참고문헌
- Bishop, R. E. D. and Gladwell, G. M. L., 1959, 'The Vibration and Balancing of an Unbalance Flexible Rotor,' Journal of Mechanical Engineering for Science 1, pp. 66-77 https://doi.org/10.1243/JMES_JOUR_1959_001_010_02
- Lund, J. W. and Tonnesen, J., 1972, 'Analyses and Experiments on Multiplane Balancing of a Flexible Rotor,' Journal of Engineering for Industry, Transactions of the ASME, Vol. 94, pp. 233-242 https://doi.org/10.1115/1.3449906
- Goodman, T. P., 1964, 'A Least Squares Method for Computing Balance Correction Masses,' Journal of Engineering for Industry, Transactions of the ASME, Vol. 8, pp. 273-279
- Rao, J. S., 1996, 'Rotor Dynamics,' New Age International
- Moon, J. D., Kim, B. S., Kim, D. H. and Lee, S. H., 2005, 'A Study on the Active Balancing Device for Spindle System of Machine Tools,' Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 3, pp. 297-305 https://doi.org/10.5050/KSNVN.2005.15.3.297
- Ruhl, R. L. and Booker, J. F., 1972, 'A Finite Element Model for Distributed Parameter Turborotor Systems,' Journal of Engineering for Industry, Transactions of the ASME, Feb., pp. 126-132
- Yee, E. K. L. and Tsuei, Y. G., 1990, 'Transient Response by Component Modal Synthesis Method,' Journal of Vibration and Acoustics, Transactions of the ASME, Vol. 112, pp. 21-25 https://doi.org/10.1115/1.2910349
- Nelson, H. D. and Meacham, W. L., 1983, 'Nonlinear Analysis of Rotor-bearing Systems Using Component Mode Synthesis,' Journal of Engineering for Power, Transactions of the ASME, Vol. 105, pp. 606-614
- Guyan, R. J., 1965, 'Reduction of Stiffness and Mass Matrices,' American Institute of Aeronautics and Astronautics Journal, Vol. 3, No. 2, p. 380 https://doi.org/10.2514/3.2874
- Nelson, H. D. and McVaugh. J. M., 1976, 'The Dynamics of Rotor-bearing Systems Using Finite Elements,' J. Eng. For Industry, Transactions of the ASME, May, pp. 593-600
- Nelson, H. D., 1980, 'A Finite Rotating Shaft Element Using Timoshenko Beam Theory,' Journal of Mechanical Design, Vol. 102, pp. 793-803 https://doi.org/10.1115/1.3254824
- Ozguven, H. N. and Ozkan, Z. L., 1984, 'Whirl Speeds and Unbalance Response of Mechanical Bearing Rotors Using Finite Elements,' J. of Vibration, Acoustics, and Reliability in Design, Vol. 106, pp. 72-79 https://doi.org/10.1115/1.3269158
- Rahman, B. S. and Lieu, D. K., 1991, 'The Origin of Permanent Magnet Induced Vibration in Electric Machines,' J. of Vibration and Acoustics, Vol. 113, p. 476 https://doi.org/10.1115/1.2930211
- Houbolt, J. C., 1950, 'A Recurrence Matrix Solution for the Dynamic Response of Elastic Aircraft,' Journal of the Aeronautical Sciences, Vol.17, pp. 540-550 https://doi.org/10.2514/8.1722
- Subbiah, R. and Kumar, A. S., 1988, 'Transient Dynamic Analysis of Rotors Using the Combined Methodologies of Finite Elements and Transfer Matrix,' Journal of Applied Mechanics, Trans. ASME, Vol. 55, pp. 448-452 https://doi.org/10.1115/1.3173697
- Kumar, A. S. and Sankar, T. S., 1986, 'A New Transfer Matrix Method for Response Analysis of Large Dynamic Systems,' Computer and Structures, Vol. 23, No. 4, pp. 545-552 https://doi.org/10.1016/0045-7949(86)90097-0
- Cao, Y., 2006, 'Modeling of High-speed Machine Tool Spindle Systems,' Ph. D. Thesis, The University of British Columbia
- Wang, K. F., Shin, Y. C. and Chen, C. H., 1991, 'On the Natural frequencies of High-speed Spindles with Angular Contact 'Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 205, Issue C3 pp. 147-154 https://doi.org/10.1243/PIME_PROC_1991_205_105_02
- Shin, Y. C., 1992, 'Bearing Nonlinearity and Stability Analysis in High Speed Machining,' ASME, J. Eng. Sci. Ind., Vol. 114, No. 1, pp. 23-30
- ISO 1940/1 'Mechanical Vibration – Balance Quality Requirements of Rigid Rotors'