Journal of ILASS-Korea (한국분무공학회지)

Institute for Liquid Atomization and Spray Systems-Korea (한국분무공학회)
권호 표지

Experimental Study on Spray Cooling Heat Transfer of Micro-Fins Surfaces

마이크로 휜 표면의 분무냉각 열전달에 관한 실험적 연구

  • 김영찬 (안동대학교 기계공학부)
  • Published : 2009.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Spray cooling heat transfer was experimentally investigated for water sprays impacting on mico-fins structured surfaces in the single phase and nucleate boiling regions. The heat transfer surfaces consist of cubic fins and triangular grooved fins. The spray produced using full cone spray nozzles, and experiments were made under the test condition of $Q=4.92{\times}10^{-6}{\sim}15.83{\times}10^{-6}\;m^3/s$, $T_f=35{\sim}55^{\circ}C$. From the experimental results, it was found that cubic fins surface had the largest heat flux enhancement relative to the smooth surface.

Keywords

References

  1. S. Toda, "A Study of Mist Cooling (1st Report: Investigation of Mist Cooling)", Heat Transfer Japanese Research, Vol. 1, 1972, pp.39-52.
  2. Muller, H. and Jescher, R., "Investigation of the Heat Transfer in a Simulated Secondary Cooling Zone in the Continuous Casting Process", Arch Eisenhuttenwes, VoI.44-8, 1973, pp. 589-594.
  3. L. Bolle and J.C. Moureau, "Spray Cooling of Hot Surface", Two-Phase Flow and Heat Transfer Proc. NATO Advanced Study Institute, Vol. 3, 1977, pp.1327-1346.
  4. Y. C. Kim, S. Nishio and H. Ohkubo, "Spray Cooling with Formation of Liquid Film Flow: Distribution of Heat Transfer Coefficient in High Temperature Region", Trans. of the JSME, Vol. 60-574, 1994, pp.2158-2164. https://doi.org/10.1299/kikaib.60.2158
  5. T. M. Anderson and I. Mudawar, "Micro-Electronic Cooling by Enhanced Pool Boiling of a Dielectric Fluorocarbon Liquid", ASME J. of Heat Transfer, Vol.111, 1989, pp. 752- 759. https://doi.org/10.1115/1.3250747
  6. W. Qu and I. Mudawar, "Flow Boiling Heat Transfer in Two-Phase Micro-Channel Heat Sink", Int. J. of Heat & Mass Transfer, Vol.46, 2003, pp.2755-771. https://doi.org/10.1016/S0017-9310(03)00041-3
  7. D. C. Wadsworth, and I. Mudawar, "Cooling of Multichip Electronic Module by Means of Confined Two-Dimensional Jets of Dielectric Liquid", ASME J. of Heat Transfer, Vol. 112, 1990, pp.891-898. https://doi.org/10.1115/1.2910496
  8. K. A. Estesand and I. Mudawar, "Correlation of Sauter Mean Diameter and Critical Heat Flux for Spray Cooling of Small Surfaces", Int. J. of Heat & Mass Transfer, Vol. 38-16, 1995, pp.2985-2996. https://doi.org/10.1016/0017-9310(95)00046-C
  9. H. Honda, H. Takamastu and J. J. Wei, "Enhanced Boiling of FC-72 on Silicon Chips With Micro-Pin-Fins and Submicron-Scale Roughness", ASME J. of Heat Transfer, Vol. 124, 2002, pp. 383-390. https://doi.org/10.1115/1.1447937
  10. J. H. Kim, S. M. You and Stephen U. S. Choi, "Evaporative Spray Cooling of Plain and Microporous Coated Surfaces",lnt. J. of Heat & Mass Transfer, Vol.47, 2004, pp.3307-3315. https://doi.org/10.1016/j.ijheatmasstransfer.2004.01.018
  11. C. C. Hsieh and S. C. Yao, "Evaporative Heat Transfer Characteristics of a Water Spray on Micro-Structured Silicon Surfaces", Int. J. of Heat & Mass Transfer, Vol.49, 2006, pp.962-974. https://doi.org/10.1016/j.ijheatmasstransfer.2005.09.013
  12. Eric C. Silk, J. Kim and K. Kiger, "Spray Cooling of Enhanced Surfaces (Impact of Structured Surface Geometry and Spray Axis Inclination)", Int. J. of Heat & Mass Transfer, Vol.49, 2006, pp.4910-49-20. https://doi.org/10.1016/j.ijheatmasstransfer.2006.05.031
  13. C. Sodtke and P. Stephan, "Spray Cooling on Micro Structured Surfaces", Int. J. of Heat & Mass Transfer, Vol.49, 2007, pp.4089-4097.
  14. Y. C. Kim, "Study on Boiling Heat Transfer of FC-77 in Spray Cooling", J. of ILASS-KOREA, Vol. 12-4, 2007, pp.179- 184.