Western Australia
- Knowles, R., Park, R. (1996) Axial Load Design for Concrete Filled Steel Tubes, Journal of Structural Division, ASCE, ST10, pp. 2125-2153
- Mander, J.B., Priestly, M.J.N., Park, R. (1988) Theoretical Stress-Strain Model for Confined Concrete, Journal of Structural Engineering, ASCE, Vol. 114, No. 8, pp. 1804-1826 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
- O'Shea, M.D., Bridge, R.Q. (2000) Design of Circular Thin-Walled Concrete Filled Steel Tubes, Journal of Structural Engineering, ASCE, Vol. 126, No. 11, pp. 1295-1303 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
- Park R. (1988) Ductility Evaluation from Laboratory and Analytical Testing, Proceeding of Ninth World Conference on Earthquake Engineering, Tokyo, Japan, Vol.8
- Popovics, S., (1973) A Numerical Approach to the Complete stressstrain curves of concrete, Cement and Concrete Research, Vol. 3, No. 5, pp. 583-599 https://doi.org/10.1016/0008-8846(73)90096-3
- Sugano, S., Nagashima, T. (1992) Seismic Behavior of Concrete Filled Tubular Steel Columns, 10th Structural Congress 92, ASCE, pp. 914-917
- Xiao, Y., He, W., Choi K.K. (2005) Confined Concrete-Filled Tubular Columns, Journal of Structural Engineering, ASCE, Vol. 131, No. 3, pp. 488-497 https://doi.org/10.1061/(ASCE)0733-9445(2005)131:3(488)