References
- Bakalis, S. and M. V. Karwe, 2002, Velocity distributions and volume flow rates ín the nip and translational regions of a corotating, self-wiping, twin-screw extruuder, Journal of Food Eng. 51, 273-282 https://doi.org/10.1016/S0260-8774(01)00068-1
- Bravo, V. L. and A. N. Hrymak, 2000, Numerical Simulation of Pressure and Velocity Profiles in Kneading Elements of a CoRotating Twin Screw Extruder, Polymer Eng. and Sci. 40(2), 525-541 https://doi.org/10.1002/pen.11184
- Bravo, V. L., A. N. Hrymak and J. D. Wricht, 2004, Study of Particel Trahectories, Residence Times and Flow Behavior in Kneading Discs of lntermeching Co-Rotating Twin-Screw Extruders, Polymer Eng. and Sci. 44(4), 779-793 https://doi.org/10.1002/pen.20070
- Fenner, R. T., 1977, Development in the analysis of steady screw extrusion of polymers, Polymer 18, 617-635 https://doi.org/10.1016/0032-3861(77)90066-0
- Griffith, R. M., 1962, Fully developed flow in screw extruder, lnd. Eng. Chem. Fundam. 1, 180-187 https://doi.org/10.1021/i160003a004
- Ishikawa, T., S. I. Kihara and K. Funatsu, 2000, 3-D Numerical Simulations of Non-isothermal Flow in Co-Rotating Twin Screw Extruders, Polymer Eng. and Sci. 40(2), 357-364 https://doi.org/10.1002/pen.11169
- Ishikawa, T. and T. Amano, 2002, Flow Pattern and Mixing Mechanisms in the Screw Mixing Element of a Co-Rotating Twin-Screw Extruder, Polymer Eng. and Sci. 42(5), 925-939 https://doi.org/10.1002/pen.11002
- Karwe, M. V. and T. Jaluria, 1990, Numerical simulation of fluid flow and heat transfer in a single screw extruder for non-Newtonian fluids, Numerical heat transfer, Part A: Application 17, 167-190 https://doi.org/10.1080/10407789008944738
- Khalifeh, A. and J. Clermont, 2005, Numerical Simulation of Non-isothermal Three-Dimensional Flows in an Extruder by a Finite Volume Method, J. Non-Newtonian Fluid Mech. 126, 7-22 https://doi.org/10.1016/j.jnnfm.2004.12.002
- Kim, N. S., H. B. Hong and J. W. Lee, 2006, Numerical analysis of internal flow and mixing perfomance in polymer extruder I: single screw element, Korea-Australia Rheology Jol. 18(3), 143-151
- Kim, N. S., H. B. Hong and J. W. Lee, 2006, Numerical analysis of internal flow and mixing performance in polymer extruder II: twin screw element, Korea-Australia Rheology Jol. 18(3), 153-160
- Kim, S. J. and T. H. Kwon, 1996a, Enhancement of mixing performance of single-screw extrusion processes via chaotic flows: Part I, Basic concepts and experimental study, Advances in Ploymer Tech. 15, 41
- Kim, S. J. and T. H. Kwon, 1996b, Enhancement of mixing performance of single-screw extrusion processes via chaotic flows: Part II, Numerical study, Advances in Ploymer Tech. 15, 55 https://doi.org/10.1002/(SICI)1098-2329(199621)15:1<55::AID-ADV5>3.0.CO;2-J
- Kwag, D. S., W. S. Kim, K. S. Lee and M. Y. Lyu, 2001, A three-dimensional numerical study of fluid flow and heat transfer in the single screw extruder, Proceeding of the second International Conference on Computational Heat and Msss Transfer 22-26
- Kwon, T. H., J. W. Joo and S. J. Kim, 1993, Kinematics and deformation characteristics as a mixing measure in the screw extrusion process, Polymer Eng. and Sci. 34, 174-189 https://doi.org/10.1002/pen.760340303
- Lim, J. M., S, Han, S. Jeon, D. Woo and G.l J. Park, 1999, Analysis and Design Considerations of Energy Absorbing Steering System using Orthogonal Arrays, Trans. KSAE 7(6), 144-155
- Linjie, Z., A. N. Kwabena, and S. H. Kun, lnvestigation of Mixing mechanisms and energy balance in reactive extrusion using three-dimensional numerical simulation method, 2005, International Journal of Heat and Mass Transfer 48, 3411-3422 https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.049
- Osswald, T. A. and G. Menges, Material Science of Polymers for Engineers 2nd ed., 2007, Hanser Gardner Pubns. 129-147
- Osswald, T. A. and J. P. Hernandez-Ortiz, Polymer Processing; Modeling and Simulation, 2006, Hanser Gardner Pubns 68-74
- Sastrohartono, T., Y. Jaluria, M. Esseghir and V. Semas, 1994, A numlerical and experimental study of three-dimensional transport in the channel of an extruder for polymeric materials, Int. J. Heat Mass Transfer 38(11), 1957-1973
- Shearer, G. and C. Tzoganakis, 2000, The Effects of Kneading Block Design and Operating Conditions of Distributive Mixing in Twin Screw Extruders, Polymer Eng. and Sci. 40(5), 1095-1106 https://doi.org/10.1002/pen.11237
- Syrjala, S., 1999, On the Analysis of Fluid Flow and Heat Transfer in the Melt Conveying Section of a Single Screw Extruder, Numerical Heat Transfer, Part A 35, 25-47 https://doi.org/10.1080/104077899275353
- Sytjala, S., 2000, Numerical Simulation of Non-isothermal Flow of Polymer MeIt in a Single Screw Extruder: A Validation Study, Numerical Heat Transfer, Part A 37, 897-915 https://doi.org/10.1080/10407780050045883
- Ye, Y. S., H. B. Kim, N. Kim, and J. W. Lee, 2005, A Study on Analysis of Polymer Extruder Process using Finite Element Method, The Korean Society of Mechanical Engineers Part A 29(1), 145-155 https://doi.org/10.3795/KSME-A.2005.29.1.145
- Youn, B.D. and K.K. Choi, 2004, A new Response Surface Methodology for Reliability Based Design Optimization, Computers and Structures 82, 241-256 https://doi.org/10.1016/j.compstruc.2003.09.002
- Yoshinaga, M., S. Katsuki, M. Miyazaki, L. Liu, S. I. Kihara, and K. Funatsu, 2000, Mixing Mechanism of Three-Tip Kneading Block in Twin Screw Extruders, Polymer Eng. and Sci. 40(1), 168-178 https://doi.org/10.1002/pen.11150