DOI QR코드

DOI QR Code

Development of Active Seat Suspension with 2 DOF for Agricultural Tractors(I) - Development of Control System for Active Seat Suspension -

농용트랙터를 위한 2자유도를 갖는 능동형 좌석 현가장치 개발(I) - 능동형 좌석 현가장치 제어시스템의 개발 -

  • Published : 2009.10.25

Abstract

Various types of vibration are transmitted to operators of agricultural tractors while working in the field. Most harmful vibration to human body is ride vibrations with low frequency ranging from 1 to 10 Hz, caused by rough terrain. These ride vibration has vertical and rotational components. This study was conducted to develop an active seat suspension system with two degrees of freedoms, enabling effectively reduce vibrations in vertical and pitch motions. Therefore, a mechanism for the active seat suspension was developed, and an electro-hydraulic servo system and a controller to drive the active seat suspension system were also developed in this study. A simulation model was developed to evaluate how the active seat suspension system effectively reduce the vibrations transmitted to the base of seat. Active seat suspension was optimized to enhance the performance using the developed simulation model. The performance of the seat suspension system was evaluated according to the test codes described in EEC78/764 in order to investigate the feasibility of application to agricultural tractors. The result showed that the developed active seat suspension system could reduce the magnitude of vertical vibration up to 80% for the input vibrations according to the test codes described in EEC78/764. The system could reduce the rotational displacement of ${\pm}\;2.5$ degrees up to 50% for the pitch vibration on the average in the frequency range of 1 to 2 Hz.

Keywords

References

  1. Council directive. 1978. 78/764/EEC: On the approximation of the law of the Member States relating to the driver's seat on wheeled agricultural or forestry tractors. Council Committee, European Union.
  2. Griffin, M. J., E. M. Whithm and K. C. Parsons. 1982. Vibration and comfort (I): Translational seat vibration. Ergonomics 25(7):603-630 https://doi.org/10.1080/00140138208925023
  3. Lee, D. H., Y. J. Cho, G. B. Kwon and K. S. Lee 2009. Study on the optimized control system for 2-D uniform leveling on working part of off-road vehicle. Proceeding of KSAM 2009 Winter Conference 14(1):154-158
  4. Lee, S. S., J. H. Mun, K. S. Lee, W. Y. Park, C. H. Lee and H. Hwang. 2005. Development of automatic leveling mechanism and response properties for the slope tractor. Journal of Biosystems Engineering 30(1):1-7. https://doi.org/10.5307/JBE.2005.30.1.001
  5. Lee, S. S., K. S. Oh and H. Hwang. 1999. Implementation and test of hydraulic control system for the tractor leveling. Journal of KSAM 24(5):383-390.
  6. Nevala, K., M. Kangaspuoskari and T. Leinonen. 1996. Development of an active suspension mechanism for the seat vibration damping. Proceedings of the 4th IASTED International Conference (Robotics and Manufacturing):337-339
  7. Pradko, F., T. R. Orr and R. A. Lee. 1965. Human vibration analysis. Transaction of SAE 74:331-339
  8. Radke, A. O. 1957. Vehicle vibration: man's environment. ASME, Paper No. 57-A:54
  9. Samuel, J. K. 2004. Vibration Suppression and Safety Seat Motion Design of a Hyper-active Seat. Master dissertation. Graduate school, Georgia Institute of Technology, Atlanta, Georgia, USA.
  10. Young, R. E. and C. W. Suggs. 1973. An active seat suspension system for isolation of roll and pitch in off-road vehicles, Transactions of the ASAE 16(5):876-880. https://doi.org/10.13031/2013.37649