참고문헌
- Jonsson M. and Yan j., 2005, Humidified gas turbines - a review of proposed and implemented cycles, Energy, Vol. 30, pp. 1013-1078 https://doi.org/10.1016/j.energy.2004.08.005
- Chaker M., Meher-Homji C. B., and Mee III T., 2004, Inlet fogging of gas turbine engines - Part I: Fog droplet thermodynamics, heat transfer and practical considerations, ASME J. of Engineering for Gas Turbines and Power, Vol. 126, pp. 545-558 https://doi.org/10.1115/1.1712981
- White A. J. and Meacock A. J., 2004, An evaluation of the effects of water injection on compressor performance, ASME J. of Eng. Gas Turbines and Power, Vol. 126, pp. 748-754 https://doi.org/10.1115/1.1765125
- Kim K. H. and Perez-Blanco H., 2006, An assessment of high-fogging potential for enhanced compressor performance, ASME paper No. GT2006-90482, Barcelona
- Perez-Blanco H., Kim K. H., and Ream S., 2007, Evaporatively-cooled compression using a highpressure refrigerant, Applied Energy, Vol. 84, pp. 1028-1043 https://doi.org/10.1016/j.apenergy.2007.02.013
- Kim K. H. and Perez-Blanco H., 2007, Potential of regenerative gas-turbine systems with high fogging compression, Applied Energy, Vol. 84, pp. 16-28 https://doi.org/10.1016/j.apenergy.2006.04.008
- Bassily A. M., 2001, Effects of evaporative inlet and aftercooling on the recuperated gas turbine cycle, Applied Thermal Eng., Vol. 21, pp. 1875-1890 https://doi.org/10.1016/S1359-4311(01)00054-0
- Nishida K., Takagi T., and Kinoshita S., 2005, Regenerative steam-injection gas-turbine systems, Applied Energy, Vol. 81, pp. 231-246 https://doi.org/10.1016/j.apenergy.2004.08.002
- Kim K. H., Kim S. W., and Ko H.-1., 2009, Performance analysis of regenerative gas turbine system with afterfogging, Korean J. Air-Conditioning and Refrigeration, Vol. 21, No.8, pp. 448-455
- Cengel Y. A. and Boles M. A., 2006, Thermodynamics. An engineering approach, 5th Ed., McGraw-Hill
- Cengel Y., 2006, Heat and mass transfer. A practical approach, 3rd Ed., McGraw-Hill
- Jeon M. S., Lee J. J., and Kim T. S., 2009, Analysis of performance enhancement of a microturbine by water injection, J. Fluid Machinery, Vol. 12, No. 2, pp. 46-51 https://doi.org/10.5293/KFMA.2009.12.2.046