Tribology and Lubricants

  • 제25권1호
  • /
  • Pages.38-42
  • /
  • 2009
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

표면아래응력을 고려한 기어이의 크라우닝 최적화에 관한 연구

Optimization of the Gear Tooth Crowning Amount Considering Contact Subsurface Stress

  • Lee, Sang-Don (Dept. of Mechanical Engineeriug, Pusan National University) ;
  • Kim, Jong-Sung (Dept. of Mechanical Engineeriug, Pusan National University) ;
  • Cho, Yong-Joo (Dept. of Mechanical Engineeriug, Pusan National University)
  • 발행 : 2009.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Gear is an essential component of an automotive. Crowning is used for tooth modification of a gear. The basic concept of gear tooth crowning is to reduce the stress concentration in edge of contact area and appropriate profile modifications can help gears to resist scoring, pitting, and tooth breakage. In this study, a method to determinate spur gear tooth crowning amount to make smooth surface stress and subsurface stress distribution is proposed. This method is based on the contact analysis.

키워드

참고문헌

  1. Dudley, D. W., 'Gear Wear', ASME Wear Control Handbook, ed. M. B. Peterson and W. O. Winer, pp. 755-830, 1980
  2. Godfrey, D., 'Diagnosis Wear Mechanics', ASME Wear Control Handbook, ed. M. B. Peterson and W. O. Winer, pp. 283-311 , 1980
  3. Ku. P. M., 'Tribology of Gears and Spline', Proc. Tribology Workshop, NSF, pp. 402-427, 1974
  4. AGMA Standard, 'Nomenclature of Gear Tooth Failure Modes', American Gear Manufacturer Association, ANSIIAGMA, 110.04., 1980
  5. 문석만，김태완，조용주，'고 물림률 Spur Gear의 원활한 허중 전달을 위한 최적 치형 수정에 관한연구', 한국자동차공학회 추계학술대회논문집， pp. 424-430, 1999
  6. Love, A. E. H., 'Stress Produced in a Semi-infinite Solid by Pressure on Part of the Boundary', Phil Trans. Royal Society, A228, pp. 377-420, 1929 https://doi.org/10.1098/rsta.1929.0009
  7. Cho, Y. J., Kim, T. w., and Lee, M. J., 'The Stress Field in Body Caused by the Tangential Force of a Rectangular on a Semi-infinite Solid', KSTLE Înt. J., Vol. 2, No. 1, pp. 29-34, 2000