Tribology and Lubricants

  • 제25권1호
  • /
  • Pages.49-55
  • /
  • 2009
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

자동차용 마찰재의 연마재가 마찰특성에 미치는 영향

The Effect of Abrasive Particles on the Frictional Properties of Automotive Brake Friction Materials

  • 장호 (고려대학교 신소재공학부) ;
  • 이은주 (고려대학교 신소재공학부) ;
  • 조근형 (고려대학교 신소재공학부)
  • Jang, Ho (Dept. of Materials Science and Engineering, Korea University) ;
  • Lee, Eun-Ju (Dept. of Materials Science and Engineering, Korea University) ;
  • Cho, Keun-Hyung (Dept. of Materials Science and Engineering, Korea University)
  • 발행 : 2009.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The frictional properties of automotive brake pads with four different ceramic materials such as magnesia, hematite, alumina, and zircon were investigated. A Krauss type friction tester using gray iron disks was used to examine the friction coefficient, intensity of friction force oscillation, and the tribe-surfaces. Results showed that the friction coefficient increased as the hardness of abrasives increases. Friction oscillation was also increased with hardness of the abrasives. However, the friction materials containing less abrasive particles produced stable friction films on the sliding surface. The transition between two-body and three body abrasion during sliding also played a crucial role in destructing the friction film on the pad surface and in determining various frictional properties.

키워드

참고문헌

  1. Jang, H. and Kim, S. I., 'The Effect of Antimony Trisulfide and ZÏrconium Silicate in the Automotive Brake Friction Material on Friction Charac-teristics', Wear Vol. 239, pp. 229-236, 2000 https://doi.org/10.1016/S0043-1648(00)00314-8
  2. Ma, T., Martynkova, G S., Valaskova， M., Matijka，v., and Lu, Y, 'Effects of $(ZrSi0_4)$ in Non-meta1lic Brake Friction Materials on Friction Performance', Tribol. lnt., Vol. 41, pp. 166-167, 2008 https://doi.org/10.1016/j.triboint.2007.07.004
  3. Wirth, A., Stone, K., and Whitaker，R, 'A Study of the Relationship Between Transfer Film Chemistry and Friction Performance in Automotive Braking Systems'，SAE Technical Paper， 1992
  4. Chan. D., and Stachowiak, G w., 'Review of Automotive Brake Friction Materials,' Proc. Inst Mech. Eng. Part D-J. Automob. Eng., Vol 218, pp. 57-64, 2003
  5. Cho, M. H., Cho, K. H., Kim, S. J., Kim, D. H., and Jang, H., 'Effects of Ingredients on Tribological Characteristics of a Brake Lining an Experimental Case Study', Wear, Vol. 258, pp. 1682-1687, 2005 https://doi.org/10.1016/j.wear.2004.11.021
  6. Jang, H., Yoon, J. H., Kim, S. J., Lee, J. Y, and Park, H. D., 'The Effect of the Composition and Microstructure of Gray Cast lron on Preferential Wear During Parasitic Drag and on Intrinsic Damping Capacity,' SAE technical paper 2003-01 3313, 2003
  7. Cho, K. H., Jang, H., Hong, Y. S., Kim, S. J., and Basch, R. H., ' The Size Effect of Zircon Particles on the Friction Characteristics of Brake Lining Materia1s', Wear, Vol. 264, pp. 291-297, 2008 https://doi.org/10.1016/j.wear.2007.03.018
  8. Gahlin，R. and Jacobson, S., ' The Particle Size Effect in Abrasion Studied by Controlled Abrasive Surfaces', Wear, Vol. 224, pp. 128-135, 1999
  9. Pellegrin, D. V. D. and Stachowiak, G w., 'Simulation of Three-dimensiona1 Abrasive Particles"， Wear, Vol. 258, pp. 208-216, 2005 https://doi.org/10.1016/j.wear.2004.09.040
  10. Eriksson， M. and Jacobson，S., 'Tribological Surfaces of Organic Brake Pads', Tribology Intemational, Vol. 33, pp. 817-827, 2000 https://doi.org/10.1016/S0301-679X(00)00127-4