대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제33권4호
  • /
  • Pages.373-379
  • /
  • 2009
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

유도 초음파를 이용한 락 플레이트 물성 평가

Material Characterization of Lock Plate Using Guided Wave

  • 이재선 (부산대학교 대학원 기계공학부) ;
  • 조윤호 (부산대학교 기계공학부) ;
  • 정경식 (부산대학교 대학원 기계공학부)
  • 발행 : 2009.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Presented in this paper is a new experimental technique to measure material properties of lock plate of gas turbine plants by using ultrasonic guided wave. In comparison with the mechanical destructive testings, material characterization of the Inconel x-750 was nondestructively carried out in a more efficient manner to discriminate the change in elastic moduli and the poisson's ratio attributed to the variation of heat treatment condition. The proposed technique shows a satisfactory feasibility via the comparative experiments with the imported lock plate specimens. It is also expected that the guided wave technique can cover a longer and wider range as a new cost-&-time-saving inspection tool due to the interaction with a greater part of specimen, compared to a conventional local point-by-point scheme.

키워드

참고문헌

  1. Jung, H., 1991, 'A Study in Measurement of Thermal Aging in High Temperature Facility,' Journal of the KSME, Vol. 37, No. 11, pp.251-260
  2. Hur, S. K., Hong, K. T. and Do, J. M., 1988, 'The Measurement of Degradation in Creep-Ruptured Cr-Mo-V Steels by NDE Methods,' Proc. of the 2nd Conference on Mechanical Behaviors of Materials, Seoul, Korea, pp. 17-24
  3. Yamashita, M., Viswanathan, U. K., Yamamoto, I. and Kobayashi, T., 1997, 'Service-induced Changes in the Microstructure and Mechanical Properties of a Cr-Mo-Ni-V Turbine Steel,' ISIJ International, Vol. 37, No. 11, pp. 1133-1138 https://doi.org/10.2355/isijinternational.37.1133
  4. Viswanathan, R. and Bruemmer, S. M., 1985, 'In-Service Degradation of Toughness of Steam Turbine Rotors,' Transactions of the ASME, Vol. 107, pp. 316-324 https://doi.org/10.1115/1.3186004
  5. Rose, J. L., Rajana, K. M. and Carr, F. T., 1994, 'Ultrasonic Guided Wave Inspection Concepts for Steam Generator Tubing,' Material Evaluation, Vol. 52, pp. 307-311
  6. Cho, Y. and Rose, J. L., 1996, 'Guided waves in a Water Loaded Hollow Cylinder,' Nondestructive Testing and Evaluation, Vol. 12, pp. 323-339 https://doi.org/10.1080/10589759608952856
  7. Cho, Y., 1995, 'Defect Detection and Characterization Potential with Guided Waves,' Ph. D. Dissertation, The Pennsylvania State Universit
  8. Younho Cho, J. L Rose, 1996, 'The Study on mode Characteristic of Ultrasonic Guided wave for a Large Structure NDE,' A proceeding of korean Nondestructive Testing, pp. 93-101
  9. Rose, J. L., 1999, Ultrasonic Waves in Solid Media, Cambridge
  10. Younho Cho, 2001, 'Understanding and Application of Ultrasonic Guided Waves,' Journal of korean Nondestructive Testing, Vol. 21, pp. 446-463
  11. Lamb H, 1917, 'On waves in an elastic plate. Proc. Soc,' PT series A. pp. 114-128